diff options
Diffstat (limited to 'WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include')
78 files changed, 47138 insertions, 0 deletions
diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL.h new file mode 100644 index 0000000..12e7f31 --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL.h @@ -0,0 +1,233 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL.h + * + * Main include header for the SDL library + */ + + +#ifndef SDL_h_ +#define SDL_h_ + +#include "SDL_main.h" +#include "SDL_stdinc.h" +#include "SDL_assert.h" +#include "SDL_atomic.h" +#include "SDL_audio.h" +#include "SDL_clipboard.h" +#include "SDL_cpuinfo.h" +#include "SDL_endian.h" +#include "SDL_error.h" +#include "SDL_events.h" +#include "SDL_filesystem.h" +#include "SDL_gamecontroller.h" +#include "SDL_guid.h" +#include "SDL_haptic.h" +#include "SDL_hidapi.h" +#include "SDL_hints.h" +#include "SDL_joystick.h" +#include "SDL_loadso.h" +#include "SDL_log.h" +#include "SDL_messagebox.h" +#include "SDL_metal.h" +#include "SDL_mutex.h" +#include "SDL_power.h" +#include "SDL_render.h" +#include "SDL_rwops.h" +#include "SDL_sensor.h" +#include "SDL_shape.h" +#include "SDL_system.h" +#include "SDL_thread.h" +#include "SDL_timer.h" +#include "SDL_version.h" +#include "SDL_video.h" +#include "SDL_locale.h" +#include "SDL_misc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* As of version 0.5, SDL is loaded dynamically into the application */ + +/** + * \name SDL_INIT_* + * + * These are the flags which may be passed to SDL_Init(). You should + * specify the subsystems which you will be using in your application. + */ +/* @{ */ +#define SDL_INIT_TIMER 0x00000001u +#define SDL_INIT_AUDIO 0x00000010u +#define SDL_INIT_VIDEO 0x00000020u /**< SDL_INIT_VIDEO implies SDL_INIT_EVENTS */ +#define SDL_INIT_JOYSTICK 0x00000200u /**< SDL_INIT_JOYSTICK implies SDL_INIT_EVENTS */ +#define SDL_INIT_HAPTIC 0x00001000u +#define SDL_INIT_GAMECONTROLLER 0x00002000u /**< SDL_INIT_GAMECONTROLLER implies SDL_INIT_JOYSTICK */ +#define SDL_INIT_EVENTS 0x00004000u +#define SDL_INIT_SENSOR 0x00008000u +#define SDL_INIT_NOPARACHUTE 0x00100000u /**< compatibility; this flag is ignored. */ +#define SDL_INIT_EVERYTHING ( \ + SDL_INIT_TIMER | SDL_INIT_AUDIO | SDL_INIT_VIDEO | SDL_INIT_EVENTS | \ + SDL_INIT_JOYSTICK | SDL_INIT_HAPTIC | SDL_INIT_GAMECONTROLLER | SDL_INIT_SENSOR \ + ) +/* @} */ + +/** + * Initialize the SDL library. + * + * SDL_Init() simply forwards to calling SDL_InitSubSystem(). Therefore, the + * two may be used interchangeably. Though for readability of your code + * SDL_InitSubSystem() might be preferred. + * + * The file I/O (for example: SDL_RWFromFile) and threading (SDL_CreateThread) + * subsystems are initialized by default. Message boxes + * (SDL_ShowSimpleMessageBox) also attempt to work without initializing the + * video subsystem, in hopes of being useful in showing an error dialog when + * SDL_Init fails. You must specifically initialize other subsystems if you + * use them in your application. + * + * Logging (such as SDL_Log) works without initialization, too. + * + * `flags` may be any of the following OR'd together: + * + * - `SDL_INIT_TIMER`: timer subsystem + * - `SDL_INIT_AUDIO`: audio subsystem + * - `SDL_INIT_VIDEO`: video subsystem; automatically initializes the events + * subsystem + * - `SDL_INIT_JOYSTICK`: joystick subsystem; automatically initializes the + * events subsystem + * - `SDL_INIT_HAPTIC`: haptic (force feedback) subsystem + * - `SDL_INIT_GAMECONTROLLER`: controller subsystem; automatically + * initializes the joystick subsystem + * - `SDL_INIT_EVENTS`: events subsystem + * - `SDL_INIT_EVERYTHING`: all of the above subsystems + * - `SDL_INIT_NOPARACHUTE`: compatibility; this flag is ignored + * + * Subsystem initialization is ref-counted, you must call SDL_QuitSubSystem() + * for each SDL_InitSubSystem() to correctly shutdown a subsystem manually (or + * call SDL_Quit() to force shutdown). If a subsystem is already loaded then + * this call will increase the ref-count and return. + * + * \param flags subsystem initialization flags + * \returns 0 on success or a negative error code on failure; call + * SDL_GetError() for more information. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_InitSubSystem + * \sa SDL_Quit + * \sa SDL_SetMainReady + * \sa SDL_WasInit + */ +extern DECLSPEC int SDLCALL SDL_Init(Uint32 flags); + +/** + * Compatibility function to initialize the SDL library. + * + * In SDL2, this function and SDL_Init() are interchangeable. + * + * \param flags any of the flags used by SDL_Init(); see SDL_Init for details. + * \returns 0 on success or a negative error code on failure; call + * SDL_GetError() for more information. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_Init + * \sa SDL_Quit + * \sa SDL_QuitSubSystem + */ +extern DECLSPEC int SDLCALL SDL_InitSubSystem(Uint32 flags); + +/** + * Shut down specific SDL subsystems. + * + * If you start a subsystem using a call to that subsystem's init function + * (for example SDL_VideoInit()) instead of SDL_Init() or SDL_InitSubSystem(), + * SDL_QuitSubSystem() and SDL_WasInit() will not work. You will need to use + * that subsystem's quit function (SDL_VideoQuit()) directly instead. But + * generally, you should not be using those functions directly anyhow; use + * SDL_Init() instead. + * + * You still need to call SDL_Quit() even if you close all open subsystems + * with SDL_QuitSubSystem(). + * + * \param flags any of the flags used by SDL_Init(); see SDL_Init for details. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_InitSubSystem + * \sa SDL_Quit + */ +extern DECLSPEC void SDLCALL SDL_QuitSubSystem(Uint32 flags); + +/** + * Get a mask of the specified subsystems which are currently initialized. + * + * \param flags any of the flags used by SDL_Init(); see SDL_Init for details. + * \returns a mask of all initialized subsystems if `flags` is 0, otherwise it + * returns the initialization status of the specified subsystems. + * + * The return value does not include SDL_INIT_NOPARACHUTE. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_Init + * \sa SDL_InitSubSystem + */ +extern DECLSPEC Uint32 SDLCALL SDL_WasInit(Uint32 flags); + +/** + * Clean up all initialized subsystems. + * + * You should call this function even if you have already shutdown each + * initialized subsystem with SDL_QuitSubSystem(). It is safe to call this + * function even in the case of errors in initialization. + * + * If you start a subsystem using a call to that subsystem's init function + * (for example SDL_VideoInit()) instead of SDL_Init() or SDL_InitSubSystem(), + * then you must use that subsystem's quit function (SDL_VideoQuit()) to shut + * it down before calling SDL_Quit(). But generally, you should not be using + * those functions directly anyhow; use SDL_Init() instead. + * + * You can use this function with atexit() to ensure that it is run when your + * application is shutdown, but it is not wise to do this from a library or + * other dynamically loaded code. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_Init + * \sa SDL_QuitSubSystem + */ +extern DECLSPEC void SDLCALL SDL_Quit(void); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_assert.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_assert.h new file mode 100644 index 0000000..e71cf97 --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_assert.h @@ -0,0 +1,326 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef SDL_assert_h_ +#define SDL_assert_h_ + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef SDL_ASSERT_LEVEL +#ifdef SDL_DEFAULT_ASSERT_LEVEL +#define SDL_ASSERT_LEVEL SDL_DEFAULT_ASSERT_LEVEL +#elif defined(_DEBUG) || defined(DEBUG) || \ + (defined(__GNUC__) && !defined(__OPTIMIZE__)) +#define SDL_ASSERT_LEVEL 2 +#else +#define SDL_ASSERT_LEVEL 1 +#endif +#endif /* SDL_ASSERT_LEVEL */ + +/* +These are macros and not first class functions so that the debugger breaks +on the assertion line and not in some random guts of SDL, and so each +assert can have unique static variables associated with it. +*/ + +#if defined(_MSC_VER) +/* Don't include intrin.h here because it contains C++ code */ + extern void __cdecl __debugbreak(void); + #define SDL_TriggerBreakpoint() __debugbreak() +#elif _SDL_HAS_BUILTIN(__builtin_debugtrap) + #define SDL_TriggerBreakpoint() __builtin_debugtrap() +#elif ( (!defined(__NACL__)) && ((defined(__GNUC__) || defined(__clang__)) && (defined(__i386__) || defined(__x86_64__))) ) + #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "int $3\n\t" ) +#elif ( defined(__APPLE__) && (defined(__arm64__) || defined(__aarch64__)) ) /* this might work on other ARM targets, but this is a known quantity... */ + #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "brk #22\n\t" ) +#elif defined(__APPLE__) && defined(__arm__) + #define SDL_TriggerBreakpoint() __asm__ __volatile__ ( "bkpt #22\n\t" ) +#elif defined(__386__) && defined(__WATCOMC__) + #define SDL_TriggerBreakpoint() { _asm { int 0x03 } } +#elif defined(HAVE_SIGNAL_H) && !defined(__WATCOMC__) + #include <signal.h> + #define SDL_TriggerBreakpoint() raise(SIGTRAP) +#else + /* How do we trigger breakpoints on this platform? */ + #define SDL_TriggerBreakpoint() +#endif + +#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) /* C99 supports __func__ as a standard. */ +# define SDL_FUNCTION __func__ +#elif ((defined(__GNUC__) && (__GNUC__ >= 2)) || defined(_MSC_VER) || defined (__WATCOMC__)) +# define SDL_FUNCTION __FUNCTION__ +#else +# define SDL_FUNCTION "???" +#endif +#define SDL_FILE __FILE__ +#define SDL_LINE __LINE__ + +/* +sizeof (x) makes the compiler still parse the expression even without +assertions enabled, so the code is always checked at compile time, but +doesn't actually generate code for it, so there are no side effects or +expensive checks at run time, just the constant size of what x WOULD be, +which presumably gets optimized out as unused. +This also solves the problem of... + + int somevalue = blah(); + SDL_assert(somevalue == 1); + +...which would cause compiles to complain that somevalue is unused if we +disable assertions. +*/ + +/* "while (0,0)" fools Microsoft's compiler's /W4 warning level into thinking + this condition isn't constant. And looks like an owl's face! */ +#ifdef _MSC_VER /* stupid /W4 warnings. */ +#define SDL_NULL_WHILE_LOOP_CONDITION (0,0) +#else +#define SDL_NULL_WHILE_LOOP_CONDITION (0) +#endif + +#define SDL_disabled_assert(condition) \ + do { (void) sizeof ((condition)); } while (SDL_NULL_WHILE_LOOP_CONDITION) + +typedef enum +{ + SDL_ASSERTION_RETRY, /**< Retry the assert immediately. */ + SDL_ASSERTION_BREAK, /**< Make the debugger trigger a breakpoint. */ + SDL_ASSERTION_ABORT, /**< Terminate the program. */ + SDL_ASSERTION_IGNORE, /**< Ignore the assert. */ + SDL_ASSERTION_ALWAYS_IGNORE /**< Ignore the assert from now on. */ +} SDL_AssertState; + +typedef struct SDL_AssertData +{ + int always_ignore; + unsigned int trigger_count; + const char *condition; + const char *filename; + int linenum; + const char *function; + const struct SDL_AssertData *next; +} SDL_AssertData; + +#if (SDL_ASSERT_LEVEL > 0) + +/* Never call this directly. Use the SDL_assert* macros. */ +extern DECLSPEC SDL_AssertState SDLCALL SDL_ReportAssertion(SDL_AssertData *, + const char *, + const char *, int) +#if defined(__clang__) +#if __has_feature(attribute_analyzer_noreturn) +/* this tells Clang's static analysis that we're a custom assert function, + and that the analyzer should assume the condition was always true past this + SDL_assert test. */ + __attribute__((analyzer_noreturn)) +#endif +#endif +; + +/* the do {} while(0) avoids dangling else problems: + if (x) SDL_assert(y); else blah(); + ... without the do/while, the "else" could attach to this macro's "if". + We try to handle just the minimum we need here in a macro...the loop, + the static vars, and break points. The heavy lifting is handled in + SDL_ReportAssertion(), in SDL_assert.c. +*/ +#define SDL_enabled_assert(condition) \ + do { \ + while ( !(condition) ) { \ + static struct SDL_AssertData sdl_assert_data = { \ + 0, 0, #condition, 0, 0, 0, 0 \ + }; \ + const SDL_AssertState sdl_assert_state = SDL_ReportAssertion(&sdl_assert_data, SDL_FUNCTION, SDL_FILE, SDL_LINE); \ + if (sdl_assert_state == SDL_ASSERTION_RETRY) { \ + continue; /* go again. */ \ + } else if (sdl_assert_state == SDL_ASSERTION_BREAK) { \ + SDL_TriggerBreakpoint(); \ + } \ + break; /* not retrying. */ \ + } \ + } while (SDL_NULL_WHILE_LOOP_CONDITION) + +#endif /* enabled assertions support code */ + +/* Enable various levels of assertions. */ +#if SDL_ASSERT_LEVEL == 0 /* assertions disabled */ +# define SDL_assert(condition) SDL_disabled_assert(condition) +# define SDL_assert_release(condition) SDL_disabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 1 /* release settings. */ +# define SDL_assert(condition) SDL_disabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 2 /* normal settings. */ +# define SDL_assert(condition) SDL_enabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_disabled_assert(condition) +#elif SDL_ASSERT_LEVEL == 3 /* paranoid settings. */ +# define SDL_assert(condition) SDL_enabled_assert(condition) +# define SDL_assert_release(condition) SDL_enabled_assert(condition) +# define SDL_assert_paranoid(condition) SDL_enabled_assert(condition) +#else +# error Unknown assertion level. +#endif + +/* this assertion is never disabled at any level. */ +#define SDL_assert_always(condition) SDL_enabled_assert(condition) + + +/** + * A callback that fires when an SDL assertion fails. + * + * \param data a pointer to the SDL_AssertData structure corresponding to the + * current assertion + * \param userdata what was passed as `userdata` to SDL_SetAssertionHandler() + * \returns an SDL_AssertState value indicating how to handle the failure. + */ +typedef SDL_AssertState (SDLCALL *SDL_AssertionHandler)( + const SDL_AssertData* data, void* userdata); + +/** + * Set an application-defined assertion handler. + * + * This function allows an application to show its own assertion UI and/or + * force the response to an assertion failure. If the application doesn't + * provide this, SDL will try to do the right thing, popping up a + * system-specific GUI dialog, and probably minimizing any fullscreen windows. + * + * This callback may fire from any thread, but it runs wrapped in a mutex, so + * it will only fire from one thread at a time. + * + * This callback is NOT reset to SDL's internal handler upon SDL_Quit()! + * + * \param handler the SDL_AssertionHandler function to call when an assertion + * fails or NULL for the default handler + * \param userdata a pointer that is passed to `handler` + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetAssertionHandler + */ +extern DECLSPEC void SDLCALL SDL_SetAssertionHandler( + SDL_AssertionHandler handler, + void *userdata); + +/** + * Get the default assertion handler. + * + * This returns the function pointer that is called by default when an + * assertion is triggered. This is an internal function provided by SDL, that + * is used for assertions when SDL_SetAssertionHandler() hasn't been used to + * provide a different function. + * + * \returns the default SDL_AssertionHandler that is called when an assert + * triggers. + * + * \since This function is available since SDL 2.0.2. + * + * \sa SDL_GetAssertionHandler + */ +extern DECLSPEC SDL_AssertionHandler SDLCALL SDL_GetDefaultAssertionHandler(void); + +/** + * Get the current assertion handler. + * + * This returns the function pointer that is called when an assertion is + * triggered. This is either the value last passed to + * SDL_SetAssertionHandler(), or if no application-specified function is set, + * is equivalent to calling SDL_GetDefaultAssertionHandler(). + * + * The parameter `puserdata` is a pointer to a void*, which will store the + * "userdata" pointer that was passed to SDL_SetAssertionHandler(). This value + * will always be NULL for the default handler. If you don't care about this + * data, it is safe to pass a NULL pointer to this function to ignore it. + * + * \param puserdata pointer which is filled with the "userdata" pointer that + * was passed to SDL_SetAssertionHandler() + * \returns the SDL_AssertionHandler that is called when an assert triggers. + * + * \since This function is available since SDL 2.0.2. + * + * \sa SDL_SetAssertionHandler + */ +extern DECLSPEC SDL_AssertionHandler SDLCALL SDL_GetAssertionHandler(void **puserdata); + +/** + * Get a list of all assertion failures. + * + * This function gets all assertions triggered since the last call to + * SDL_ResetAssertionReport(), or the start of the program. + * + * The proper way to examine this data looks something like this: + * + * ```c + * const SDL_AssertData *item = SDL_GetAssertionReport(); + * while (item) { + * printf("'%s', %s (%s:%d), triggered %u times, always ignore: %s.\\n", + * item->condition, item->function, item->filename, + * item->linenum, item->trigger_count, + * item->always_ignore ? "yes" : "no"); + * item = item->next; + * } + * ``` + * + * \returns a list of all failed assertions or NULL if the list is empty. This + * memory should not be modified or freed by the application. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_ResetAssertionReport + */ +extern DECLSPEC const SDL_AssertData * SDLCALL SDL_GetAssertionReport(void); + +/** + * Clear the list of all assertion failures. + * + * This function will clear the list of all assertions triggered up to that + * point. Immediately following this call, SDL_GetAssertionReport will return + * no items. In addition, any previously-triggered assertions will be reset to + * a trigger_count of zero, and their always_ignore state will be false. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetAssertionReport + */ +extern DECLSPEC void SDLCALL SDL_ResetAssertionReport(void); + + +/* these had wrong naming conventions until 2.0.4. Please update your app! */ +#define SDL_assert_state SDL_AssertState +#define SDL_assert_data SDL_AssertData + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_assert_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_atomic.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_atomic.h new file mode 100644 index 0000000..2eace20 --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_atomic.h @@ -0,0 +1,415 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_atomic.h + * + * Atomic operations. + * + * IMPORTANT: + * If you are not an expert in concurrent lockless programming, you should + * only be using the atomic lock and reference counting functions in this + * file. In all other cases you should be protecting your data structures + * with full mutexes. + * + * The list of "safe" functions to use are: + * SDL_AtomicLock() + * SDL_AtomicUnlock() + * SDL_AtomicIncRef() + * SDL_AtomicDecRef() + * + * Seriously, here be dragons! + * ^^^^^^^^^^^^^^^^^^^^^^^^^^^ + * + * You can find out a little more about lockless programming and the + * subtle issues that can arise here: + * http://msdn.microsoft.com/en-us/library/ee418650%28v=vs.85%29.aspx + * + * There's also lots of good information here: + * http://www.1024cores.net/home/lock-free-algorithms + * http://preshing.com/ + * + * These operations may or may not actually be implemented using + * processor specific atomic operations. When possible they are + * implemented as true processor specific atomic operations. When that + * is not possible the are implemented using locks that *do* use the + * available atomic operations. + * + * All of the atomic operations that modify memory are full memory barriers. + */ + +#ifndef SDL_atomic_h_ +#define SDL_atomic_h_ + +#include "SDL_stdinc.h" +#include "SDL_platform.h" + +#include "begin_code.h" + +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \name SDL AtomicLock + * + * The atomic locks are efficient spinlocks using CPU instructions, + * but are vulnerable to starvation and can spin forever if a thread + * holding a lock has been terminated. For this reason you should + * minimize the code executed inside an atomic lock and never do + * expensive things like API or system calls while holding them. + * + * The atomic locks are not safe to lock recursively. + * + * Porting Note: + * The spin lock functions and type are required and can not be + * emulated because they are used in the atomic emulation code. + */ +/* @{ */ + +typedef int SDL_SpinLock; + +/** + * Try to lock a spin lock by setting it to a non-zero value. + * + * ***Please note that spinlocks are dangerous if you don't know what you're + * doing. Please be careful using any sort of spinlock!*** + * + * \param lock a pointer to a lock variable + * \returns SDL_TRUE if the lock succeeded, SDL_FALSE if the lock is already + * held. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_AtomicLock + * \sa SDL_AtomicUnlock + */ +extern DECLSPEC SDL_bool SDLCALL SDL_AtomicTryLock(SDL_SpinLock *lock); + +/** + * Lock a spin lock by setting it to a non-zero value. + * + * ***Please note that spinlocks are dangerous if you don't know what you're + * doing. Please be careful using any sort of spinlock!*** + * + * \param lock a pointer to a lock variable + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_AtomicTryLock + * \sa SDL_AtomicUnlock + */ +extern DECLSPEC void SDLCALL SDL_AtomicLock(SDL_SpinLock *lock); + +/** + * Unlock a spin lock by setting it to 0. + * + * Always returns immediately. + * + * ***Please note that spinlocks are dangerous if you don't know what you're + * doing. Please be careful using any sort of spinlock!*** + * + * \param lock a pointer to a lock variable + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_AtomicLock + * \sa SDL_AtomicTryLock + */ +extern DECLSPEC void SDLCALL SDL_AtomicUnlock(SDL_SpinLock *lock); + +/* @} *//* SDL AtomicLock */ + + +/** + * The compiler barrier prevents the compiler from reordering + * reads and writes to globally visible variables across the call. + */ +#if defined(_MSC_VER) && (_MSC_VER > 1200) && !defined(__clang__) +void _ReadWriteBarrier(void); +#pragma intrinsic(_ReadWriteBarrier) +#define SDL_CompilerBarrier() _ReadWriteBarrier() +#elif (defined(__GNUC__) && !defined(__EMSCRIPTEN__)) || (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x5120)) +/* This is correct for all CPUs when using GCC or Solaris Studio 12.1+. */ +#define SDL_CompilerBarrier() __asm__ __volatile__ ("" : : : "memory") +#elif defined(__WATCOMC__) +extern __inline void SDL_CompilerBarrier(void); +#pragma aux SDL_CompilerBarrier = "" parm [] modify exact []; +#else +#define SDL_CompilerBarrier() \ +{ SDL_SpinLock _tmp = 0; SDL_AtomicLock(&_tmp); SDL_AtomicUnlock(&_tmp); } +#endif + +/** + * Memory barriers are designed to prevent reads and writes from being + * reordered by the compiler and being seen out of order on multi-core CPUs. + * + * A typical pattern would be for thread A to write some data and a flag, and + * for thread B to read the flag and get the data. In this case you would + * insert a release barrier between writing the data and the flag, + * guaranteeing that the data write completes no later than the flag is + * written, and you would insert an acquire barrier between reading the flag + * and reading the data, to ensure that all the reads associated with the flag + * have completed. + * + * In this pattern you should always see a release barrier paired with an + * acquire barrier and you should gate the data reads/writes with a single + * flag variable. + * + * For more information on these semantics, take a look at the blog post: + * http://preshing.com/20120913/acquire-and-release-semantics + * + * \since This function is available since SDL 2.0.6. + */ +extern DECLSPEC void SDLCALL SDL_MemoryBarrierReleaseFunction(void); +extern DECLSPEC void SDLCALL SDL_MemoryBarrierAcquireFunction(void); + +#if defined(__GNUC__) && (defined(__powerpc__) || defined(__ppc__)) +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("lwsync" : : : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("lwsync" : : : "memory") +#elif defined(__GNUC__) && defined(__aarch64__) +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("dmb ish" : : : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("dmb ish" : : : "memory") +#elif defined(__GNUC__) && defined(__arm__) +#if 0 /* defined(__LINUX__) || defined(__ANDROID__) */ +/* Information from: + https://chromium.googlesource.com/chromium/chromium/+/trunk/base/atomicops_internals_arm_gcc.h#19 + + The Linux kernel provides a helper function which provides the right code for a memory barrier, + hard-coded at address 0xffff0fa0 +*/ +typedef void (*SDL_KernelMemoryBarrierFunc)(); +#define SDL_MemoryBarrierRelease() ((SDL_KernelMemoryBarrierFunc)0xffff0fa0)() +#define SDL_MemoryBarrierAcquire() ((SDL_KernelMemoryBarrierFunc)0xffff0fa0)() +#elif 0 /* defined(__QNXNTO__) */ +#include <sys/cpuinline.h> + +#define SDL_MemoryBarrierRelease() __cpu_membarrier() +#define SDL_MemoryBarrierAcquire() __cpu_membarrier() +#else +#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_7R__) || defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7S__) || defined(__ARM_ARCH_8A__) +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("dmb ish" : : : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("dmb ish" : : : "memory") +#elif defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6T2__) || defined(__ARM_ARCH_6Z__) || defined(__ARM_ARCH_6ZK__) || defined(__ARM_ARCH_5TE__) +#ifdef __thumb__ +/* The mcr instruction isn't available in thumb mode, use real functions */ +#define SDL_MEMORY_BARRIER_USES_FUNCTION +#define SDL_MemoryBarrierRelease() SDL_MemoryBarrierReleaseFunction() +#define SDL_MemoryBarrierAcquire() SDL_MemoryBarrierAcquireFunction() +#else +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" : : "r"(0) : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" : : "r"(0) : "memory") +#endif /* __thumb__ */ +#else +#define SDL_MemoryBarrierRelease() __asm__ __volatile__ ("" : : : "memory") +#define SDL_MemoryBarrierAcquire() __asm__ __volatile__ ("" : : : "memory") +#endif /* __LINUX__ || __ANDROID__ */ +#endif /* __GNUC__ && __arm__ */ +#else +#if (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x5120)) +/* This is correct for all CPUs on Solaris when using Solaris Studio 12.1+. */ +#include <mbarrier.h> +#define SDL_MemoryBarrierRelease() __machine_rel_barrier() +#define SDL_MemoryBarrierAcquire() __machine_acq_barrier() +#else +/* This is correct for the x86 and x64 CPUs, and we'll expand this over time. */ +#define SDL_MemoryBarrierRelease() SDL_CompilerBarrier() +#define SDL_MemoryBarrierAcquire() SDL_CompilerBarrier() +#endif +#endif + +/* "REP NOP" is PAUSE, coded for tools that don't know it by that name. */ +#if (defined(__GNUC__) || defined(__clang__)) && (defined(__i386__) || defined(__x86_64__)) + #define SDL_CPUPauseInstruction() __asm__ __volatile__("pause\n") /* Some assemblers can't do REP NOP, so go with PAUSE. */ +#elif (defined(__arm__) && __ARM_ARCH__ >= 7) || defined(__aarch64__) + #define SDL_CPUPauseInstruction() __asm__ __volatile__("yield" ::: "memory") +#elif (defined(__powerpc__) || defined(__powerpc64__)) + #define SDL_CPUPauseInstruction() __asm__ __volatile__("or 27,27,27"); +#elif defined(_MSC_VER) && (defined(_M_IX86) || defined(_M_X64)) + #define SDL_CPUPauseInstruction() _mm_pause() /* this is actually "rep nop" and not a SIMD instruction. No inline asm in MSVC x86-64! */ +#elif defined(_MSC_VER) && (defined(_M_ARM) || defined(_M_ARM64)) + #define SDL_CPUPauseInstruction() __yield() +#elif defined(__WATCOMC__) && defined(__386__) + /* watcom assembler rejects PAUSE if CPU < i686, and it refuses REP NOP as an invalid combination. Hardcode the bytes. */ + extern __inline void SDL_CPUPauseInstruction(void); + #pragma aux SDL_CPUPauseInstruction = "db 0f3h,90h" +#else + #define SDL_CPUPauseInstruction() +#endif + + +/** + * \brief A type representing an atomic integer value. It is a struct + * so people don't accidentally use numeric operations on it. + */ +typedef struct { int value; } SDL_atomic_t; + +/** + * Set an atomic variable to a new value if it is currently an old value. + * + * ***Note: If you don't know what this function is for, you shouldn't use + * it!*** + * + * \param a a pointer to an SDL_atomic_t variable to be modified + * \param oldval the old value + * \param newval the new value + * \returns SDL_TRUE if the atomic variable was set, SDL_FALSE otherwise. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_AtomicCASPtr + * \sa SDL_AtomicGet + * \sa SDL_AtomicSet + */ +extern DECLSPEC SDL_bool SDLCALL SDL_AtomicCAS(SDL_atomic_t *a, int oldval, int newval); + +/** + * Set an atomic variable to a value. + * + * This function also acts as a full memory barrier. + * + * ***Note: If you don't know what this function is for, you shouldn't use + * it!*** + * + * \param a a pointer to an SDL_atomic_t variable to be modified + * \param v the desired value + * \returns the previous value of the atomic variable. + * + * \since This function is available since SDL 2.0.2. + * + * \sa SDL_AtomicGet + */ +extern DECLSPEC int SDLCALL SDL_AtomicSet(SDL_atomic_t *a, int v); + +/** + * Get the value of an atomic variable. + * + * ***Note: If you don't know what this function is for, you shouldn't use + * it!*** + * + * \param a a pointer to an SDL_atomic_t variable + * \returns the current value of an atomic variable. + * + * \since This function is available since SDL 2.0.2. + * + * \sa SDL_AtomicSet + */ +extern DECLSPEC int SDLCALL SDL_AtomicGet(SDL_atomic_t *a); + +/** + * Add to an atomic variable. + * + * This function also acts as a full memory barrier. + * + * ***Note: If you don't know what this function is for, you shouldn't use + * it!*** + * + * \param a a pointer to an SDL_atomic_t variable to be modified + * \param v the desired value to add + * \returns the previous value of the atomic variable. + * + * \since This function is available since SDL 2.0.2. + * + * \sa SDL_AtomicDecRef + * \sa SDL_AtomicIncRef + */ +extern DECLSPEC int SDLCALL SDL_AtomicAdd(SDL_atomic_t *a, int v); + +/** + * \brief Increment an atomic variable used as a reference count. + */ +#ifndef SDL_AtomicIncRef +#define SDL_AtomicIncRef(a) SDL_AtomicAdd(a, 1) +#endif + +/** + * \brief Decrement an atomic variable used as a reference count. + * + * \return SDL_TRUE if the variable reached zero after decrementing, + * SDL_FALSE otherwise + */ +#ifndef SDL_AtomicDecRef +#define SDL_AtomicDecRef(a) (SDL_AtomicAdd(a, -1) == 1) +#endif + +/** + * Set a pointer to a new value if it is currently an old value. + * + * ***Note: If you don't know what this function is for, you shouldn't use + * it!*** + * + * \param a a pointer to a pointer + * \param oldval the old pointer value + * \param newval the new pointer value + * \returns SDL_TRUE if the pointer was set, SDL_FALSE otherwise. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_AtomicCAS + * \sa SDL_AtomicGetPtr + * \sa SDL_AtomicSetPtr + */ +extern DECLSPEC SDL_bool SDLCALL SDL_AtomicCASPtr(void **a, void *oldval, void *newval); + +/** + * Set a pointer to a value atomically. + * + * ***Note: If you don't know what this function is for, you shouldn't use + * it!*** + * + * \param a a pointer to a pointer + * \param v the desired pointer value + * \returns the previous value of the pointer. + * + * \since This function is available since SDL 2.0.2. + * + * \sa SDL_AtomicCASPtr + * \sa SDL_AtomicGetPtr + */ +extern DECLSPEC void* SDLCALL SDL_AtomicSetPtr(void **a, void* v); + +/** + * Get the value of a pointer atomically. + * + * ***Note: If you don't know what this function is for, you shouldn't use + * it!*** + * + * \param a a pointer to a pointer + * \returns the current value of a pointer. + * + * \since This function is available since SDL 2.0.2. + * + * \sa SDL_AtomicCASPtr + * \sa SDL_AtomicSetPtr + */ +extern DECLSPEC void* SDLCALL SDL_AtomicGetPtr(void **a); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif + +#include "close_code.h" + +#endif /* SDL_atomic_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_audio.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_audio.h new file mode 100644 index 0000000..c42de3e --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_audio.h @@ -0,0 +1,1500 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/* !!! FIXME: several functions in here need Doxygen comments. */ + +/** + * \file SDL_audio.h + * + * Access to the raw audio mixing buffer for the SDL library. + */ + +#ifndef SDL_audio_h_ +#define SDL_audio_h_ + +#include "SDL_stdinc.h" +#include "SDL_error.h" +#include "SDL_endian.h" +#include "SDL_mutex.h" +#include "SDL_thread.h" +#include "SDL_rwops.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Audio format flags. + * + * These are what the 16 bits in SDL_AudioFormat currently mean... + * (Unspecified bits are always zero). + * + * \verbatim + ++-----------------------sample is signed if set + || + || ++-----------sample is bigendian if set + || || + || || ++---sample is float if set + || || || + || || || +---sample bit size---+ + || || || | | + 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00 + \endverbatim + * + * There are macros in SDL 2.0 and later to query these bits. + */ +typedef Uint16 SDL_AudioFormat; + +/** + * \name Audio flags + */ +/* @{ */ + +#define SDL_AUDIO_MASK_BITSIZE (0xFF) +#define SDL_AUDIO_MASK_DATATYPE (1<<8) +#define SDL_AUDIO_MASK_ENDIAN (1<<12) +#define SDL_AUDIO_MASK_SIGNED (1<<15) +#define SDL_AUDIO_BITSIZE(x) (x & SDL_AUDIO_MASK_BITSIZE) +#define SDL_AUDIO_ISFLOAT(x) (x & SDL_AUDIO_MASK_DATATYPE) +#define SDL_AUDIO_ISBIGENDIAN(x) (x & SDL_AUDIO_MASK_ENDIAN) +#define SDL_AUDIO_ISSIGNED(x) (x & SDL_AUDIO_MASK_SIGNED) +#define SDL_AUDIO_ISINT(x) (!SDL_AUDIO_ISFLOAT(x)) +#define SDL_AUDIO_ISLITTLEENDIAN(x) (!SDL_AUDIO_ISBIGENDIAN(x)) +#define SDL_AUDIO_ISUNSIGNED(x) (!SDL_AUDIO_ISSIGNED(x)) + +/** + * \name Audio format flags + * + * Defaults to LSB byte order. + */ +/* @{ */ +#define AUDIO_U8 0x0008 /**< Unsigned 8-bit samples */ +#define AUDIO_S8 0x8008 /**< Signed 8-bit samples */ +#define AUDIO_U16LSB 0x0010 /**< Unsigned 16-bit samples */ +#define AUDIO_S16LSB 0x8010 /**< Signed 16-bit samples */ +#define AUDIO_U16MSB 0x1010 /**< As above, but big-endian byte order */ +#define AUDIO_S16MSB 0x9010 /**< As above, but big-endian byte order */ +#define AUDIO_U16 AUDIO_U16LSB +#define AUDIO_S16 AUDIO_S16LSB +/* @} */ + +/** + * \name int32 support + */ +/* @{ */ +#define AUDIO_S32LSB 0x8020 /**< 32-bit integer samples */ +#define AUDIO_S32MSB 0x9020 /**< As above, but big-endian byte order */ +#define AUDIO_S32 AUDIO_S32LSB +/* @} */ + +/** + * \name float32 support + */ +/* @{ */ +#define AUDIO_F32LSB 0x8120 /**< 32-bit floating point samples */ +#define AUDIO_F32MSB 0x9120 /**< As above, but big-endian byte order */ +#define AUDIO_F32 AUDIO_F32LSB +/* @} */ + +/** + * \name Native audio byte ordering + */ +/* @{ */ +#if SDL_BYTEORDER == SDL_LIL_ENDIAN +#define AUDIO_U16SYS AUDIO_U16LSB +#define AUDIO_S16SYS AUDIO_S16LSB +#define AUDIO_S32SYS AUDIO_S32LSB +#define AUDIO_F32SYS AUDIO_F32LSB +#else +#define AUDIO_U16SYS AUDIO_U16MSB +#define AUDIO_S16SYS AUDIO_S16MSB +#define AUDIO_S32SYS AUDIO_S32MSB +#define AUDIO_F32SYS AUDIO_F32MSB +#endif +/* @} */ + +/** + * \name Allow change flags + * + * Which audio format changes are allowed when opening a device. + */ +/* @{ */ +#define SDL_AUDIO_ALLOW_FREQUENCY_CHANGE 0x00000001 +#define SDL_AUDIO_ALLOW_FORMAT_CHANGE 0x00000002 +#define SDL_AUDIO_ALLOW_CHANNELS_CHANGE 0x00000004 +#define SDL_AUDIO_ALLOW_SAMPLES_CHANGE 0x00000008 +#define SDL_AUDIO_ALLOW_ANY_CHANGE (SDL_AUDIO_ALLOW_FREQUENCY_CHANGE|SDL_AUDIO_ALLOW_FORMAT_CHANGE|SDL_AUDIO_ALLOW_CHANNELS_CHANGE|SDL_AUDIO_ALLOW_SAMPLES_CHANGE) +/* @} */ + +/* @} *//* Audio flags */ + +/** + * This function is called when the audio device needs more data. + * + * \param userdata An application-specific parameter saved in + * the SDL_AudioSpec structure + * \param stream A pointer to the audio data buffer. + * \param len The length of that buffer in bytes. + * + * Once the callback returns, the buffer will no longer be valid. + * Stereo samples are stored in a LRLRLR ordering. + * + * You can choose to avoid callbacks and use SDL_QueueAudio() instead, if + * you like. Just open your audio device with a NULL callback. + */ +typedef void (SDLCALL * SDL_AudioCallback) (void *userdata, Uint8 * stream, + int len); + +/** + * The calculated values in this structure are calculated by SDL_OpenAudio(). + * + * For multi-channel audio, the default SDL channel mapping is: + * 2: FL FR (stereo) + * 3: FL FR LFE (2.1 surround) + * 4: FL FR BL BR (quad) + * 5: FL FR LFE BL BR (4.1 surround) + * 6: FL FR FC LFE SL SR (5.1 surround - last two can also be BL BR) + * 7: FL FR FC LFE BC SL SR (6.1 surround) + * 8: FL FR FC LFE BL BR SL SR (7.1 surround) + */ +typedef struct SDL_AudioSpec +{ + int freq; /**< DSP frequency -- samples per second */ + SDL_AudioFormat format; /**< Audio data format */ + Uint8 channels; /**< Number of channels: 1 mono, 2 stereo */ + Uint8 silence; /**< Audio buffer silence value (calculated) */ + Uint16 samples; /**< Audio buffer size in sample FRAMES (total samples divided by channel count) */ + Uint16 padding; /**< Necessary for some compile environments */ + Uint32 size; /**< Audio buffer size in bytes (calculated) */ + SDL_AudioCallback callback; /**< Callback that feeds the audio device (NULL to use SDL_QueueAudio()). */ + void *userdata; /**< Userdata passed to callback (ignored for NULL callbacks). */ +} SDL_AudioSpec; + + +struct SDL_AudioCVT; +typedef void (SDLCALL * SDL_AudioFilter) (struct SDL_AudioCVT * cvt, + SDL_AudioFormat format); + +/** + * \brief Upper limit of filters in SDL_AudioCVT + * + * The maximum number of SDL_AudioFilter functions in SDL_AudioCVT is + * currently limited to 9. The SDL_AudioCVT.filters array has 10 pointers, + * one of which is the terminating NULL pointer. + */ +#define SDL_AUDIOCVT_MAX_FILTERS 9 + +/** + * \struct SDL_AudioCVT + * \brief A structure to hold a set of audio conversion filters and buffers. + * + * Note that various parts of the conversion pipeline can take advantage + * of SIMD operations (like SSE2, for example). SDL_AudioCVT doesn't require + * you to pass it aligned data, but can possibly run much faster if you + * set both its (buf) field to a pointer that is aligned to 16 bytes, and its + * (len) field to something that's a multiple of 16, if possible. + */ +#if defined(__GNUC__) && !defined(__CHERI_PURE_CAPABILITY__) +/* This structure is 84 bytes on 32-bit architectures, make sure GCC doesn't + pad it out to 88 bytes to guarantee ABI compatibility between compilers. + This is not a concern on CHERI architectures, where pointers must be stored + at aligned locations otherwise they will become invalid, and thus structs + containing pointers cannot be packed without giving a warning or error. + vvv + The next time we rev the ABI, make sure to size the ints and add padding. +*/ +#define SDL_AUDIOCVT_PACKED __attribute__((packed)) +#else +#define SDL_AUDIOCVT_PACKED +#endif +/* */ +typedef struct SDL_AudioCVT +{ + int needed; /**< Set to 1 if conversion possible */ + SDL_AudioFormat src_format; /**< Source audio format */ + SDL_AudioFormat dst_format; /**< Target audio format */ + double rate_incr; /**< Rate conversion increment */ + Uint8 *buf; /**< Buffer to hold entire audio data */ + int len; /**< Length of original audio buffer */ + int len_cvt; /**< Length of converted audio buffer */ + int len_mult; /**< buffer must be len*len_mult big */ + double len_ratio; /**< Given len, final size is len*len_ratio */ + SDL_AudioFilter filters[SDL_AUDIOCVT_MAX_FILTERS + 1]; /**< NULL-terminated list of filter functions */ + int filter_index; /**< Current audio conversion function */ +} SDL_AUDIOCVT_PACKED SDL_AudioCVT; + + +/* Function prototypes */ + +/** + * \name Driver discovery functions + * + * These functions return the list of built in audio drivers, in the + * order that they are normally initialized by default. + */ +/* @{ */ + +/** + * Use this function to get the number of built-in audio drivers. + * + * This function returns a hardcoded number. This never returns a negative + * value; if there are no drivers compiled into this build of SDL, this + * function returns zero. The presence of a driver in this list does not mean + * it will function, it just means SDL is capable of interacting with that + * interface. For example, a build of SDL might have esound support, but if + * there's no esound server available, SDL's esound driver would fail if used. + * + * By default, SDL tries all drivers, in its preferred order, until one is + * found to be usable. + * + * \returns the number of built-in audio drivers. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetAudioDriver + */ +extern DECLSPEC int SDLCALL SDL_GetNumAudioDrivers(void); + +/** + * Use this function to get the name of a built in audio driver. + * + * The list of audio drivers is given in the order that they are normally + * initialized by default; the drivers that seem more reasonable to choose + * first (as far as the SDL developers believe) are earlier in the list. + * + * The names of drivers are all simple, low-ASCII identifiers, like "alsa", + * "coreaudio" or "xaudio2". These never have Unicode characters, and are not + * meant to be proper names. + * + * \param index the index of the audio driver; the value ranges from 0 to + * SDL_GetNumAudioDrivers() - 1 + * \returns the name of the audio driver at the requested index, or NULL if an + * invalid index was specified. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetNumAudioDrivers + */ +extern DECLSPEC const char *SDLCALL SDL_GetAudioDriver(int index); +/* @} */ + +/** + * \name Initialization and cleanup + * + * \internal These functions are used internally, and should not be used unless + * you have a specific need to specify the audio driver you want to + * use. You should normally use SDL_Init() or SDL_InitSubSystem(). + */ +/* @{ */ + +/** + * Use this function to initialize a particular audio driver. + * + * This function is used internally, and should not be used unless you have a + * specific need to designate the audio driver you want to use. You should + * normally use SDL_Init() or SDL_InitSubSystem(). + * + * \param driver_name the name of the desired audio driver + * \returns 0 on success or a negative error code on failure; call + * SDL_GetError() for more information. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_AudioQuit + */ +extern DECLSPEC int SDLCALL SDL_AudioInit(const char *driver_name); + +/** + * Use this function to shut down audio if you initialized it with + * SDL_AudioInit(). + * + * This function is used internally, and should not be used unless you have a + * specific need to specify the audio driver you want to use. You should + * normally use SDL_Quit() or SDL_QuitSubSystem(). + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_AudioInit + */ +extern DECLSPEC void SDLCALL SDL_AudioQuit(void); +/* @} */ + +/** + * Get the name of the current audio driver. + * + * The returned string points to internal static memory and thus never becomes + * invalid, even if you quit the audio subsystem and initialize a new driver + * (although such a case would return a different static string from another + * call to this function, of course). As such, you should not modify or free + * the returned string. + * + * \returns the name of the current audio driver or NULL if no driver has been + * initialized. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_AudioInit + */ +extern DECLSPEC const char *SDLCALL SDL_GetCurrentAudioDriver(void); + +/** + * This function is a legacy means of opening the audio device. + * + * This function remains for compatibility with SDL 1.2, but also because it's + * slightly easier to use than the new functions in SDL 2.0. The new, more + * powerful, and preferred way to do this is SDL_OpenAudioDevice(). + * + * This function is roughly equivalent to: + * + * ```c + * SDL_OpenAudioDevice(NULL, 0, desired, obtained, SDL_AUDIO_ALLOW_ANY_CHANGE); + * ``` + * + * With two notable exceptions: + * + * - If `obtained` is NULL, we use `desired` (and allow no changes), which + * means desired will be modified to have the correct values for silence, + * etc, and SDL will convert any differences between your app's specific + * request and the hardware behind the scenes. + * - The return value is always success or failure, and not a device ID, which + * means you can only have one device open at a time with this function. + * + * \param desired an SDL_AudioSpec structure representing the desired output + * format. Please refer to the SDL_OpenAudioDevice + * documentation for details on how to prepare this structure. + * \param obtained an SDL_AudioSpec structure filled in with the actual + * parameters, or NULL. + * \returns 0 if successful, placing the actual hardware parameters in the + * structure pointed to by `obtained`. + * + * If `obtained` is NULL, the audio data passed to the callback + * function will be guaranteed to be in the requested format, and + * will be automatically converted to the actual hardware audio + * format if necessary. If `obtained` is NULL, `desired` will have + * fields modified. + * + * This function returns a negative error code on failure to open the + * audio device or failure to set up the audio thread; call + * SDL_GetError() for more information. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_CloseAudio + * \sa SDL_LockAudio + * \sa SDL_PauseAudio + * \sa SDL_UnlockAudio + */ +extern DECLSPEC int SDLCALL SDL_OpenAudio(SDL_AudioSpec * desired, + SDL_AudioSpec * obtained); + +/** + * SDL Audio Device IDs. + * + * A successful call to SDL_OpenAudio() is always device id 1, and legacy + * SDL audio APIs assume you want this device ID. SDL_OpenAudioDevice() calls + * always returns devices >= 2 on success. The legacy calls are good both + * for backwards compatibility and when you don't care about multiple, + * specific, or capture devices. + */ +typedef Uint32 SDL_AudioDeviceID; + +/** + * Get the number of built-in audio devices. + * + * This function is only valid after successfully initializing the audio + * subsystem. + * + * Note that audio capture support is not implemented as of SDL 2.0.4, so the + * `iscapture` parameter is for future expansion and should always be zero for + * now. + * + * This function will return -1 if an explicit list of devices can't be + * determined. Returning -1 is not an error. For example, if SDL is set up to + * talk to a remote audio server, it can't list every one available on the + * Internet, but it will still allow a specific host to be specified in + * SDL_OpenAudioDevice(). + * + * In many common cases, when this function returns a value <= 0, it can still + * successfully open the default device (NULL for first argument of + * SDL_OpenAudioDevice()). + * + * This function may trigger a complete redetect of available hardware. It + * should not be called for each iteration of a loop, but rather once at the + * start of a loop: + * + * ```c + * // Don't do this: + * for (int i = 0; i < SDL_GetNumAudioDevices(0); i++) + * + * // do this instead: + * const int count = SDL_GetNumAudioDevices(0); + * for (int i = 0; i < count; ++i) { do_something_here(); } + * ``` + * + * \param iscapture zero to request playback devices, non-zero to request + * recording devices + * \returns the number of available devices exposed by the current driver or + * -1 if an explicit list of devices can't be determined. A return + * value of -1 does not necessarily mean an error condition. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetAudioDeviceName + * \sa SDL_OpenAudioDevice + */ +extern DECLSPEC int SDLCALL SDL_GetNumAudioDevices(int iscapture); + +/** + * Get the human-readable name of a specific audio device. + * + * This function is only valid after successfully initializing the audio + * subsystem. The values returned by this function reflect the latest call to + * SDL_GetNumAudioDevices(); re-call that function to redetect available + * hardware. + * + * The string returned by this function is UTF-8 encoded, read-only, and + * managed internally. You are not to free it. If you need to keep the string + * for any length of time, you should make your own copy of it, as it will be + * invalid next time any of several other SDL functions are called. + * + * \param index the index of the audio device; valid values range from 0 to + * SDL_GetNumAudioDevices() - 1 + * \param iscapture non-zero to query the list of recording devices, zero to + * query the list of output devices. + * \returns the name of the audio device at the requested index, or NULL on + * error. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetNumAudioDevices + * \sa SDL_GetDefaultAudioInfo + */ +extern DECLSPEC const char *SDLCALL SDL_GetAudioDeviceName(int index, + int iscapture); + +/** + * Get the preferred audio format of a specific audio device. + * + * This function is only valid after a successfully initializing the audio + * subsystem. The values returned by this function reflect the latest call to + * SDL_GetNumAudioDevices(); re-call that function to redetect available + * hardware. + * + * `spec` will be filled with the sample rate, sample format, and channel + * count. + * + * \param index the index of the audio device; valid values range from 0 to + * SDL_GetNumAudioDevices() - 1 + * \param iscapture non-zero to query the list of recording devices, zero to + * query the list of output devices. + * \param spec The SDL_AudioSpec to be initialized by this function. + * \returns 0 on success, nonzero on error + * + * \since This function is available since SDL 2.0.16. + * + * \sa SDL_GetNumAudioDevices + * \sa SDL_GetDefaultAudioInfo + */ +extern DECLSPEC int SDLCALL SDL_GetAudioDeviceSpec(int index, + int iscapture, + SDL_AudioSpec *spec); + + +/** + * Get the name and preferred format of the default audio device. + * + * Some (but not all!) platforms have an isolated mechanism to get information + * about the "default" device. This can actually be a completely different + * device that's not in the list you get from SDL_GetAudioDeviceSpec(). It can + * even be a network address! (This is discussed in SDL_OpenAudioDevice().) + * + * As a result, this call is not guaranteed to be performant, as it can query + * the sound server directly every time, unlike the other query functions. You + * should call this function sparingly! + * + * `spec` will be filled with the sample rate, sample format, and channel + * count, if a default device exists on the system. If `name` is provided, + * will be filled with either a dynamically-allocated UTF-8 string or NULL. + * + * \param name A pointer to be filled with the name of the default device (can + * be NULL). Please call SDL_free() when you are done with this + * pointer! + * \param spec The SDL_AudioSpec to be initialized by this function. + * \param iscapture non-zero to query the default recording device, zero to + * query the default output device. + * \returns 0 on success, nonzero on error + * + * \since This function is available since SDL 2.24.0. + * + * \sa SDL_GetAudioDeviceName + * \sa SDL_GetAudioDeviceSpec + * \sa SDL_OpenAudioDevice + */ +extern DECLSPEC int SDLCALL SDL_GetDefaultAudioInfo(char **name, + SDL_AudioSpec *spec, + int iscapture); + + +/** + * Open a specific audio device. + * + * SDL_OpenAudio(), unlike this function, always acts on device ID 1. As such, + * this function will never return a 1 so as not to conflict with the legacy + * function. + * + * Please note that SDL 2.0 before 2.0.5 did not support recording; as such, + * this function would fail if `iscapture` was not zero. Starting with SDL + * 2.0.5, recording is implemented and this value can be non-zero. + * + * Passing in a `device` name of NULL requests the most reasonable default + * (and is equivalent to what SDL_OpenAudio() does to choose a device). The + * `device` name is a UTF-8 string reported by SDL_GetAudioDeviceName(), but + * some drivers allow arbitrary and driver-specific strings, such as a + * hostname/IP address for a remote audio server, or a filename in the + * diskaudio driver. + * + * An opened audio device starts out paused, and should be enabled for playing + * by calling SDL_PauseAudioDevice(devid, 0) when you are ready for your audio + * callback function to be called. Since the audio driver may modify the + * requested size of the audio buffer, you should allocate any local mixing + * buffers after you open the audio device. + * + * The audio callback runs in a separate thread in most cases; you can prevent + * race conditions between your callback and other threads without fully + * pausing playback with SDL_LockAudioDevice(). For more information about the + * callback, see SDL_AudioSpec. + * + * Managing the audio spec via 'desired' and 'obtained': + * + * When filling in the desired audio spec structure: + * + * - `desired->freq` should be the frequency in sample-frames-per-second (Hz). + * - `desired->format` should be the audio format (`AUDIO_S16SYS`, etc). + * - `desired->samples` is the desired size of the audio buffer, in _sample + * frames_ (with stereo output, two samples--left and right--would make a + * single sample frame). This number should be a power of two, and may be + * adjusted by the audio driver to a value more suitable for the hardware. + * Good values seem to range between 512 and 8096 inclusive, depending on + * the application and CPU speed. Smaller values reduce latency, but can + * lead to underflow if the application is doing heavy processing and cannot + * fill the audio buffer in time. Note that the number of sample frames is + * directly related to time by the following formula: `ms = + * (sampleframes*1000)/freq` + * - `desired->size` is the size in _bytes_ of the audio buffer, and is + * calculated by SDL_OpenAudioDevice(). You don't initialize this. + * - `desired->silence` is the value used to set the buffer to silence, and is + * calculated by SDL_OpenAudioDevice(). You don't initialize this. + * - `desired->callback` should be set to a function that will be called when + * the audio device is ready for more data. It is passed a pointer to the + * audio buffer, and the length in bytes of the audio buffer. This function + * usually runs in a separate thread, and so you should protect data + * structures that it accesses by calling SDL_LockAudioDevice() and + * SDL_UnlockAudioDevice() in your code. Alternately, you may pass a NULL + * pointer here, and call SDL_QueueAudio() with some frequency, to queue + * more audio samples to be played (or for capture devices, call + * SDL_DequeueAudio() with some frequency, to obtain audio samples). + * - `desired->userdata` is passed as the first parameter to your callback + * function. If you passed a NULL callback, this value is ignored. + * + * `allowed_changes` can have the following flags OR'd together: + * + * - `SDL_AUDIO_ALLOW_FREQUENCY_CHANGE` + * - `SDL_AUDIO_ALLOW_FORMAT_CHANGE` + * - `SDL_AUDIO_ALLOW_CHANNELS_CHANGE` + * - `SDL_AUDIO_ALLOW_SAMPLES_CHANGE` + * - `SDL_AUDIO_ALLOW_ANY_CHANGE` + * + * These flags specify how SDL should behave when a device cannot offer a + * specific feature. If the application requests a feature that the hardware + * doesn't offer, SDL will always try to get the closest equivalent. + * + * For example, if you ask for float32 audio format, but the sound card only + * supports int16, SDL will set the hardware to int16. If you had set + * SDL_AUDIO_ALLOW_FORMAT_CHANGE, SDL will change the format in the `obtained` + * structure. If that flag was *not* set, SDL will prepare to convert your + * callback's float32 audio to int16 before feeding it to the hardware and + * will keep the originally requested format in the `obtained` structure. + * + * The resulting audio specs, varying depending on hardware and on what + * changes were allowed, will then be written back to `obtained`. + * + * If your application can only handle one specific data format, pass a zero + * for `allowed_changes` and let SDL transparently handle any differences. + * + * \param device a UTF-8 string reported by SDL_GetAudioDeviceName() or a + * driver-specific name as appropriate. NULL requests the most + * reasonable default device. + * \param iscapture non-zero to specify a device should be opened for + * recording, not playback + * \param desired an SDL_AudioSpec structure representing the desired output + * format; see SDL_OpenAudio() for more information + * \param obtained an SDL_AudioSpec structure filled in with the actual output + * format; see SDL_OpenAudio() for more information + * \param allowed_changes 0, or one or more flags OR'd together + * \returns a valid device ID that is > 0 on success or 0 on failure; call + * SDL_GetError() for more information. + * + * For compatibility with SDL 1.2, this will never return 1, since + * SDL reserves that ID for the legacy SDL_OpenAudio() function. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_CloseAudioDevice + * \sa SDL_GetAudioDeviceName + * \sa SDL_LockAudioDevice + * \sa SDL_OpenAudio + * \sa SDL_PauseAudioDevice + * \sa SDL_UnlockAudioDevice + */ +extern DECLSPEC SDL_AudioDeviceID SDLCALL SDL_OpenAudioDevice( + const char *device, + int iscapture, + const SDL_AudioSpec *desired, + SDL_AudioSpec *obtained, + int allowed_changes); + + + +/** + * \name Audio state + * + * Get the current audio state. + */ +/* @{ */ +typedef enum +{ + SDL_AUDIO_STOPPED = 0, + SDL_AUDIO_PLAYING, + SDL_AUDIO_PAUSED +} SDL_AudioStatus; + +/** + * This function is a legacy means of querying the audio device. + * + * New programs might want to use SDL_GetAudioDeviceStatus() instead. This + * function is equivalent to calling... + * + * ```c + * SDL_GetAudioDeviceStatus(1); + * ``` + * + * ...and is only useful if you used the legacy SDL_OpenAudio() function. + * + * \returns the SDL_AudioStatus of the audio device opened by SDL_OpenAudio(). + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetAudioDeviceStatus + */ +extern DECLSPEC SDL_AudioStatus SDLCALL SDL_GetAudioStatus(void); + +/** + * Use this function to get the current audio state of an audio device. + * + * \param dev the ID of an audio device previously opened with + * SDL_OpenAudioDevice() + * \returns the SDL_AudioStatus of the specified audio device. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_PauseAudioDevice + */ +extern DECLSPEC SDL_AudioStatus SDLCALL SDL_GetAudioDeviceStatus(SDL_AudioDeviceID dev); +/* @} *//* Audio State */ + +/** + * \name Pause audio functions + * + * These functions pause and unpause the audio callback processing. + * They should be called with a parameter of 0 after opening the audio + * device to start playing sound. This is so you can safely initialize + * data for your callback function after opening the audio device. + * Silence will be written to the audio device during the pause. + */ +/* @{ */ + +/** + * This function is a legacy means of pausing the audio device. + * + * New programs might want to use SDL_PauseAudioDevice() instead. This + * function is equivalent to calling... + * + * ```c + * SDL_PauseAudioDevice(1, pause_on); + * ``` + * + * ...and is only useful if you used the legacy SDL_OpenAudio() function. + * + * \param pause_on non-zero to pause, 0 to unpause + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetAudioStatus + * \sa SDL_PauseAudioDevice + */ +extern DECLSPEC void SDLCALL SDL_PauseAudio(int pause_on); + +/** + * Use this function to pause and unpause audio playback on a specified + * device. + * + * This function pauses and unpauses the audio callback processing for a given + * device. Newly-opened audio devices start in the paused state, so you must + * call this function with **pause_on**=0 after opening the specified audio + * device to start playing sound. This allows you to safely initialize data + * for your callback function after opening the audio device. Silence will be + * written to the audio device while paused, and the audio callback is + * guaranteed to not be called. Pausing one device does not prevent other + * unpaused devices from running their callbacks. + * + * Pausing state does not stack; even if you pause a device several times, a + * single unpause will start the device playing again, and vice versa. This is + * different from how SDL_LockAudioDevice() works. + * + * If you just need to protect a few variables from race conditions vs your + * callback, you shouldn't pause the audio device, as it will lead to dropouts + * in the audio playback. Instead, you should use SDL_LockAudioDevice(). + * + * \param dev a device opened by SDL_OpenAudioDevice() + * \param pause_on non-zero to pause, 0 to unpause + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_LockAudioDevice + */ +extern DECLSPEC void SDLCALL SDL_PauseAudioDevice(SDL_AudioDeviceID dev, + int pause_on); +/* @} *//* Pause audio functions */ + +/** + * Load the audio data of a WAVE file into memory. + * + * Loading a WAVE file requires `src`, `spec`, `audio_buf` and `audio_len` to + * be valid pointers. The entire data portion of the file is then loaded into + * memory and decoded if necessary. + * + * If `freesrc` is non-zero, the data source gets automatically closed and + * freed before the function returns. + * + * Supported formats are RIFF WAVE files with the formats PCM (8, 16, 24, and + * 32 bits), IEEE Float (32 bits), Microsoft ADPCM and IMA ADPCM (4 bits), and + * A-law and mu-law (8 bits). Other formats are currently unsupported and + * cause an error. + * + * If this function succeeds, the pointer returned by it is equal to `spec` + * and the pointer to the audio data allocated by the function is written to + * `audio_buf` and its length in bytes to `audio_len`. The SDL_AudioSpec + * members `freq`, `channels`, and `format` are set to the values of the audio + * data in the buffer. The `samples` member is set to a sane default and all + * others are set to zero. + * + * It's necessary to use SDL_FreeWAV() to free the audio data returned in + * `audio_buf` when it is no longer used. + * + * Because of the underspecification of the .WAV format, there are many + * problematic files in the wild that cause issues with strict decoders. To + * provide compatibility with these files, this decoder is lenient in regards + * to the truncation of the file, the fact chunk, and the size of the RIFF + * chunk. The hints `SDL_HINT_WAVE_RIFF_CHUNK_SIZE`, + * `SDL_HINT_WAVE_TRUNCATION`, and `SDL_HINT_WAVE_FACT_CHUNK` can be used to + * tune the behavior of the loading process. + * + * Any file that is invalid (due to truncation, corruption, or wrong values in + * the headers), too big, or unsupported causes an error. Additionally, any + * critical I/O error from the data source will terminate the loading process + * with an error. The function returns NULL on error and in all cases (with + * the exception of `src` being NULL), an appropriate error message will be + * set. + * + * It is required that the data source supports seeking. + * + * Example: + * + * ```c + * SDL_LoadWAV_RW(SDL_RWFromFile("sample.wav", "rb"), 1, &spec, &buf, &len); + * ``` + * + * Note that the SDL_LoadWAV macro does this same thing for you, but in a less + * messy way: + * + * ```c + * SDL_LoadWAV("sample.wav", &spec, &buf, &len); + * ``` + * + * \param src The data source for the WAVE data + * \param freesrc If non-zero, SDL will _always_ free the data source + * \param spec An SDL_AudioSpec that will be filled in with the wave file's + * format details + * \param audio_buf A pointer filled with the audio data, allocated by the + * function. + * \param audio_len A pointer filled with the length of the audio data buffer + * in bytes + * \returns This function, if successfully called, returns `spec`, which will + * be filled with the audio data format of the wave source data. + * `audio_buf` will be filled with a pointer to an allocated buffer + * containing the audio data, and `audio_len` is filled with the + * length of that audio buffer in bytes. + * + * This function returns NULL if the .WAV file cannot be opened, uses + * an unknown data format, or is corrupt; call SDL_GetError() for + * more information. + * + * When the application is done with the data returned in + * `audio_buf`, it should call SDL_FreeWAV() to dispose of it. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_FreeWAV + * \sa SDL_LoadWAV + */ +extern DECLSPEC SDL_AudioSpec *SDLCALL SDL_LoadWAV_RW(SDL_RWops * src, + int freesrc, + SDL_AudioSpec * spec, + Uint8 ** audio_buf, + Uint32 * audio_len); + +/** + * Loads a WAV from a file. + * Compatibility convenience function. + */ +#define SDL_LoadWAV(file, spec, audio_buf, audio_len) \ + SDL_LoadWAV_RW(SDL_RWFromFile(file, "rb"),1, spec,audio_buf,audio_len) + +/** + * Free data previously allocated with SDL_LoadWAV() or SDL_LoadWAV_RW(). + * + * After a WAVE file has been opened with SDL_LoadWAV() or SDL_LoadWAV_RW() + * its data can eventually be freed with SDL_FreeWAV(). It is safe to call + * this function with a NULL pointer. + * + * \param audio_buf a pointer to the buffer created by SDL_LoadWAV() or + * SDL_LoadWAV_RW() + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_LoadWAV + * \sa SDL_LoadWAV_RW + */ +extern DECLSPEC void SDLCALL SDL_FreeWAV(Uint8 * audio_buf); + +/** + * Initialize an SDL_AudioCVT structure for conversion. + * + * Before an SDL_AudioCVT structure can be used to convert audio data it must + * be initialized with source and destination information. + * + * This function will zero out every field of the SDL_AudioCVT, so it must be + * called before the application fills in the final buffer information. + * + * Once this function has returned successfully, and reported that a + * conversion is necessary, the application fills in the rest of the fields in + * SDL_AudioCVT, now that it knows how large a buffer it needs to allocate, + * and then can call SDL_ConvertAudio() to complete the conversion. + * + * \param cvt an SDL_AudioCVT structure filled in with audio conversion + * information + * \param src_format the source format of the audio data; for more info see + * SDL_AudioFormat + * \param src_channels the number of channels in the source + * \param src_rate the frequency (sample-frames-per-second) of the source + * \param dst_format the destination format of the audio data; for more info + * see SDL_AudioFormat + * \param dst_channels the number of channels in the destination + * \param dst_rate the frequency (sample-frames-per-second) of the destination + * \returns 1 if the audio filter is prepared, 0 if no conversion is needed, + * or a negative error code on failure; call SDL_GetError() for more + * information. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_ConvertAudio + */ +extern DECLSPEC int SDLCALL SDL_BuildAudioCVT(SDL_AudioCVT * cvt, + SDL_AudioFormat src_format, + Uint8 src_channels, + int src_rate, + SDL_AudioFormat dst_format, + Uint8 dst_channels, + int dst_rate); + +/** + * Convert audio data to a desired audio format. + * + * This function does the actual audio data conversion, after the application + * has called SDL_BuildAudioCVT() to prepare the conversion information and + * then filled in the buffer details. + * + * Once the application has initialized the `cvt` structure using + * SDL_BuildAudioCVT(), allocated an audio buffer and filled it with audio + * data in the source format, this function will convert the buffer, in-place, + * to the desired format. + * + * The data conversion may go through several passes; any given pass may + * possibly temporarily increase the size of the data. For example, SDL might + * expand 16-bit data to 32 bits before resampling to a lower frequency, + * shrinking the data size after having grown it briefly. Since the supplied + * buffer will be both the source and destination, converting as necessary + * in-place, the application must allocate a buffer that will fully contain + * the data during its largest conversion pass. After SDL_BuildAudioCVT() + * returns, the application should set the `cvt->len` field to the size, in + * bytes, of the source data, and allocate a buffer that is `cvt->len * + * cvt->len_mult` bytes long for the `buf` field. + * + * The source data should be copied into this buffer before the call to + * SDL_ConvertAudio(). Upon successful return, this buffer will contain the + * converted audio, and `cvt->len_cvt` will be the size of the converted data, + * in bytes. Any bytes in the buffer past `cvt->len_cvt` are undefined once + * this function returns. + * + * \param cvt an SDL_AudioCVT structure that was previously set up by + * SDL_BuildAudioCVT(). + * \returns 0 if the conversion was completed successfully or a negative error + * code on failure; call SDL_GetError() for more information. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_BuildAudioCVT + */ +extern DECLSPEC int SDLCALL SDL_ConvertAudio(SDL_AudioCVT * cvt); + +/* SDL_AudioStream is a new audio conversion interface. + The benefits vs SDL_AudioCVT: + - it can handle resampling data in chunks without generating + artifacts, when it doesn't have the complete buffer available. + - it can handle incoming data in any variable size. + - You push data as you have it, and pull it when you need it + */ +/* this is opaque to the outside world. */ +struct _SDL_AudioStream; +typedef struct _SDL_AudioStream SDL_AudioStream; + +/** + * Create a new audio stream. + * + * \param src_format The format of the source audio + * \param src_channels The number of channels of the source audio + * \param src_rate The sampling rate of the source audio + * \param dst_format The format of the desired audio output + * \param dst_channels The number of channels of the desired audio output + * \param dst_rate The sampling rate of the desired audio output + * \returns 0 on success, or -1 on error. + * + * \since This function is available since SDL 2.0.7. + * + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC SDL_AudioStream * SDLCALL SDL_NewAudioStream(const SDL_AudioFormat src_format, + const Uint8 src_channels, + const int src_rate, + const SDL_AudioFormat dst_format, + const Uint8 dst_channels, + const int dst_rate); + +/** + * Add data to be converted/resampled to the stream. + * + * \param stream The stream the audio data is being added to + * \param buf A pointer to the audio data to add + * \param len The number of bytes to write to the stream + * \returns 0 on success, or -1 on error. + * + * \since This function is available since SDL 2.0.7. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC int SDLCALL SDL_AudioStreamPut(SDL_AudioStream *stream, const void *buf, int len); + +/** + * Get converted/resampled data from the stream + * + * \param stream The stream the audio is being requested from + * \param buf A buffer to fill with audio data + * \param len The maximum number of bytes to fill + * \returns the number of bytes read from the stream, or -1 on error + * + * \since This function is available since SDL 2.0.7. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC int SDLCALL SDL_AudioStreamGet(SDL_AudioStream *stream, void *buf, int len); + +/** + * Get the number of converted/resampled bytes available. + * + * The stream may be buffering data behind the scenes until it has enough to + * resample correctly, so this number might be lower than what you expect, or + * even be zero. Add more data or flush the stream if you need the data now. + * + * \since This function is available since SDL 2.0.7. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC int SDLCALL SDL_AudioStreamAvailable(SDL_AudioStream *stream); + +/** + * Tell the stream that you're done sending data, and anything being buffered + * should be converted/resampled and made available immediately. + * + * It is legal to add more data to a stream after flushing, but there will be + * audio gaps in the output. Generally this is intended to signal the end of + * input, so the complete output becomes available. + * + * \since This function is available since SDL 2.0.7. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamClear + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC int SDLCALL SDL_AudioStreamFlush(SDL_AudioStream *stream); + +/** + * Clear any pending data in the stream without converting it + * + * \since This function is available since SDL 2.0.7. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_FreeAudioStream + */ +extern DECLSPEC void SDLCALL SDL_AudioStreamClear(SDL_AudioStream *stream); + +/** + * Free an audio stream + * + * \since This function is available since SDL 2.0.7. + * + * \sa SDL_NewAudioStream + * \sa SDL_AudioStreamPut + * \sa SDL_AudioStreamGet + * \sa SDL_AudioStreamAvailable + * \sa SDL_AudioStreamFlush + * \sa SDL_AudioStreamClear + */ +extern DECLSPEC void SDLCALL SDL_FreeAudioStream(SDL_AudioStream *stream); + +#define SDL_MIX_MAXVOLUME 128 + +/** + * This function is a legacy means of mixing audio. + * + * This function is equivalent to calling... + * + * ```c + * SDL_MixAudioFormat(dst, src, format, len, volume); + * ``` + * + * ...where `format` is the obtained format of the audio device from the + * legacy SDL_OpenAudio() function. + * + * \param dst the destination for the mixed audio + * \param src the source audio buffer to be mixed + * \param len the length of the audio buffer in bytes + * \param volume ranges from 0 - 128, and should be set to SDL_MIX_MAXVOLUME + * for full audio volume + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_MixAudioFormat + */ +extern DECLSPEC void SDLCALL SDL_MixAudio(Uint8 * dst, const Uint8 * src, + Uint32 len, int volume); + +/** + * Mix audio data in a specified format. + * + * This takes an audio buffer `src` of `len` bytes of `format` data and mixes + * it into `dst`, performing addition, volume adjustment, and overflow + * clipping. The buffer pointed to by `dst` must also be `len` bytes of + * `format` data. + * + * This is provided for convenience -- you can mix your own audio data. + * + * Do not use this function for mixing together more than two streams of + * sample data. The output from repeated application of this function may be + * distorted by clipping, because there is no accumulator with greater range + * than the input (not to mention this being an inefficient way of doing it). + * + * It is a common misconception that this function is required to write audio + * data to an output stream in an audio callback. While you can do that, + * SDL_MixAudioFormat() is really only needed when you're mixing a single + * audio stream with a volume adjustment. + * + * \param dst the destination for the mixed audio + * \param src the source audio buffer to be mixed + * \param format the SDL_AudioFormat structure representing the desired audio + * format + * \param len the length of the audio buffer in bytes + * \param volume ranges from 0 - 128, and should be set to SDL_MIX_MAXVOLUME + * for full audio volume + * + * \since This function is available since SDL 2.0.0. + */ +extern DECLSPEC void SDLCALL SDL_MixAudioFormat(Uint8 * dst, + const Uint8 * src, + SDL_AudioFormat format, + Uint32 len, int volume); + +/** + * Queue more audio on non-callback devices. + * + * If you are looking to retrieve queued audio from a non-callback capture + * device, you want SDL_DequeueAudio() instead. SDL_QueueAudio() will return + * -1 to signify an error if you use it with capture devices. + * + * SDL offers two ways to feed audio to the device: you can either supply a + * callback that SDL triggers with some frequency to obtain more audio (pull + * method), or you can supply no callback, and then SDL will expect you to + * supply data at regular intervals (push method) with this function. + * + * There are no limits on the amount of data you can queue, short of + * exhaustion of address space. Queued data will drain to the device as + * necessary without further intervention from you. If the device needs audio + * but there is not enough queued, it will play silence to make up the + * difference. This means you will have skips in your audio playback if you + * aren't routinely queueing sufficient data. + * + * This function copies the supplied data, so you are safe to free it when the + * function returns. This function is thread-safe, but queueing to the same + * device from two threads at once does not promise which buffer will be + * queued first. + * + * You may not queue audio on a device that is using an application-supplied + * callback; doing so returns an error. You have to use the audio callback or + * queue audio with this function, but not both. + * + * You should not call SDL_LockAudio() on the device before queueing; SDL + * handles locking internally for this function. + * + * Note that SDL2 does not support planar audio. You will need to resample + * from planar audio formats into a non-planar one (see SDL_AudioFormat) + * before queuing audio. + * + * \param dev the device ID to which we will queue audio + * \param data the data to queue to the device for later playback + * \param len the number of bytes (not samples!) to which `data` points + * \returns 0 on success or a negative error code on failure; call + * SDL_GetError() for more information. + * + * \since This function is available since SDL 2.0.4. + * + * \sa SDL_ClearQueuedAudio + * \sa SDL_GetQueuedAudioSize + */ +extern DECLSPEC int SDLCALL SDL_QueueAudio(SDL_AudioDeviceID dev, const void *data, Uint32 len); + +/** + * Dequeue more audio on non-callback devices. + * + * If you are looking to queue audio for output on a non-callback playback + * device, you want SDL_QueueAudio() instead. SDL_DequeueAudio() will always + * return 0 if you use it with playback devices. + * + * SDL offers two ways to retrieve audio from a capture device: you can either + * supply a callback that SDL triggers with some frequency as the device + * records more audio data, (push method), or you can supply no callback, and + * then SDL will expect you to retrieve data at regular intervals (pull + * method) with this function. + * + * There are no limits on the amount of data you can queue, short of + * exhaustion of address space. Data from the device will keep queuing as + * necessary without further intervention from you. This means you will + * eventually run out of memory if you aren't routinely dequeueing data. + * + * Capture devices will not queue data when paused; if you are expecting to + * not need captured audio for some length of time, use SDL_PauseAudioDevice() + * to stop the capture device from queueing more data. This can be useful + * during, say, level loading times. When unpaused, capture devices will start + * queueing data from that point, having flushed any capturable data available + * while paused. + * + * This function is thread-safe, but dequeueing from the same device from two + * threads at once does not promise which thread will dequeue data first. + * + * You may not dequeue audio from a device that is using an + * application-supplied callback; doing so returns an error. You have to use + * the audio callback, or dequeue audio with this function, but not both. + * + * You should not call SDL_LockAudio() on the device before dequeueing; SDL + * handles locking internally for this function. + * + * \param dev the device ID from which we will dequeue audio + * \param data a pointer into where audio data should be copied + * \param len the number of bytes (not samples!) to which (data) points + * \returns the number of bytes dequeued, which could be less than requested; + * call SDL_GetError() for more information. + * + * \since This function is available since SDL 2.0.5. + * + * \sa SDL_ClearQueuedAudio + * \sa SDL_GetQueuedAudioSize + */ +extern DECLSPEC Uint32 SDLCALL SDL_DequeueAudio(SDL_AudioDeviceID dev, void *data, Uint32 len); + +/** + * Get the number of bytes of still-queued audio. + * + * For playback devices: this is the number of bytes that have been queued for + * playback with SDL_QueueAudio(), but have not yet been sent to the hardware. + * + * Once we've sent it to the hardware, this function can not decide the exact + * byte boundary of what has been played. It's possible that we just gave the + * hardware several kilobytes right before you called this function, but it + * hasn't played any of it yet, or maybe half of it, etc. + * + * For capture devices, this is the number of bytes that have been captured by + * the device and are waiting for you to dequeue. This number may grow at any + * time, so this only informs of the lower-bound of available data. + * + * You may not queue or dequeue audio on a device that is using an + * application-supplied callback; calling this function on such a device + * always returns 0. You have to use the audio callback or queue audio, but + * not both. + * + * You should not call SDL_LockAudio() on the device before querying; SDL + * handles locking internally for this function. + * + * \param dev the device ID of which we will query queued audio size + * \returns the number of bytes (not samples!) of queued audio. + * + * \since This function is available since SDL 2.0.4. + * + * \sa SDL_ClearQueuedAudio + * \sa SDL_QueueAudio + * \sa SDL_DequeueAudio + */ +extern DECLSPEC Uint32 SDLCALL SDL_GetQueuedAudioSize(SDL_AudioDeviceID dev); + +/** + * Drop any queued audio data waiting to be sent to the hardware. + * + * Immediately after this call, SDL_GetQueuedAudioSize() will return 0. For + * output devices, the hardware will start playing silence if more audio isn't + * queued. For capture devices, the hardware will start filling the empty + * queue with new data if the capture device isn't paused. + * + * This will not prevent playback of queued audio that's already been sent to + * the hardware, as we can not undo that, so expect there to be some fraction + * of a second of audio that might still be heard. This can be useful if you + * want to, say, drop any pending music or any unprocessed microphone input + * during a level change in your game. + * + * You may not queue or dequeue audio on a device that is using an + * application-supplied callback; calling this function on such a device + * always returns 0. You have to use the audio callback or queue audio, but + * not both. + * + * You should not call SDL_LockAudio() on the device before clearing the + * queue; SDL handles locking internally for this function. + * + * This function always succeeds and thus returns void. + * + * \param dev the device ID of which to clear the audio queue + * + * \since This function is available since SDL 2.0.4. + * + * \sa SDL_GetQueuedAudioSize + * \sa SDL_QueueAudio + * \sa SDL_DequeueAudio + */ +extern DECLSPEC void SDLCALL SDL_ClearQueuedAudio(SDL_AudioDeviceID dev); + + +/** + * \name Audio lock functions + * + * The lock manipulated by these functions protects the callback function. + * During a SDL_LockAudio()/SDL_UnlockAudio() pair, you can be guaranteed that + * the callback function is not running. Do not call these from the callback + * function or you will cause deadlock. + */ +/* @{ */ + +/** + * This function is a legacy means of locking the audio device. + * + * New programs might want to use SDL_LockAudioDevice() instead. This function + * is equivalent to calling... + * + * ```c + * SDL_LockAudioDevice(1); + * ``` + * + * ...and is only useful if you used the legacy SDL_OpenAudio() function. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_LockAudioDevice + * \sa SDL_UnlockAudio + * \sa SDL_UnlockAudioDevice + */ +extern DECLSPEC void SDLCALL SDL_LockAudio(void); + +/** + * Use this function to lock out the audio callback function for a specified + * device. + * + * The lock manipulated by these functions protects the audio callback + * function specified in SDL_OpenAudioDevice(). During a + * SDL_LockAudioDevice()/SDL_UnlockAudioDevice() pair, you can be guaranteed + * that the callback function for that device is not running, even if the + * device is not paused. While a device is locked, any other unpaused, + * unlocked devices may still run their callbacks. + * + * Calling this function from inside your audio callback is unnecessary. SDL + * obtains this lock before calling your function, and releases it when the + * function returns. + * + * You should not hold the lock longer than absolutely necessary. If you hold + * it too long, you'll experience dropouts in your audio playback. Ideally, + * your application locks the device, sets a few variables and unlocks again. + * Do not do heavy work while holding the lock for a device. + * + * It is safe to lock the audio device multiple times, as long as you unlock + * it an equivalent number of times. The callback will not run until the + * device has been unlocked completely in this way. If your application fails + * to unlock the device appropriately, your callback will never run, you might + * hear repeating bursts of audio, and SDL_CloseAudioDevice() will probably + * deadlock. + * + * Internally, the audio device lock is a mutex; if you lock from two threads + * at once, not only will you block the audio callback, you'll block the other + * thread. + * + * \param dev the ID of the device to be locked + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_UnlockAudioDevice + */ +extern DECLSPEC void SDLCALL SDL_LockAudioDevice(SDL_AudioDeviceID dev); + +/** + * This function is a legacy means of unlocking the audio device. + * + * New programs might want to use SDL_UnlockAudioDevice() instead. This + * function is equivalent to calling... + * + * ```c + * SDL_UnlockAudioDevice(1); + * ``` + * + * ...and is only useful if you used the legacy SDL_OpenAudio() function. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_LockAudio + * \sa SDL_UnlockAudioDevice + */ +extern DECLSPEC void SDLCALL SDL_UnlockAudio(void); + +/** + * Use this function to unlock the audio callback function for a specified + * device. + * + * This function should be paired with a previous SDL_LockAudioDevice() call. + * + * \param dev the ID of the device to be unlocked + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_LockAudioDevice + */ +extern DECLSPEC void SDLCALL SDL_UnlockAudioDevice(SDL_AudioDeviceID dev); +/* @} *//* Audio lock functions */ + +/** + * This function is a legacy means of closing the audio device. + * + * This function is equivalent to calling... + * + * ```c + * SDL_CloseAudioDevice(1); + * ``` + * + * ...and is only useful if you used the legacy SDL_OpenAudio() function. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_OpenAudio + */ +extern DECLSPEC void SDLCALL SDL_CloseAudio(void); + +/** + * Use this function to shut down audio processing and close the audio device. + * + * The application should close open audio devices once they are no longer + * needed. Calling this function will wait until the device's audio callback + * is not running, release the audio hardware and then clean up internal + * state. No further audio will play from this device once this function + * returns. + * + * This function may block briefly while pending audio data is played by the + * hardware, so that applications don't drop the last buffer of data they + * supplied. + * + * The device ID is invalid as soon as the device is closed, and is eligible + * for reuse in a new SDL_OpenAudioDevice() call immediately. + * + * \param dev an audio device previously opened with SDL_OpenAudioDevice() + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_OpenAudioDevice + */ +extern DECLSPEC void SDLCALL SDL_CloseAudioDevice(SDL_AudioDeviceID dev); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_audio_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_bits.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_bits.h new file mode 100644 index 0000000..22cb853 --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_bits.h @@ -0,0 +1,126 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_bits.h + * + * Functions for fiddling with bits and bitmasks. + */ + +#ifndef SDL_bits_h_ +#define SDL_bits_h_ + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \file SDL_bits.h + */ + +/** + * Get the index of the most significant bit. Result is undefined when called + * with 0. This operation can also be stated as "count leading zeroes" and + * "log base 2". + * + * \return the index of the most significant bit, or -1 if the value is 0. + */ +#if defined(__WATCOMC__) && defined(__386__) +extern __inline int _SDL_bsr_watcom(Uint32); +#pragma aux _SDL_bsr_watcom = \ + "bsr eax, eax" \ + parm [eax] nomemory \ + value [eax] \ + modify exact [eax] nomemory; +#endif + +SDL_FORCE_INLINE int +SDL_MostSignificantBitIndex32(Uint32 x) +{ +#if defined(__GNUC__) && (__GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) + /* Count Leading Zeroes builtin in GCC. + * http://gcc.gnu.org/onlinedocs/gcc-4.3.4/gcc/Other-Builtins.html + */ + if (x == 0) { + return -1; + } + return 31 - __builtin_clz(x); +#elif defined(__WATCOMC__) && defined(__386__) + if (x == 0) { + return -1; + } + return _SDL_bsr_watcom(x); +#elif defined(_MSC_VER) + unsigned long index; + if (_BitScanReverse(&index, x)) { + return index; + } + return -1; +#else + /* Based off of Bit Twiddling Hacks by Sean Eron Anderson + * <[email protected]>, released in the public domain. + * http://graphics.stanford.edu/~seander/bithacks.html#IntegerLog + */ + const Uint32 b[] = {0x2, 0xC, 0xF0, 0xFF00, 0xFFFF0000}; + const int S[] = {1, 2, 4, 8, 16}; + + int msbIndex = 0; + int i; + + if (x == 0) { + return -1; + } + + for (i = 4; i >= 0; i--) + { + if (x & b[i]) + { + x >>= S[i]; + msbIndex |= S[i]; + } + } + + return msbIndex; +#endif +} + +SDL_FORCE_INLINE SDL_bool +SDL_HasExactlyOneBitSet32(Uint32 x) +{ + if (x && !(x & (x - 1))) { + return SDL_TRUE; + } + return SDL_FALSE; +} + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_bits_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_blendmode.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_blendmode.h new file mode 100644 index 0000000..08c9f9d --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_blendmode.h @@ -0,0 +1,198 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_blendmode.h + * + * Header file declaring the SDL_BlendMode enumeration + */ + +#ifndef SDL_blendmode_h_ +#define SDL_blendmode_h_ + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief The blend mode used in SDL_RenderCopy() and drawing operations. + */ +typedef enum +{ + SDL_BLENDMODE_NONE = 0x00000000, /**< no blending + dstRGBA = srcRGBA */ + SDL_BLENDMODE_BLEND = 0x00000001, /**< alpha blending + dstRGB = (srcRGB * srcA) + (dstRGB * (1-srcA)) + dstA = srcA + (dstA * (1-srcA)) */ + SDL_BLENDMODE_ADD = 0x00000002, /**< additive blending + dstRGB = (srcRGB * srcA) + dstRGB + dstA = dstA */ + SDL_BLENDMODE_MOD = 0x00000004, /**< color modulate + dstRGB = srcRGB * dstRGB + dstA = dstA */ + SDL_BLENDMODE_MUL = 0x00000008, /**< color multiply + dstRGB = (srcRGB * dstRGB) + (dstRGB * (1-srcA)) + dstA = (srcA * dstA) + (dstA * (1-srcA)) */ + SDL_BLENDMODE_INVALID = 0x7FFFFFFF + + /* Additional custom blend modes can be returned by SDL_ComposeCustomBlendMode() */ + +} SDL_BlendMode; + +/** + * \brief The blend operation used when combining source and destination pixel components + */ +typedef enum +{ + SDL_BLENDOPERATION_ADD = 0x1, /**< dst + src: supported by all renderers */ + SDL_BLENDOPERATION_SUBTRACT = 0x2, /**< dst - src : supported by D3D9, D3D11, OpenGL, OpenGLES */ + SDL_BLENDOPERATION_REV_SUBTRACT = 0x3, /**< src - dst : supported by D3D9, D3D11, OpenGL, OpenGLES */ + SDL_BLENDOPERATION_MINIMUM = 0x4, /**< min(dst, src) : supported by D3D9, D3D11 */ + SDL_BLENDOPERATION_MAXIMUM = 0x5 /**< max(dst, src) : supported by D3D9, D3D11 */ +} SDL_BlendOperation; + +/** + * \brief The normalized factor used to multiply pixel components + */ +typedef enum +{ + SDL_BLENDFACTOR_ZERO = 0x1, /**< 0, 0, 0, 0 */ + SDL_BLENDFACTOR_ONE = 0x2, /**< 1, 1, 1, 1 */ + SDL_BLENDFACTOR_SRC_COLOR = 0x3, /**< srcR, srcG, srcB, srcA */ + SDL_BLENDFACTOR_ONE_MINUS_SRC_COLOR = 0x4, /**< 1-srcR, 1-srcG, 1-srcB, 1-srcA */ + SDL_BLENDFACTOR_SRC_ALPHA = 0x5, /**< srcA, srcA, srcA, srcA */ + SDL_BLENDFACTOR_ONE_MINUS_SRC_ALPHA = 0x6, /**< 1-srcA, 1-srcA, 1-srcA, 1-srcA */ + SDL_BLENDFACTOR_DST_COLOR = 0x7, /**< dstR, dstG, dstB, dstA */ + SDL_BLENDFACTOR_ONE_MINUS_DST_COLOR = 0x8, /**< 1-dstR, 1-dstG, 1-dstB, 1-dstA */ + SDL_BLENDFACTOR_DST_ALPHA = 0x9, /**< dstA, dstA, dstA, dstA */ + SDL_BLENDFACTOR_ONE_MINUS_DST_ALPHA = 0xA /**< 1-dstA, 1-dstA, 1-dstA, 1-dstA */ +} SDL_BlendFactor; + +/** + * Compose a custom blend mode for renderers. + * + * The functions SDL_SetRenderDrawBlendMode and SDL_SetTextureBlendMode accept + * the SDL_BlendMode returned by this function if the renderer supports it. + * + * A blend mode controls how the pixels from a drawing operation (source) get + * combined with the pixels from the render target (destination). First, the + * components of the source and destination pixels get multiplied with their + * blend factors. Then, the blend operation takes the two products and + * calculates the result that will get stored in the render target. + * + * Expressed in pseudocode, it would look like this: + * + * ```c + * dstRGB = colorOperation(srcRGB * srcColorFactor, dstRGB * dstColorFactor); + * dstA = alphaOperation(srcA * srcAlphaFactor, dstA * dstAlphaFactor); + * ``` + * + * Where the functions `colorOperation(src, dst)` and `alphaOperation(src, + * dst)` can return one of the following: + * + * - `src + dst` + * - `src - dst` + * - `dst - src` + * - `min(src, dst)` + * - `max(src, dst)` + * + * The red, green, and blue components are always multiplied with the first, + * second, and third components of the SDL_BlendFactor, respectively. The + * fourth component is not used. + * + * The alpha component is always multiplied with the fourth component of the + * SDL_BlendFactor. The other components are not used in the alpha + * calculation. + * + * Support for these blend modes varies for each renderer. To check if a + * specific SDL_BlendMode is supported, create a renderer and pass it to + * either SDL_SetRenderDrawBlendMode or SDL_SetTextureBlendMode. They will + * return with an error if the blend mode is not supported. + * + * This list describes the support of custom blend modes for each renderer in + * SDL 2.0.6. All renderers support the four blend modes listed in the + * SDL_BlendMode enumeration. + * + * - **direct3d**: Supports all operations with all factors. However, some + * factors produce unexpected results with `SDL_BLENDOPERATION_MINIMUM` and + * `SDL_BLENDOPERATION_MAXIMUM`. + * - **direct3d11**: Same as Direct3D 9. + * - **opengl**: Supports the `SDL_BLENDOPERATION_ADD` operation with all + * factors. OpenGL versions 1.1, 1.2, and 1.3 do not work correctly with SDL + * 2.0.6. + * - **opengles**: Supports the `SDL_BLENDOPERATION_ADD` operation with all + * factors. Color and alpha factors need to be the same. OpenGL ES 1 + * implementation specific: May also support `SDL_BLENDOPERATION_SUBTRACT` + * and `SDL_BLENDOPERATION_REV_SUBTRACT`. May support color and alpha + * operations being different from each other. May support color and alpha + * factors being different from each other. + * - **opengles2**: Supports the `SDL_BLENDOPERATION_ADD`, + * `SDL_BLENDOPERATION_SUBTRACT`, `SDL_BLENDOPERATION_REV_SUBTRACT` + * operations with all factors. + * - **psp**: No custom blend mode support. + * - **software**: No custom blend mode support. + * + * Some renderers do not provide an alpha component for the default render + * target. The `SDL_BLENDFACTOR_DST_ALPHA` and + * `SDL_BLENDFACTOR_ONE_MINUS_DST_ALPHA` factors do not have an effect in this + * case. + * + * \param srcColorFactor the SDL_BlendFactor applied to the red, green, and + * blue components of the source pixels + * \param dstColorFactor the SDL_BlendFactor applied to the red, green, and + * blue components of the destination pixels + * \param colorOperation the SDL_BlendOperation used to combine the red, + * green, and blue components of the source and + * destination pixels + * \param srcAlphaFactor the SDL_BlendFactor applied to the alpha component of + * the source pixels + * \param dstAlphaFactor the SDL_BlendFactor applied to the alpha component of + * the destination pixels + * \param alphaOperation the SDL_BlendOperation used to combine the alpha + * component of the source and destination pixels + * \returns an SDL_BlendMode that represents the chosen factors and + * operations. + * + * \since This function is available since SDL 2.0.6. + * + * \sa SDL_SetRenderDrawBlendMode + * \sa SDL_GetRenderDrawBlendMode + * \sa SDL_SetTextureBlendMode + * \sa SDL_GetTextureBlendMode + */ +extern DECLSPEC SDL_BlendMode SDLCALL SDL_ComposeCustomBlendMode(SDL_BlendFactor srcColorFactor, + SDL_BlendFactor dstColorFactor, + SDL_BlendOperation colorOperation, + SDL_BlendFactor srcAlphaFactor, + SDL_BlendFactor dstAlphaFactor, + SDL_BlendOperation alphaOperation); + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_blendmode_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_clipboard.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_clipboard.h new file mode 100644 index 0000000..9351363 --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_clipboard.h @@ -0,0 +1,94 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_clipboard.h + * + * Include file for SDL clipboard handling + */ + +#ifndef SDL_clipboard_h_ +#define SDL_clipboard_h_ + +#include "SDL_stdinc.h" + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* Function prototypes */ + +/** + * Put UTF-8 text into the clipboard. + * + * \param text the text to store in the clipboard + * \returns 0 on success or a negative error code on failure; call + * SDL_GetError() for more information. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetClipboardText + * \sa SDL_HasClipboardText + */ +extern DECLSPEC int SDLCALL SDL_SetClipboardText(const char *text); + +/** + * Get UTF-8 text from the clipboard, which must be freed with SDL_free(). + * + * This functions returns empty string if there was not enough memory left for + * a copy of the clipboard's content. + * + * \returns the clipboard text on success or an empty string on failure; call + * SDL_GetError() for more information. Caller must call SDL_free() + * on the returned pointer when done with it (even if there was an + * error). + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_HasClipboardText + * \sa SDL_SetClipboardText + */ +extern DECLSPEC char * SDLCALL SDL_GetClipboardText(void); + +/** + * Query whether the clipboard exists and contains a non-empty text string. + * + * \returns SDL_TRUE if the clipboard has text, or SDL_FALSE if it does not. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_GetClipboardText + * \sa SDL_SetClipboardText + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasClipboardText(void); + + +/* Ends C function definitions when using C++ */ +#ifdef __cplusplus +} +#endif +#include "close_code.h" + +#endif /* SDL_clipboard_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_config.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_config.h new file mode 100644 index 0000000..3ad3e8f --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_config.h @@ -0,0 +1,351 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +#ifndef SDL_config_windows_h_ +#define SDL_config_windows_h_ +#define SDL_config_h_ + +#include "SDL_platform.h" + +/* winsdkver.h defines _WIN32_MAXVER for SDK version detection. It is present since at least the Windows 7 SDK, + * but out of caution we'll only use it if the compiler supports __has_include() to confirm its presence. + * If your compiler doesn't support __has_include() but you have winsdkver.h, define HAVE_WINSDKVER_H. */ +#if !defined(HAVE_WINSDKVER_H) && defined(__has_include) +#if __has_include(<winsdkver.h>) +#define HAVE_WINSDKVER_H 1 +#endif +#endif + +#ifdef HAVE_WINSDKVER_H +#include <winsdkver.h> +#endif + +/* sdkddkver.h defines more specific SDK version numbers. This is needed because older versions of the + * Windows 10 SDK have broken declarations for the C API for DirectX 12. */ +#if !defined(HAVE_SDKDDKVER_H) && defined(__has_include) +#if __has_include(<sdkddkver.h>) +#define HAVE_SDKDDKVER_H 1 +#endif +#endif + +#ifdef HAVE_SDKDDKVER_H +#include <sdkddkver.h> +#endif + +/* This is a set of defines to configure the SDL features */ + +#if !defined(_STDINT_H_) && (!defined(HAVE_STDINT_H) || !_HAVE_STDINT_H) +#if defined(__GNUC__) || defined(__DMC__) || defined(__WATCOMC__) || defined(__clang__) || defined(__BORLANDC__) || defined(__CODEGEARC__) +#define HAVE_STDINT_H 1 +#elif defined(_MSC_VER) +typedef signed __int8 int8_t; +typedef unsigned __int8 uint8_t; +typedef signed __int16 int16_t; +typedef unsigned __int16 uint16_t; +typedef signed __int32 int32_t; +typedef unsigned __int32 uint32_t; +typedef signed __int64 int64_t; +typedef unsigned __int64 uint64_t; +#ifndef _UINTPTR_T_DEFINED +#ifdef _WIN64 +typedef unsigned __int64 uintptr_t; +#else +typedef unsigned int uintptr_t; +#endif +#define _UINTPTR_T_DEFINED +#endif +/* Older Visual C++ headers don't have the Win64-compatible typedefs... */ +#if ((_MSC_VER <= 1200) && (!defined(DWORD_PTR))) +#define DWORD_PTR DWORD +#endif +#if ((_MSC_VER <= 1200) && (!defined(LONG_PTR))) +#define LONG_PTR LONG +#endif +#else /* !__GNUC__ && !_MSC_VER */ +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef signed short int16_t; +typedef unsigned short uint16_t; +typedef signed int int32_t; +typedef unsigned int uint32_t; +typedef signed long long int64_t; +typedef unsigned long long uint64_t; +#ifndef _SIZE_T_DEFINED_ +#define _SIZE_T_DEFINED_ +typedef unsigned int size_t; +#endif +typedef unsigned int uintptr_t; +#endif /* __GNUC__ || _MSC_VER */ +#endif /* !_STDINT_H_ && !HAVE_STDINT_H */ + +#ifdef _WIN64 +# define SIZEOF_VOIDP 8 +#else +# define SIZEOF_VOIDP 4 +#endif + +#ifdef __clang__ +# define HAVE_GCC_ATOMICS 1 +#endif + +#define HAVE_DDRAW_H 1 +#define HAVE_DINPUT_H 1 +#define HAVE_DSOUND_H 1 +#ifndef __WATCOMC__ +#define HAVE_DXGI_H 1 +#define HAVE_XINPUT_H 1 +#if defined(_WIN32_MAXVER) && _WIN32_MAXVER >= 0x0A00 /* Windows 10 SDK */ +#define HAVE_WINDOWS_GAMING_INPUT_H 1 +#endif +#if defined(_WIN32_MAXVER) && _WIN32_MAXVER >= 0x0602 /* Windows 8 SDK */ +#define HAVE_D3D11_H 1 +#define HAVE_ROAPI_H 1 +#endif +#if defined(WDK_NTDDI_VERSION) && WDK_NTDDI_VERSION > 0x0A000008 /* 10.0.19041.0 */ +#define HAVE_D3D12_H 1 +#endif +#if defined(_WIN32_MAXVER) && _WIN32_MAXVER >= 0x0603 /* Windows 8.1 SDK */ +#define HAVE_SHELLSCALINGAPI_H 1 +#endif +#define HAVE_MMDEVICEAPI_H 1 +#define HAVE_AUDIOCLIENT_H 1 +#define HAVE_TPCSHRD_H 1 +#define HAVE_SENSORSAPI_H 1 +#endif +#if (defined(_M_IX86) || defined(_M_X64) || defined(_M_AMD64)) && (defined(_MSC_VER) && _MSC_VER >= 1600) +#define HAVE_IMMINTRIN_H 1 +#elif defined(__has_include) && (defined(__i386__) || defined(__x86_64)) +# if __has_include(<immintrin.h>) +# define HAVE_IMMINTRIN_H 1 +# endif +#endif + +/* This is disabled by default to avoid C runtime dependencies and manifest requirements */ +#ifdef HAVE_LIBC +/* Useful headers */ +#define STDC_HEADERS 1 +#define HAVE_CTYPE_H 1 +#define HAVE_FLOAT_H 1 +#define HAVE_LIMITS_H 1 +#define HAVE_MATH_H 1 +#define HAVE_SIGNAL_H 1 +#define HAVE_STDIO_H 1 +#define HAVE_STRING_H 1 + +/* C library functions */ +#define HAVE_MALLOC 1 +#define HAVE_CALLOC 1 +#define HAVE_REALLOC 1 +#define HAVE_FREE 1 +#define HAVE_ALLOCA 1 +/* OpenWatcom requires specific calling conventions for qsort and bsearch */ +#ifndef __WATCOMC__ +#define HAVE_QSORT 1 +#define HAVE_BSEARCH 1 +#endif +#define HAVE_ABS 1 +#define HAVE_MEMSET 1 +#define HAVE_MEMCPY 1 +#define HAVE_MEMMOVE 1 +#define HAVE_MEMCMP 1 +#define HAVE_STRLEN 1 +#define HAVE__STRREV 1 +/* These functions have security warnings, so we won't use them */ +/* #undef HAVE__STRUPR */ +/* #undef HAVE__STRLWR */ +#define HAVE_STRCHR 1 +#define HAVE_STRRCHR 1 +#define HAVE_STRSTR 1 +/* #undef HAVE_STRTOK_R */ +/* These functions have security warnings, so we won't use them */ +/* #undef HAVE__LTOA */ +/* #undef HAVE__ULTOA */ +#define HAVE_STRTOL 1 +#define HAVE_STRTOUL 1 +#define HAVE_STRTOD 1 +#define HAVE_ATOI 1 +#define HAVE_ATOF 1 +#define HAVE_STRCMP 1 +#define HAVE_STRNCMP 1 +#define HAVE__STRICMP 1 +#define HAVE__STRNICMP 1 +#define HAVE__WCSICMP 1 +#define HAVE__WCSNICMP 1 +#define HAVE__WCSDUP 1 +#define HAVE_ACOS 1 +#define HAVE_ASIN 1 +#define HAVE_ATAN 1 +#define HAVE_ATAN2 1 +#define HAVE_CEIL 1 +#define HAVE_COS 1 +#define HAVE_EXP 1 +#define HAVE_FABS 1 +#define HAVE_FLOOR 1 +#define HAVE_FMOD 1 +#define HAVE_LOG 1 +#define HAVE_LOG10 1 +#define HAVE_POW 1 +#define HAVE_SIN 1 +#define HAVE_SQRT 1 +#define HAVE_TAN 1 +#ifndef __WATCOMC__ +#define HAVE_ACOSF 1 +#define HAVE_ASINF 1 +#define HAVE_ATANF 1 +#define HAVE_ATAN2F 1 +#define HAVE_CEILF 1 +#define HAVE__COPYSIGN 1 +#define HAVE_COSF 1 +#define HAVE_EXPF 1 +#define HAVE_FABSF 1 +#define HAVE_FLOORF 1 +#define HAVE_FMODF 1 +#define HAVE_LOGF 1 +#define HAVE_LOG10F 1 +#define HAVE_POWF 1 +#define HAVE_SINF 1 +#define HAVE_SQRTF 1 +#define HAVE_TANF 1 +#endif +#if defined(_MSC_VER) +/* These functions were added with the VC++ 2013 C runtime library */ +#if _MSC_VER >= 1800 +#define HAVE_STRTOLL 1 +#define HAVE_STRTOULL 1 +#define HAVE_VSSCANF 1 +#define HAVE_LROUND 1 +#define HAVE_LROUNDF 1 +#define HAVE_ROUND 1 +#define HAVE_ROUNDF 1 +#define HAVE_SCALBN 1 +#define HAVE_SCALBNF 1 +#define HAVE_TRUNC 1 +#define HAVE_TRUNCF 1 +#endif +/* This function is available with at least the VC++ 2008 C runtime library */ +#if _MSC_VER >= 1400 +#define HAVE__FSEEKI64 1 +#endif +#ifdef _USE_MATH_DEFINES +#define HAVE_M_PI 1 +#endif +#elif defined(__WATCOMC__) +#define HAVE__FSEEKI64 1 +#define HAVE_STRTOLL 1 +#define HAVE_STRTOULL 1 +#define HAVE_VSSCANF 1 +#define HAVE_ROUND 1 +#define HAVE_SCALBN 1 +#define HAVE_TRUNC 1 +#else +#define HAVE_M_PI 1 +#endif +#else +#define HAVE_STDARG_H 1 +#define HAVE_STDDEF_H 1 +#endif + +/* Enable various audio drivers */ +#if defined(HAVE_MMDEVICEAPI_H) && defined(HAVE_AUDIOCLIENT_H) +#define SDL_AUDIO_DRIVER_WASAPI 1 +#endif +#define SDL_AUDIO_DRIVER_DSOUND 1 +#define SDL_AUDIO_DRIVER_WINMM 1 +#define SDL_AUDIO_DRIVER_DISK 1 +#define SDL_AUDIO_DRIVER_DUMMY 1 + +/* Enable various input drivers */ +#define SDL_JOYSTICK_DINPUT 1 +#define SDL_JOYSTICK_HIDAPI 1 +#ifndef __WINRT__ +#define SDL_JOYSTICK_RAWINPUT 1 +#endif +#define SDL_JOYSTICK_VIRTUAL 1 +#ifdef HAVE_WINDOWS_GAMING_INPUT_H +#define SDL_JOYSTICK_WGI 1 +#endif +#define SDL_JOYSTICK_XINPUT 1 +#define SDL_HAPTIC_DINPUT 1 +#define SDL_HAPTIC_XINPUT 1 + +/* Enable the sensor driver */ +#ifdef HAVE_SENSORSAPI_H +#define SDL_SENSOR_WINDOWS 1 +#else +#define SDL_SENSOR_DUMMY 1 +#endif + +/* Enable various shared object loading systems */ +#define SDL_LOADSO_WINDOWS 1 + +/* Enable various threading systems */ +#define SDL_THREAD_GENERIC_COND_SUFFIX 1 +#define SDL_THREAD_WINDOWS 1 + +/* Enable various timer systems */ +#define SDL_TIMER_WINDOWS 1 + +/* Enable various video drivers */ +#define SDL_VIDEO_DRIVER_DUMMY 1 +#define SDL_VIDEO_DRIVER_WINDOWS 1 + +#ifndef SDL_VIDEO_RENDER_D3D +#define SDL_VIDEO_RENDER_D3D 1 +#endif +#if !defined(SDL_VIDEO_RENDER_D3D11) && defined(HAVE_D3D11_H) +#define SDL_VIDEO_RENDER_D3D11 1 +#endif +#if !defined(SDL_VIDEO_RENDER_D3D12) && defined(HAVE_D3D12_H) +#define SDL_VIDEO_RENDER_D3D12 1 +#endif + +/* Enable OpenGL support */ +#ifndef SDL_VIDEO_OPENGL +#define SDL_VIDEO_OPENGL 1 +#endif +#ifndef SDL_VIDEO_OPENGL_WGL +#define SDL_VIDEO_OPENGL_WGL 1 +#endif +#ifndef SDL_VIDEO_RENDER_OGL +#define SDL_VIDEO_RENDER_OGL 1 +#endif +#ifndef SDL_VIDEO_RENDER_OGL_ES2 +#define SDL_VIDEO_RENDER_OGL_ES2 1 +#endif +#ifndef SDL_VIDEO_OPENGL_ES2 +#define SDL_VIDEO_OPENGL_ES2 1 +#endif +#ifndef SDL_VIDEO_OPENGL_EGL +#define SDL_VIDEO_OPENGL_EGL 1 +#endif + +/* Enable Vulkan support */ +#define SDL_VIDEO_VULKAN 1 + +/* Enable system power support */ +#define SDL_POWER_WINDOWS 1 + +/* Enable filesystem support */ +#define SDL_FILESYSTEM_WINDOWS 1 + +#endif /* SDL_config_windows_h_ */ + +/* vi: set ts=4 sw=4 expandtab: */ diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_cpuinfo.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_cpuinfo.h new file mode 100644 index 0000000..43a8ac5 --- /dev/null +++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_cpuinfo.h @@ -0,0 +1,593 @@ +/* + Simple DirectMedia Layer + Copyright (C) 1997-2022 Sam Lantinga <[email protected]> + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. +*/ + +/** + * \file SDL_cpuinfo.h + * + * CPU feature detection for SDL. + */ + +#ifndef SDL_cpuinfo_h_ +#define SDL_cpuinfo_h_ + +#include "SDL_stdinc.h" + +/* Need to do this here because intrin.h has C++ code in it */ +/* Visual Studio 2005 has a bug where intrin.h conflicts with winnt.h */ +#if defined(_MSC_VER) && (_MSC_VER >= 1500) && (defined(_M_IX86) || defined(_M_X64)) +#ifdef __clang__ +/* As of Clang 11, '_m_prefetchw' is conflicting with the winnt.h's version, + so we define the needed '_m_prefetch' here as a pseudo-header, until the issue is fixed. */ + +#ifndef __PRFCHWINTRIN_H +#define __PRFCHWINTRIN_H + +static __inline__ void __attribute__((__always_inline__, __nodebug__)) +_m_prefetch(void *__P) +{ + __builtin_prefetch (__P, 0, 3 /* _MM_HINT_T0 */); +} + +#endif /* __PRFCHWINTRIN_H */ +#endif /* __clang__ */ +#include <intrin.h> +#ifndef _WIN64 +#ifndef __MMX__ +#define __MMX__ +#endif +#ifndef __3dNOW__ +#define __3dNOW__ +#endif +#endif +#ifndef __SSE__ +#define __SSE__ +#endif +#ifndef __SSE2__ +#define __SSE2__ +#endif +#ifndef __SSE3__ +#define __SSE3__ +#endif +#elif defined(__MINGW64_VERSION_MAJOR) +#include <intrin.h> +#if !defined(SDL_DISABLE_ARM_NEON_H) && defined(__ARM_NEON) +# include <arm_neon.h> +#endif +#else +/* altivec.h redefining bool causes a number of problems, see bugs 3993 and 4392, so you need to explicitly define SDL_ENABLE_ALTIVEC_H to have it included. */ +#if defined(HAVE_ALTIVEC_H) && defined(__ALTIVEC__) && !defined(__APPLE_ALTIVEC__) && defined(SDL_ENABLE_ALTIVEC_H) +#include <altivec.h> +#endif +#if !defined(SDL_DISABLE_ARM_NEON_H) +# if defined(__ARM_NEON) +# include <arm_neon.h> +# elif defined(__WINDOWS__) || defined(__WINRT__) || defined(__GDK__) +/* Visual Studio doesn't define __ARM_ARCH, but _M_ARM (if set, always 7), and _M_ARM64 (if set, always 1). */ +# if defined(_M_ARM) +# include <armintr.h> +# include <arm_neon.h> +# define __ARM_NEON 1 /* Set __ARM_NEON so that it can be used elsewhere, at compile time */ +# endif +# if defined (_M_ARM64) +# include <arm64intr.h> +# include <arm64_neon.h> +# define __ARM_NEON 1 /* Set __ARM_NEON so that it can be used elsewhere, at compile time */ +# endif +# endif +#endif +#endif /* compiler version */ + +#if defined(__3dNOW__) && !defined(SDL_DISABLE_MM3DNOW_H) +#include <mm3dnow.h> +#endif +#if defined(__loongarch_sx) && !defined(SDL_DISABLE_LSX_H) +#include <lsxintrin.h> +#define __LSX__ +#endif +#if defined(__loongarch_asx) && !defined(SDL_DISABLE_LASX_H) +#include <lasxintrin.h> +#define __LASX__ +#endif +#if defined(HAVE_IMMINTRIN_H) && !defined(SDL_DISABLE_IMMINTRIN_H) +#include <immintrin.h> +#else +#if defined(__MMX__) && !defined(SDL_DISABLE_MMINTRIN_H) +#include <mmintrin.h> +#endif +#if defined(__SSE__) && !defined(SDL_DISABLE_XMMINTRIN_H) +#include <xmmintrin.h> +#endif +#if defined(__SSE2__) && !defined(SDL_DISABLE_EMMINTRIN_H) +#include <emmintrin.h> +#endif +#if defined(__SSE3__) && !defined(SDL_DISABLE_PMMINTRIN_H) +#include <pmmintrin.h> +#endif +#endif /* HAVE_IMMINTRIN_H */ + +#include "begin_code.h" +/* Set up for C function definitions, even when using C++ */ +#ifdef __cplusplus +extern "C" { +#endif + +/* This is a guess for the cacheline size used for padding. + * Most x86 processors have a 64 byte cache line. + * The 64-bit PowerPC processors have a 128 byte cache line. + * We'll use the larger value to be generally safe. + */ +#define SDL_CACHELINE_SIZE 128 + +/** + * Get the number of CPU cores available. + * + * \returns the total number of logical CPU cores. On CPUs that include + * technologies such as hyperthreading, the number of logical cores + * may be more than the number of physical cores. + * + * \since This function is available since SDL 2.0.0. + */ +extern DECLSPEC int SDLCALL SDL_GetCPUCount(void); + +/** + * Determine the L1 cache line size of the CPU. + * + * This is useful for determining multi-threaded structure padding or SIMD + * prefetch sizes. + * + * \returns the L1 cache line size of the CPU, in bytes. + * + * \since This function is available since SDL 2.0.0. + */ +extern DECLSPEC int SDLCALL SDL_GetCPUCacheLineSize(void); + +/** + * Determine whether the CPU has the RDTSC instruction. + * + * This always returns false on CPUs that aren't using Intel instruction sets. + * + * \returns SDL_TRUE if the CPU has the RDTSC instruction or SDL_FALSE if not. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_Has3DNow + * \sa SDL_HasAltiVec + * \sa SDL_HasAVX + * \sa SDL_HasAVX2 + * \sa SDL_HasMMX + * \sa SDL_HasSSE + * \sa SDL_HasSSE2 + * \sa SDL_HasSSE3 + * \sa SDL_HasSSE41 + * \sa SDL_HasSSE42 + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasRDTSC(void); + +/** + * Determine whether the CPU has AltiVec features. + * + * This always returns false on CPUs that aren't using PowerPC instruction + * sets. + * + * \returns SDL_TRUE if the CPU has AltiVec features or SDL_FALSE if not. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_Has3DNow + * \sa SDL_HasAVX + * \sa SDL_HasAVX2 + * \sa SDL_HasMMX + * \sa SDL_HasRDTSC + * \sa SDL_HasSSE + * \sa SDL_HasSSE2 + * \sa SDL_HasSSE3 + * \sa SDL_HasSSE41 + * \sa SDL_HasSSE42 + */ +extern DECLSPEC SDL_bool SDLCALL SDL_HasAltiVec(void); + +/** + * Determine whether the CPU has MMX features. + * + * This always returns false on CPUs that aren't using Intel instruction sets. + * + * \returns SDL_TRUE if the CPU has MMX features or SDL_FALSE if not. + * + * \since This function is available since SDL 2.0.0. + * + * \sa SDL_Has3DNow + * \sa SDL_HasAltiVec + * \sa SDL_HasAVX + * \sa SDL_HasAVX2 + * \sa SDL_HasRDTSC + * \sa SDL_HasSSE + * \sa SDL_HasSSE2 + * \sa SDL_HasSSE3 + * \sa SDL_HasSSE41 + * \sa SDL_HasSSE42 + */ +extern DECLSPEC SDL_bool SDLC |