Windows cross compiler yelling at me again, this should fix it

3 files changed, 7300 insertions, 0 deletions

diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_image.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_image.h
new file mode 100644
index 0000000..5933f74
--- /dev/null
+++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_image.h
@@ -0,0 +1,2173 @@
+/*
+  SDL_image:  An example image loading library for use with SDL
+  Copyright (C) 1997-2022 Sam Lantinga <[email protected]>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_image.h
+ *
+ *  Header file for SDL_image library
+ *
+ * A simple library to load images of various formats as SDL surfaces
+ */
+#ifndef SDL_IMAGE_H_
+#define SDL_IMAGE_H_
+
+#include "SDL.h"
+#include "SDL_version.h"
+#include "begin_code.h"
+
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Printable format: "%d.%d.%d", MAJOR, MINOR, PATCHLEVEL
+ */
+#define SDL_IMAGE_MAJOR_VERSION 2
+#define SDL_IMAGE_MINOR_VERSION 6
+#define SDL_IMAGE_PATCHLEVEL    0
+
+/**
+ * This macro can be used to fill a version structure with the compile-time
+ * version of the SDL_image library.
+ */
+#define SDL_IMAGE_VERSION(X)                        \
+{                                                   \
+    (X)->major = SDL_IMAGE_MAJOR_VERSION;           \
+    (X)->minor = SDL_IMAGE_MINOR_VERSION;           \
+    (X)->patch = SDL_IMAGE_PATCHLEVEL;              \
+}
+
+#if SDL_IMAGE_MAJOR_VERSION < 3 && SDL_MAJOR_VERSION < 3
+/**
+ *  This is the version number macro for the current SDL_image version.
+ *
+ *  In versions higher than 2.9.0, the minor version overflows into
+ *  the thousands digit: for example, 2.23.0 is encoded as 4300.
+ *  This macro will not be available in SDL 3.x or SDL_image 3.x.
+ *
+ *  Deprecated, use SDL_IMAGE_VERSION_ATLEAST or SDL_IMAGE_VERSION instead.
+ */
+#define SDL_IMAGE_COMPILEDVERSION \
+    SDL_VERSIONNUM(SDL_IMAGE_MAJOR_VERSION, SDL_IMAGE_MINOR_VERSION, SDL_IMAGE_PATCHLEVEL)
+#endif /* SDL_IMAGE_MAJOR_VERSION < 3 && SDL_MAJOR_VERSION < 3 */
+
+/**
+ *  This macro will evaluate to true if compiled with SDL_image at least X.Y.Z.
+ */
+#define SDL_IMAGE_VERSION_ATLEAST(X, Y, Z) \
+    ((SDL_IMAGE_MAJOR_VERSION >= X) && \
+     (SDL_IMAGE_MAJOR_VERSION > X || SDL_IMAGE_MINOR_VERSION >= Y) && \
+     (SDL_IMAGE_MAJOR_VERSION > X || SDL_IMAGE_MINOR_VERSION > Y || SDL_IMAGE_PATCHLEVEL >= Z))
+
+/**
+ * This function gets the version of the dynamically linked SDL_image library.
+ *
+ * it should NOT be used to fill a version structure, instead you should use
+ * the SDL_IMAGE_VERSION() macro.
+ *
+ * \returns SDL_image version
+ */
+extern DECLSPEC const SDL_version * SDLCALL IMG_Linked_Version(void);
+
+/**
+ * Initialization flags
+ */
+typedef enum
+{
+    IMG_INIT_JPG    = 0x00000001,
+    IMG_INIT_PNG    = 0x00000002,
+    IMG_INIT_TIF    = 0x00000004,
+    IMG_INIT_WEBP   = 0x00000008,
+    IMG_INIT_JXL    = 0x00000010,
+    IMG_INIT_AVIF   = 0x00000020
+} IMG_InitFlags;
+
+/**
+ * Initialize SDL_image.
+ *
+ * This function loads dynamic libraries that SDL_image needs, and prepares
+ * them for use. This must be the first function you call in SDL_image, and if
+ * it fails you should not continue with the library.
+ *
+ * Flags should be one or more flags from IMG_InitFlags OR'd together. It
+ * returns the flags successfully initialized, or 0 on failure.
+ *
+ * Currently, these flags are:
+ *
+ * - `_INIT_JPG`
+ * - `_INIT_PNG`
+ * - `_INIT_TIF`
+ * - `_INIT_WEBP`
+ * - `_INIT_JXL`
+ * - `_INIT_AVIF`
+ *
+ * More flags may be added in a future SDL_image release.
+ *
+ * This function may need to load external shared libraries to support various
+ * codecs, which means this function can fail to initialize that support on an
+ * otherwise-reasonable system if the library isn't available; this is not
+ * just a question of exceptional circumstances like running out of memory at
+ * startup!
+ *
+ * Note that you may call this function more than once to initialize with
+ * additional flags. The return value will reflect both new flags that
+ * successfully initialized, and also include flags that had previously been
+ * initialized as well.
+ *
+ * As this will return previously-initialized flags, it's legal to call this
+ * with zero (no flags set). This is a safe no-op that can be used to query
+ * the current initialization state without changing it at all.
+ *
+ * Since this returns previously-initialized flags as well as new ones, and
+ * you can call this with zero, you should not check for a zero return value
+ * to determine an error condition. Instead, you should check to make sure all
+ * the flags you require are set in the return value. If you have a game with
+ * data in a specific format, this might be a fatal error. If you're a generic
+ * image displaying app, perhaps you are fine with only having JPG and PNG
+ * support and can live without WEBP, even if you request support for
+ * everything.
+ *
+ * Unlike other SDL satellite libraries, calls to IMG_Init do not stack; a
+ * single call to IMG_Quit() will deinitialize everything and does not have to
+ * be paired with a matching IMG_Init call. For that reason, it's considered
+ * best practices to have a single IMG_Init and IMG_Quit call in your program.
+ * While this isn't required, be aware of the risks of deviating from that
+ * behavior.
+ *
+ * After initializing SDL_image, the app may begin to load images into
+ * SDL_Surfaces or SDL_Textures.
+ *
+ * \param flags initialization flags, OR'd together.
+ * \returns all currently initialized flags.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_Quit
+ */
+extern DECLSPEC int SDLCALL IMG_Init(int flags);
+
+/**
+ * Deinitialize SDL_image.
+ *
+ * This should be the last function you call in SDL_image, after freeing all
+ * other resources. This will unload any shared libraries it is using for
+ * various codecs.
+ *
+ * After this call, a call to IMG_Init(0) will return 0 (no codecs loaded).
+ *
+ * You can safely call IMG_Init() to reload various codec support after this
+ * call.
+ *
+ * Unlike other SDL satellite libraries, calls to IMG_Init do not stack; a
+ * single call to IMG_Quit() will deinitialize everything and does not have to
+ * be paired with a matching IMG_Init call. For that reason, it's considered
+ * best practices to have a single IMG_Init and IMG_Quit call in your program.
+ * While this isn't required, be aware of the risks of deviating from that
+ * behavior.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_Init
+ */
+extern DECLSPEC void SDLCALL IMG_Quit(void);
+
+/**
+ * Load an image from an SDL data source into a software surface.
+ *
+ * An SDL_Surface is a buffer of pixels in memory accessible by the CPU. Use
+ * this if you plan to hand the data to something else or manipulate it
+ * further in code.
+ *
+ * There are no guarantees about what format the new SDL_Surface data will be;
+ * in many cases, SDL_image will attempt to supply a surface that exactly
+ * matches the provided image, but in others it might have to convert (either
+ * because the image is in a format that SDL doesn't directly support or
+ * because it's compressed data that could reasonably uncompress to various
+ * formats and SDL_image had to pick one). You can inspect an SDL_Surface for
+ * its specifics, and use SDL_ConvertSurface to then migrate to any supported
+ * format.
+ *
+ * If the image format supports a transparent pixel, SDL will set the colorkey
+ * for the surface. You can enable RLE acceleration on the surface afterwards
+ * by calling: SDL_SetColorKey(image, SDL_RLEACCEL, image->format->colorkey);
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_image reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * Even though this function accepts a file type, SDL_image may still try
+ * other decoders that are capable of detecting file type from the contents of
+ * the image data, but may rely on the caller-provided type string for formats
+ * that it cannot autodetect. If `type` is NULL, SDL_image will rely solely on
+ * its ability to guess the format.
+ *
+ * There is a separate function to read files from disk without having to deal
+ * with SDL_RWops: `IMG_Load("filename.jpg")` will call this function and
+ * manage those details for you, determining the file type from the filename's
+ * extension.
+ *
+ * There is also IMG_Load_RW(), which is equivalent to this function except
+ * that it will rely on SDL_image to determine what type of data it is
+ * loading, much like passing a NULL for type.
+ *
+ * If you are using SDL's 2D rendering API, there is an equivalent call to
+ * load images directly into an SDL_Texture for use by the GPU without using a
+ * software surface: call IMG_LoadTextureTyped_RW() instead.
+ *
+ * When done with the returned surface, the app should dispose of it with a
+ * call to SDL_FreeSurface().
+ *
+ * \param src an SDL_RWops that data will be read from.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \param type a filename extension that represent this data ("BMP", "GIF",
+ *             "PNG", etc).
+ * \returns a new SDL surface, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_Load
+ * \sa IMG_Load_RW
+ * \sa SDL_FreeSurface
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTyped_RW(SDL_RWops *src, int freesrc, const char *type);
+
+/**
+ * Load an image from a filesystem path into a software surface.
+ *
+ * An SDL_Surface is a buffer of pixels in memory accessible by the CPU. Use
+ * this if you plan to hand the data to something else or manipulate it
+ * further in code.
+ *
+ * There are no guarantees about what format the new SDL_Surface data will be;
+ * in many cases, SDL_image will attempt to supply a surface that exactly
+ * matches the provided image, but in others it might have to convert (either
+ * because the image is in a format that SDL doesn't directly support or
+ * because it's compressed data that could reasonably uncompress to various
+ * formats and SDL_image had to pick one). You can inspect an SDL_Surface for
+ * its specifics, and use SDL_ConvertSurface to then migrate to any supported
+ * format.
+ *
+ * If the image format supports a transparent pixel, SDL will set the colorkey
+ * for the surface. You can enable RLE acceleration on the surface afterwards
+ * by calling: SDL_SetColorKey(image, SDL_RLEACCEL, image->format->colorkey);
+ *
+ * There is a separate function to read files from an SDL_RWops, if you need
+ * an i/o abstraction to provide data from anywhere instead of a simple
+ * filesystem read; that function is IMG_Load_RW().
+ *
+ * If you are using SDL's 2D rendering API, there is an equivalent call to
+ * load images directly into an SDL_Texture for use by the GPU without using a
+ * software surface: call IMG_LoadTexture() instead.
+ *
+ * When done with the returned surface, the app should dispose of it with a
+ * call to SDL_FreeSurface().
+ *
+ * \param file a path on the filesystem to load an image from.
+ * \returns a new SDL surface, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadTyped_RW
+ * \sa IMG_Load_RW
+ * \sa SDL_FreeSurface
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_Load(const char *file);
+
+/**
+ * Load an image from an SDL data source into a software surface.
+ *
+ * An SDL_Surface is a buffer of pixels in memory accessible by the CPU. Use
+ * this if you plan to hand the data to something else or manipulate it
+ * further in code.
+ *
+ * There are no guarantees about what format the new SDL_Surface data will be;
+ * in many cases, SDL_image will attempt to supply a surface that exactly
+ * matches the provided image, but in others it might have to convert (either
+ * because the image is in a format that SDL doesn't directly support or
+ * because it's compressed data that could reasonably uncompress to various
+ * formats and SDL_image had to pick one). You can inspect an SDL_Surface for
+ * its specifics, and use SDL_ConvertSurface to then migrate to any supported
+ * format.
+ *
+ * If the image format supports a transparent pixel, SDL will set the colorkey
+ * for the surface. You can enable RLE acceleration on the surface afterwards
+ * by calling: SDL_SetColorKey(image, SDL_RLEACCEL, image->format->colorkey);
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_image reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * There is a separate function to read files from disk without having to deal
+ * with SDL_RWops: `IMG_Load("filename.jpg")` will call this function and
+ * manage those details for you, determining the file type from the filename's
+ * extension.
+ *
+ * There is also IMG_LoadTyped_RW(), which is equivalent to this function
+ * except a file extension (like "BMP", "JPG", etc) can be specified, in case
+ * SDL_image cannot autodetect the file format.
+ *
+ * If you are using SDL's 2D rendering API, there is an equivalent call to
+ * load images directly into an SDL_Texture for use by the GPU without using a
+ * software surface: call IMG_LoadTexture_RW() instead.
+ *
+ * When done with the returned surface, the app should dispose of it with a
+ * call to SDL_FreeSurface().
+ *
+ * \param src an SDL_RWops that data will be read from.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \returns a new SDL surface, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_Load
+ * \sa IMG_LoadTyped_RW
+ * \sa SDL_FreeSurface
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_Load_RW(SDL_RWops *src, int freesrc);
+
+#if SDL_VERSION_ATLEAST(2,0,0)
+
+/**
+ * Load an image from a filesystem path into a GPU texture.
+ *
+ * An SDL_Texture represents an image in GPU memory, usable by SDL's 2D Render
+ * API. This can be significantly more efficient than using a CPU-bound
+ * SDL_Surface if you don't need to manipulate the image directly after
+ * loading it.
+ *
+ * If the loaded image has transparency or a colorkey, a texture with an alpha
+ * channel will be created. Otherwise, SDL_image will attempt to create an
+ * SDL_Texture in the most format that most reasonably represents the image
+ * data (but in many cases, this will just end up being 32-bit RGB or 32-bit
+ * RGBA).
+ *
+ * There is a separate function to read files from an SDL_RWops, if you need
+ * an i/o abstraction to provide data from anywhere instead of a simple
+ * filesystem read; that function is IMG_LoadTexture_RW().
+ *
+ * If you would rather decode an image to an SDL_Surface (a buffer of pixels
+ * in CPU memory), call IMG_Load() instead.
+ *
+ * When done with the returned texture, the app should dispose of it with a
+ * call to SDL_DestroyTexture().
+ *
+ * \param renderer the SDL_Renderer to use to create the GPU texture.
+ * \param file a path on the filesystem to load an image from.
+ * \returns a new texture, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadTextureTyped_RW
+ * \sa IMG_LoadTexture_RW
+ * \sa SDL_DestroyTexture
+ */
+extern DECLSPEC SDL_Texture * SDLCALL IMG_LoadTexture(SDL_Renderer *renderer, const char *file);
+
+/**
+ * Load an image from an SDL data source into a GPU texture.
+ *
+ * An SDL_Texture represents an image in GPU memory, usable by SDL's 2D Render
+ * API. This can be significantly more efficient than using a CPU-bound
+ * SDL_Surface if you don't need to manipulate the image directly after
+ * loading it.
+ *
+ * If the loaded image has transparency or a colorkey, a texture with an alpha
+ * channel will be created. Otherwise, SDL_image will attempt to create an
+ * SDL_Texture in the most format that most reasonably represents the image
+ * data (but in many cases, this will just end up being 32-bit RGB or 32-bit
+ * RGBA).
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_image reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * There is a separate function to read files from disk without having to deal
+ * with SDL_RWops: `IMG_LoadTexture(renderer, "filename.jpg")` will call this
+ * function and manage those details for you, determining the file type from
+ * the filename's extension.
+ *
+ * There is also IMG_LoadTextureTyped_RW(), which is equivalent to this
+ * function except a file extension (like "BMP", "JPG", etc) can be specified,
+ * in case SDL_image cannot autodetect the file format.
+ *
+ * If you would rather decode an image to an SDL_Surface (a buffer of pixels
+ * in CPU memory), call IMG_Load() instead.
+ *
+ * When done with the returned texture, the app should dispose of it with a
+ * call to SDL_DestroyTexture().
+ *
+ * \param renderer the SDL_Renderer to use to create the GPU texture.
+ * \param src an SDL_RWops that data will be read from.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \returns a new texture, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadTexture
+ * \sa IMG_LoadTextureTyped_RW
+ * \sa SDL_DestroyTexture
+ */
+extern DECLSPEC SDL_Texture * SDLCALL IMG_LoadTexture_RW(SDL_Renderer *renderer, SDL_RWops *src, int freesrc);
+
+/**
+ * Load an image from an SDL data source into a GPU texture.
+ *
+ * An SDL_Texture represents an image in GPU memory, usable by SDL's 2D Render
+ * API. This can be significantly more efficient than using a CPU-bound
+ * SDL_Surface if you don't need to manipulate the image directly after
+ * loading it.
+ *
+ * If the loaded image has transparency or a colorkey, a texture with an alpha
+ * channel will be created. Otherwise, SDL_image will attempt to create an
+ * SDL_Texture in the most format that most reasonably represents the image
+ * data (but in many cases, this will just end up being 32-bit RGB or 32-bit
+ * RGBA).
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_image reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * Even though this function accepts a file type, SDL_image may still try
+ * other decoders that are capable of detecting file type from the contents of
+ * the image data, but may rely on the caller-provided type string for formats
+ * that it cannot autodetect. If `type` is NULL, SDL_image will rely solely on
+ * its ability to guess the format.
+ *
+ * There is a separate function to read files from disk without having to deal
+ * with SDL_RWops: `IMG_LoadTexture("filename.jpg")` will call this function
+ * and manage those details for you, determining the file type from the
+ * filename's extension.
+ *
+ * There is also IMG_LoadTexture_RW(), which is equivalent to this function
+ * except that it will rely on SDL_image to determine what type of data it is
+ * loading, much like passing a NULL for type.
+ *
+ * If you would rather decode an image to an SDL_Surface (a buffer of pixels
+ * in CPU memory), call IMG_LoadTyped_RW() instead.
+ *
+ * When done with the returned texture, the app should dispose of it with a
+ * call to SDL_DestroyTexture().
+ *
+ * \param renderer the SDL_Renderer to use to create the GPU texture.
+ * \param src an SDL_RWops that data will be read from.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \param type a filename extension that represent this data ("BMP", "GIF",
+ *             "PNG", etc).
+ * \returns a new texture, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadTexture
+ * \sa IMG_LoadTexture_RW
+ * \sa SDL_DestroyTexture
+ */
+extern DECLSPEC SDL_Texture * SDLCALL IMG_LoadTextureTyped_RW(SDL_Renderer *renderer, SDL_RWops *src, int freesrc, const char *type);
+#endif /* SDL 2.0 */
+
+/**
+ * Detect AVIF image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is AVIF data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isAVIF(SDL_RWops *src);
+
+/**
+ * Detect ICO image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is ICO data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isICO(SDL_RWops *src);
+
+/**
+ * Detect CUR image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is CUR data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isCUR(SDL_RWops *src);
+
+/**
+ * Detect BMP image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is BMP data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isBMP(SDL_RWops *src);
+
+/**
+ * Detect GIF image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is GIF data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isGIF(SDL_RWops *src);
+
+/**
+ * Detect JPG image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is JPG data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isJPG(SDL_RWops *src);
+
+/**
+ * Detect JXL image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is JXL data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isJXL(SDL_RWops *src);
+
+/**
+ * Detect LBM image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is LBM data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isLBM(SDL_RWops *src);
+
+/**
+ * Detect PCX image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is PCX data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isPCX(SDL_RWops *src);
+
+/**
+ * Detect PNG image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is PNG data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isPNG(SDL_RWops *src);
+
+/**
+ * Detect PNM image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is PNM data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isPNM(SDL_RWops *src);
+
+/**
+ * Detect SVG image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is SVG data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.2.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isSVG(SDL_RWops *src);
+
+/**
+ * Detect QOI image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is QOI data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isQOI(SDL_RWops *src);
+
+/**
+ * Detect TIFF image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is TIFF data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isTIF(SDL_RWops *src);
+
+/**
+ * Detect XCF image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is XCF data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isXCF(SDL_RWops *src);
+
+/**
+ * Detect XPM image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is XPM data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXV
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isXPM(SDL_RWops *src);
+
+/**
+ * Detect XV image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is XV data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isWEBP
+ */
+extern DECLSPEC int SDLCALL IMG_isXV(SDL_RWops *src);
+
+/**
+ * Detect WEBP image data on a readable/seekable SDL_RWops.
+ *
+ * This function attempts to determine if a file is a given filetype, reading
+ * the least amount possible from the SDL_RWops (usually a few bytes).
+ *
+ * There is no distinction made between "not the filetype in question" and
+ * basic i/o errors.
+ *
+ * This function will always attempt to seek the RWops back to where it
+ * started when this function was called, but it will not report any errors in
+ * doing so, but assuming seeking works, this means you can immediately use
+ * this with a different IMG_isTYPE function, or load the image without
+ * further seeking.
+ *
+ * You do not need to call this function to load data; SDL_image can work to
+ * determine file type in many cases in its standard load functions.
+ *
+ * \param src a seekable/readable SDL_RWops to provide image data.
+ * \returns non-zero if this is WEBP data, zero otherwise.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_isAVIF
+ * \sa IMG_isICO
+ * \sa IMG_isCUR
+ * \sa IMG_isBMP
+ * \sa IMG_isGIF
+ * \sa IMG_isJPG
+ * \sa IMG_isJXL
+ * \sa IMG_isLBM
+ * \sa IMG_isPCX
+ * \sa IMG_isPNG
+ * \sa IMG_isPNM
+ * \sa IMG_isSVG
+ * \sa IMG_isQOI
+ * \sa IMG_isTIF
+ * \sa IMG_isXCF
+ * \sa IMG_isXPM
+ * \sa IMG_isXV
+ */
+extern DECLSPEC int SDLCALL IMG_isWEBP(SDL_RWops *src);
+
+/**
+ * Load a AVIF image directly.
+ *
+ * If you know you definitely have a AVIF image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadAVIF_RW(SDL_RWops *src);
+
+/**
+ * Load a ICO image directly.
+ *
+ * If you know you definitely have a ICO image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadICO_RW(SDL_RWops *src);
+
+/**
+ * Load a CUR image directly.
+ *
+ * If you know you definitely have a CUR image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadCUR_RW(SDL_RWops *src);
+
+/**
+ * Load a BMP image directly.
+ *
+ * If you know you definitely have a BMP image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadBMP_RW(SDL_RWops *src);
+
+/**
+ * Load a GIF image directly.
+ *
+ * If you know you definitely have a GIF image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadGIF_RW(SDL_RWops *src);
+
+/**
+ * Load a JPG image directly.
+ *
+ * If you know you definitely have a JPG image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadJPG_RW(SDL_RWops *src);
+
+/**
+ * Load a JXL image directly.
+ *
+ * If you know you definitely have a JXL image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadJXL_RW(SDL_RWops *src);
+
+/**
+ * Load a LBM image directly.
+ *
+ * If you know you definitely have a LBM image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadLBM_RW(SDL_RWops *src);
+
+/**
+ * Load a PCX image directly.
+ *
+ * If you know you definitely have a PCX image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPCX_RW(SDL_RWops *src);
+
+/**
+ * Load a PNG image directly.
+ *
+ * If you know you definitely have a PNG image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPNG_RW(SDL_RWops *src);
+
+/**
+ * Load a PNM image directly.
+ *
+ * If you know you definitely have a PNM image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPNM_RW(SDL_RWops *src);
+
+/**
+ * Load a SVG image directly.
+ *
+ * If you know you definitely have a SVG image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.2.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadSVG_RW(SDL_RWops *src);
+
+/**
+ * Load a QOI image directly.
+ *
+ * If you know you definitely have a QOI image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadQOI_RW(SDL_RWops *src);
+
+/**
+ * Load a TGA image directly.
+ *
+ * If you know you definitely have a TGA image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTGA_RW(SDL_RWops *src);
+
+/**
+ * Load a TIFF image directly.
+ *
+ * If you know you definitely have a TIFF image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTIF_RW(SDL_RWops *src);
+
+/**
+ * Load a XCF image directly.
+ *
+ * If you know you definitely have a XCF image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXCF_RW(SDL_RWops *src);
+
+/**
+ * Load a XPM image directly.
+ *
+ * If you know you definitely have a XPM image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXV_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXPM_RW(SDL_RWops *src);
+
+/**
+ * Load a XV image directly.
+ *
+ * If you know you definitely have a XV image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadWEBP_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXV_RW(SDL_RWops *src);
+
+/**
+ * Load a WEBP image directly.
+ *
+ * If you know you definitely have a WEBP image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops to load image data from.
+ * \returns SDL surface, or NULL on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_LoadAVIF_RW
+ * \sa IMG_LoadICO_RW
+ * \sa IMG_LoadCUR_RW
+ * \sa IMG_LoadBMP_RW
+ * \sa IMG_LoadGIF_RW
+ * \sa IMG_LoadJPG_RW
+ * \sa IMG_LoadJXL_RW
+ * \sa IMG_LoadLBM_RW
+ * \sa IMG_LoadPCX_RW
+ * \sa IMG_LoadPNG_RW
+ * \sa IMG_LoadPNM_RW
+ * \sa IMG_LoadSVG_RW
+ * \sa IMG_LoadQOI_RW
+ * \sa IMG_LoadTGA_RW
+ * \sa IMG_LoadTIF_RW
+ * \sa IMG_LoadXCF_RW
+ * \sa IMG_LoadXPM_RW
+ * \sa IMG_LoadXV_RW
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadWEBP_RW(SDL_RWops *src);
+
+/**
+ * Load an SVG image, scaled to a specific size.
+ *
+ * Since SVG files are resolution-independent, you specify the size you would
+ * like the output image to be and it will be generated at those dimensions.
+ *
+ * Either width or height may be 0 and the image will be auto-sized to
+ * preserve aspect ratio.
+ *
+ * When done with the returned surface, the app should dispose of it with a
+ * call to SDL_FreeSurface().
+ *
+ * \param src an SDL_RWops to load SVG data from.
+ * \param width desired width of the generated surface, in pixels.
+ * \param height desired height of the generated surface, in pixels.
+ * \returns a new SDL surface, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadSizedSVG_RW(SDL_RWops *src, int width, int height);
+
+/**
+ * Load an XPM image from a memory array.
+ *
+ * The returned surface will be an 8bpp indexed surface, if possible,
+ * otherwise it will be 32bpp. If you always want 32-bit data, use
+ * IMG_ReadXPMFromArrayToRGB888() instead.
+ *
+ * When done with the returned surface, the app should dispose of it with a
+ * call to SDL_FreeSurface().
+ *
+ * \param xpm a null-terminated array of strings that comprise XPM data.
+ * \returns a new SDL surface, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_ReadXPMFromArrayToRGB888
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_ReadXPMFromArray(char **xpm);
+
+/**
+ * Load an XPM image from a memory array.
+ *
+ * The returned surface will always be a 32-bit RGB surface. If you want 8-bit
+ * indexed colors (and the XPM data allows it), use IMG_ReadXPMFromArray()
+ * instead.
+ *
+ * When done with the returned surface, the app should dispose of it with a
+ * call to SDL_FreeSurface().
+ *
+ * \param xpm a null-terminated array of strings that comprise XPM data.
+ * \returns a new SDL surface, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_ReadXPMFromArray
+ */
+extern DECLSPEC SDL_Surface * SDLCALL IMG_ReadXPMFromArrayToRGB888(char **xpm);
+
+/**
+ * Save an SDL_Surface into a PNG image file.
+ *
+ * If the file already exists, it will be overwritten.
+ *
+ * \param surface the SDL surface to save
+ * \param file path on the filesystem to write new file to.
+ * \returns 0 if successful, -1 on error
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_SavePNG_RW
+ * \sa IMG_SaveJPG
+ * \sa IMG_SaveJPG_RW
+ */
+extern DECLSPEC int SDLCALL IMG_SavePNG(SDL_Surface *surface, const char *file);
+
+/**
+ * Save an SDL_Surface into PNG image data, via an SDL_RWops.
+ *
+ * If you just want to save to a filename, you can use IMG_SavePNG() instead.
+ *
+ * \param surface the SDL surface to save
+ * \param dst the SDL_RWops to save the image data to.
+ * \returns 0 if successful, -1 on error.
+ *
+ * \since This function is available since SDL_image 2.0.0.
+ *
+ * \sa IMG_SavePNG
+ * \sa IMG_SaveJPG
+ * \sa IMG_SaveJPG_RW
+ */
+extern DECLSPEC int SDLCALL IMG_SavePNG_RW(SDL_Surface *surface, SDL_RWops *dst, int freedst);
+
+/**
+ * Save an SDL_Surface into a JPEG image file.
+ *
+ * If the file already exists, it will be overwritten.
+ *
+ * \param surface the SDL surface to save
+ * \param file path on the filesystem to write new file to.
+ * \param quality [0; 33] is Lowest quality, [34; 66] is Middle quality, [67;
+ *                100] is Highest quality
+ * \returns 0 if successful, -1 on error
+ *
+ * \since This function is available since SDL_image 2.0.2.
+ *
+ * \sa IMG_SaveJPG_RW
+ * \sa IMG_SavePNG
+ * \sa IMG_SavePNG_RW
+ */
+extern DECLSPEC int SDLCALL IMG_SaveJPG(SDL_Surface *surface, const char *file, int quality);
+
+/**
+ * Save an SDL_Surface into JPEG image data, via an SDL_RWops.
+ *
+ * If you just want to save to a filename, you can use IMG_SaveJPG() instead.
+ *
+ * \param surface the SDL surface to save
+ * \param dst the SDL_RWops to save the image data to.
+ * \returns 0 if successful, -1 on error.
+ *
+ * \since This function is available since SDL_image 2.0.2.
+ *
+ * \sa IMG_SaveJPG
+ * \sa IMG_SavePNG
+ * \sa IMG_SavePNG_RW
+ */
+extern DECLSPEC int SDLCALL IMG_SaveJPG_RW(SDL_Surface *surface, SDL_RWops *dst, int freedst, int quality);
+
+/**
+ * Animated image support
+ * Currently only animated GIFs are supported.
+ */
+typedef struct
+{
+	int w, h;
+	int count;
+	SDL_Surface **frames;
+	int *delays;
+} IMG_Animation;
+
+/**
+ * Load an animation from a file.
+ *
+ * When done with the returned animation, the app should dispose of it with a
+ * call to IMG_FreeAnimation().
+ *
+ * \param file path on the filesystem containing an animated image.
+ * \returns a new IMG_Animation, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_FreeAnimation
+ */
+extern DECLSPEC IMG_Animation * SDLCALL IMG_LoadAnimation(const char *file);
+
+/**
+ * Load an animation from an SDL_RWops.
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_image reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * When done with the returned animation, the app should dispose of it with a
+ * call to IMG_FreeAnimation().
+ *
+ * \param src an SDL_RWops that data will be read from.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \returns a new IMG_Animation, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_FreeAnimation
+ */
+extern DECLSPEC IMG_Animation * SDLCALL IMG_LoadAnimation_RW(SDL_RWops *src, int freesrc);
+
+/**
+ * Load an animation from an SDL datasource
+ *
+ * Even though this function accepts a file type, SDL_image may still try
+ * other decoders that are capable of detecting file type from the contents of
+ * the image data, but may rely on the caller-provided type string for formats
+ * that it cannot autodetect. If `type` is NULL, SDL_image will rely solely on
+ * its ability to guess the format.
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_image reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * When done with the returned animation, the app should dispose of it with a
+ * call to IMG_FreeAnimation().
+ *
+ * \param src an SDL_RWops that data will be read from.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \param type a filename extension that represent this data ("GIF", etc).
+ * \returns a new IMG_Animation, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_LoadAnimation
+ * \sa IMG_LoadAnimation_RW
+ * \sa IMG_FreeAnimation
+ */
+extern DECLSPEC IMG_Animation * SDLCALL IMG_LoadAnimationTyped_RW(SDL_RWops *src, int freesrc, const char *type);
+
+/**
+ * Dispose of an IMG_Animation and free its resources.
+ *
+ * The provided `anim` pointer is not valid once this call returns.
+ *
+ * \param anim IMG_Animation to dispose of.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_LoadAnimation
+ * \sa IMG_LoadAnimation_RW
+ * \sa IMG_LoadAnimationTyped_RW
+ */
+extern DECLSPEC void SDLCALL IMG_FreeAnimation(IMG_Animation *anim);
+
+/**
+ * Load a GIF animation directly.
+ *
+ * If you know you definitely have a GIF image, you can call this function,
+ * which will skip SDL_image's file format detection routines. Generally it's
+ * better to use the abstract interfaces; also, there is only an SDL_RWops
+ * interface available here.
+ *
+ * \param src an SDL_RWops that data will be read from.
+ * \returns a new IMG_Animation, or NULL on error.
+ *
+ * \since This function is available since SDL_image 2.6.0.
+ *
+ * \sa IMG_LoadAnimation
+ * \sa IMG_LoadAnimation_RW
+ * \sa IMG_LoadAnimationTyped_RW
+ * \sa IMG_FreeAnimation
+ */
+extern DECLSPEC IMG_Animation * SDLCALL IMG_LoadGIFAnimation_RW(SDL_RWops *src);
+
+/**
+ * Report SDL_image errors
+ *
+ * \sa IMG_GetError
+ */
+#define IMG_SetError    SDL_SetError
+
+/**
+ * Get last SDL_image error
+ *
+ * \sa IMG_SetError
+ */
+#define IMG_GetError    SDL_GetError
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_IMAGE_H_ */
diff --git a/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_mixer.h b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_mixer.h
new file mode 100644
index 0000000..5ed1445
--- /dev/null
+++ b/WindowsShit/SDL2-2.24.0/x86_64-w64-mingw32/include/SDL2/SDL_mixer.h
@@ -0,0 +1,2784 @@
+/*
+  SDL_mixer:  An audio mixer library based on the SDL library
+  Copyright (C) 1997-2022 Sam Lantinga <[email protected]>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_mixer.h
+ *
+ *  Header file for SDL_mixer library
+ *
+ * A simple library to play and mix sounds and musics
+ */
+#ifndef SDL_MIXER_H_
+#define SDL_MIXER_H_
+
+#include "SDL_stdinc.h"
+#include "SDL_rwops.h"
+#include "SDL_audio.h"
+#include "SDL_endian.h"
+#include "SDL_version.h"
+#include "begin_code.h"
+
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Printable format: "%d.%d.%d", MAJOR, MINOR, PATCHLEVEL
+ */
+#define SDL_MIXER_MAJOR_VERSION 2
+#define SDL_MIXER_MINOR_VERSION 6
+#define SDL_MIXER_PATCHLEVEL    1
+
+/**
+ * This macro can be used to fill a version structure with the compile-time
+ * version of the SDL_mixer library.
+ */
+#define SDL_MIXER_VERSION(X)                        \
+{                                                   \
+    (X)->major = SDL_MIXER_MAJOR_VERSION;           \
+    (X)->minor = SDL_MIXER_MINOR_VERSION;           \
+    (X)->patch = SDL_MIXER_PATCHLEVEL;              \
+}
+
+/* Backwards compatibility */
+#define MIX_MAJOR_VERSION   SDL_MIXER_MAJOR_VERSION
+#define MIX_MINOR_VERSION   SDL_MIXER_MINOR_VERSION
+#define MIX_PATCHLEVEL      SDL_MIXER_PATCHLEVEL
+#define MIX_VERSION(X)      SDL_MIXER_VERSION(X)
+
+#if SDL_MIXER_MAJOR_VERSION < 3 && SDL_MAJOR_VERSION < 3
+/**
+ *  This is the version number macro for the current SDL_mixer version.
+ *
+ *  In versions higher than 2.9.0, the minor version overflows into
+ *  the thousands digit: for example, 2.23.0 is encoded as 4300.
+ *  This macro will not be available in SDL 3.x or SDL_mixer 3.x.
+ *
+ *  Deprecated, use SDL_MIXER_VERSION_ATLEAST or SDL_MIXER_VERSION instead.
+ */
+#define SDL_MIXER_COMPILEDVERSION \
+    SDL_VERSIONNUM(SDL_MIXER_MAJOR_VERSION, SDL_MIXER_MINOR_VERSION, SDL_MIXER_PATCHLEVEL)
+#endif /* SDL_MIXER_MAJOR_VERSION < 3 && SDL_MAJOR_VERSION < 3 */
+
+/**
+ *  This macro will evaluate to true if compiled with SDL_mixer at least X.Y.Z.
+ */
+#define SDL_MIXER_VERSION_ATLEAST(X, Y, Z) \
+    ((SDL_MIXER_MAJOR_VERSION >= X) && \
+     (SDL_MIXER_MAJOR_VERSION > X || SDL_MIXER_MINOR_VERSION >= Y) && \
+     (SDL_MIXER_MAJOR_VERSION > X || SDL_MIXER_MINOR_VERSION > Y || SDL_MIXER_PATCHLEVEL >= Z))
+
+/**
+ * Query the version of SDL_mixer that the program is linked against.
+ *
+ * This function gets the version of the dynamically linked SDL_mixer library.
+ * This is separate from the SDL_MIXER_VERSION() macro, which tells you what
+ * version of the SDL_mixer headers you compiled against.
+ *
+ * This returns static internal data; do not free or modify it!
+ *
+ * \returns a pointer to the version information.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC const SDL_version * SDLCALL Mix_Linked_Version(void);
+
+/**
+ * Initialization flags
+ */
+typedef enum
+{
+    MIX_INIT_FLAC   = 0x00000001,
+    MIX_INIT_MOD    = 0x00000002,
+    MIX_INIT_MP3    = 0x00000008,
+    MIX_INIT_OGG    = 0x00000010,
+    MIX_INIT_MID    = 0x00000020,
+    MIX_INIT_OPUS   = 0x00000040
+} MIX_InitFlags;
+
+/**
+ * Initialize SDL_mixer.
+ *
+ * This function loads dynamic libraries that SDL_mixer needs, and prepares
+ * them for use. This must be the first function you call in SDL_mixer, and if
+ * it fails you should not continue with the library.
+ *
+ * Flags should be one or more flags from MIX_InitFlags OR'd together. It
+ * returns the flags successfully initialized, or 0 on failure.
+ *
+ * Currently, these flags are:
+ *
+ * - `MIX_INIT_FLAC`
+ * - `MIX_INIT_MOD`
+ * - `MIX_INIT_MP3`
+ * - `MIX_INIT_OGG`
+ * - `MIX_INIT_MID`
+ * - `MIX_INIT_OPUS`
+ *
+ * More flags may be added in a future SDL_mixer release.
+ *
+ * This function may need to load external shared libraries to support various
+ * codecs, which means this function can fail to initialize that support on an
+ * otherwise-reasonable system if the library isn't available; this is not
+ * just a question of exceptional circumstances like running out of memory at
+ * startup!
+ *
+ * Note that you may call this function more than once to initialize with
+ * additional flags. The return value will reflect both new flags that
+ * successfully initialized, and also include flags that had previously been
+ * initialized as well.
+ *
+ * As this will return previously-initialized flags, it's legal to call this
+ * with zero (no flags set). This is a safe no-op that can be used to query
+ * the current initialization state without changing it at all.
+ *
+ * Since this returns previously-initialized flags as well as new ones, and
+ * you can call this with zero, you should not check for a zero return value
+ * to determine an error condition. Instead, you should check to make sure all
+ * the flags you require are set in the return value. If you have a game with
+ * data in a specific format, this might be a fatal error. If you're a generic
+ * media player, perhaps you are fine with only having WAV and MP3 support and
+ * can live without Opus playback, even if you request support for everything.
+ *
+ * Unlike other SDL satellite libraries, calls to Mix_Init do not stack; a
+ * single call to Mix_Quit() will deinitialize everything and does not have to
+ * be paired with a matching Mix_Init call. For that reason, it's considered
+ * best practices to have a single Mix_Init and Mix_Quit call in your program.
+ * While this isn't required, be aware of the risks of deviating from that
+ * behavior.
+ *
+ * After initializing SDL_mixer, the next step is to open an audio device to
+ * prepare to play sound (with Mix_OpenAudio() or Mix_OpenAudioDevice()), and
+ * load audio data to play with that device.
+ *
+ * \param flags initialization flags, OR'd together.
+ * \returns all currently initialized flags.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_Quit
+ */
+extern DECLSPEC int SDLCALL Mix_Init(int flags);
+
+/**
+ * Deinitialize SDL_mixer.
+ *
+ * This should be the last function you call in SDL_mixer, after freeing all
+ * other resources and closing all audio devices. This will unload any shared
+ * libraries it is using for various codecs.
+ *
+ * After this call, a call to Mix_Init(0) will return 0 (no codecs loaded).
+ *
+ * You can safely call Mix_Init() to reload various codec support after this
+ * call.
+ *
+ * Unlike other SDL satellite libraries, calls to Mix_Init do not stack; a
+ * single call to Mix_Quit() will deinitialize everything and does not have to
+ * be paired with a matching Mix_Init call. For that reason, it's considered
+ * best practices to have a single Mix_Init and Mix_Quit call in your program.
+ * While this isn't required, be aware of the risks of deviating from that
+ * behavior.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_Init
+ */
+extern DECLSPEC void SDLCALL Mix_Quit(void);
+
+
+/**
+ * The default mixer has 8 simultaneous mixing channels
+ */
+#ifndef MIX_CHANNELS
+#define MIX_CHANNELS    8
+#endif
+
+/* Good default values for a PC soundcard */
+#define MIX_DEFAULT_FREQUENCY   44100
+#if SDL_BYTEORDER == SDL_LIL_ENDIAN
+#define MIX_DEFAULT_FORMAT  AUDIO_S16LSB
+#else
+#define MIX_DEFAULT_FORMAT  AUDIO_S16MSB
+#endif
+#define MIX_DEFAULT_CHANNELS    2
+#define MIX_MAX_VOLUME          SDL_MIX_MAXVOLUME /* Volume of a chunk */
+
+/**
+ * The internal format for an audio chunk
+ */
+typedef struct Mix_Chunk {
+    int allocated;
+    Uint8 *abuf;
+    Uint32 alen;
+    Uint8 volume;       /* Per-sample volume, 0-128 */
+} Mix_Chunk;
+
+/**
+ * The different fading types supported
+ */
+typedef enum {
+    MIX_NO_FADING,
+    MIX_FADING_OUT,
+    MIX_FADING_IN
+} Mix_Fading;
+
+/**
+ * These are types of music files (not libraries used to load them)
+ */
+typedef enum {
+    MUS_NONE,
+    MUS_CMD,
+    MUS_WAV,
+    MUS_MOD,
+    MUS_MID,
+    MUS_OGG,
+    MUS_MP3,
+    MUS_MP3_MAD_UNUSED,
+    MUS_FLAC,
+    MUS_MODPLUG_UNUSED,
+    MUS_OPUS
+} Mix_MusicType;
+
+/**
+ * The internal format for a music chunk interpreted via codecs
+ */
+typedef struct _Mix_Music Mix_Music;
+
+/**
+ * Open the default audio device for playback.
+ *
+ * An audio device is what generates sound, so the app must open one to make
+ * noise.
+ *
+ * This function will check if SDL's audio system is initialized, and if not,
+ * it will initialize it by calling `SDL_Init(SDL_INIT_AUDIO)` on your behalf.
+ * You are free to (and encouraged to!) initialize it yourself before calling
+ * this function, as this gives your program more control over the process.
+ *
+ * This function might cover all of an application's needs, but for those that
+ * need more flexibility, the more powerful version of this function is
+ * Mix_OpenAudioDevice(). This function is equivalent to calling:
+ *
+ * ```c
+ * Mix_OpenAudioDevice(frequency, format, nchannels, chunksize, NULL,
+ *                     SDL_AUDIO_ALLOW_FREQUENCY_CHANGE |
+ *                     SDL_AUDIO_ALLOW_CHANNELS_CHANGE);
+ * ```
+ *
+ * If you aren't particularly concerned with the specifics of the audio
+ * device, and your data isn't in a specific format, the values you use here
+ * can just be reasonable defaults. SDL_mixer will convert audio data you feed
+ * it to the correct format on demand.
+ *
+ * That being said, if you have control of your audio data and you know its
+ * format ahead of time, you can save CPU time by opening the audio device in
+ * that exact format so SDL_mixer does not have to spend time converting
+ * anything behind the scenes, and can just pass the data straight through to
+ * the hardware. On some platforms, where the hardware only supports specific
+ * settings, you might have to be careful to make everything match, but your
+ * own data is often easier to control, so aim to open the device for what you
+ * need.
+ *
+ * The other reason to care about specific formats: if you plan to touch the
+ * mix buffer directly (with Mix_SetPostMix, a registered effect, or
+ * Mix_HookMusic), you might have code that expects it to be in a specific
+ * format, and you should specify that here.
+ *
+ * The audio device frequency is specified in Hz; in modern times, 48000 is
+ * often a reasonable default.
+ *
+ * The audio device format is one of SDL's AUDIO_* constants. AUDIO_S16SYS
+ * (16-bit audio) is probably a safe default. More modern systems may prefer
+ * AUDIO_F32SYS (32-bit floating point audio).
+ *
+ * The audio device channels are generally 1 for mono output, or 2 for stereo,
+ * but the brave can try surround sound configs with 4 (quad), 6 (5.1), 7
+ * (6.1) or 8 (7.1).
+ *
+ * The audio device's chunk size is the number of sample frames (one sample
+ * per frame for mono output, two samples per frame in a stereo setup, etc)
+ * that are fed to the device at once. The lower the number, the lower the
+ * latency, but you risk dropouts if it gets too low. 2048 is often a
+ * reasonable default, but your app might want to experiment with 1024 or
+ * 4096.
+ *
+ * You may only have one audio device open at a time; if you want to change a
+ * setting, you must close the device and reopen it, which is not something
+ * you can do seamlessly during playback.
+ *
+ * This function does not allow you to select a specific audio device on the
+ * system, it always chooses the best default it can on your behalf (which, in
+ * many cases, is exactly what you want anyhow). If you must choose a specific
+ * device, you can do so with Mix_OpenAudioDevice() instead.
+ *
+ * If this function reports success, you are ready to start making noise! Load
+ * some audio data and start playing!
+ *
+ * The app can use Mix_QuerySpec() to determine the final device settings.
+ *
+ * When done with an audio device, probably at the end of the program, the app
+ * should dispose of the device with Mix_CloseDevice().
+ *
+ * \param frequency the frequency to playback audio at (in Hz).
+ * \param format audio format, one of SDL's AUDIO_* values.
+ * \param channels number of channels (1 is mono, 2 is stereo, etc).
+ * \param chunksize audio buffer size in sample FRAMES (total samples divided
+ *                  by channel count).
+ * \returns 0 if successful, -1 on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_OpenAudioDevice
+ * \sa Mix_CloseDevice
+ */
+extern DECLSPEC int SDLCALL Mix_OpenAudio(int frequency, Uint16 format, int channels, int chunksize);
+
+
+/**
+ * Open a specific audio device for playback.
+ *
+ * (A slightly simpler version of this function is available in
+ * Mix_OpenAudio(), which still might meet most applications' needs.)
+ *
+ * An audio device is what generates sound, so the app must open one to make
+ * noise.
+ *
+ * This function will check if SDL's audio system is initialized, and if not,
+ * it will initialize it by calling `SDL_Init(SDL_INIT_AUDIO)` on your behalf.
+ * You are free to (and encouraged to!) initialize it yourself before calling
+ * this function, as this gives your program more control over the process.
+ *
+ * If you aren't particularly concerned with the specifics of the audio
+ * device, and your data isn't in a specific format, the values you use here
+ * can just be reasonable defaults. SDL_mixer will convert audio data you feed
+ * it to the correct format on demand.
+ *
+ * That being said, if you have control of your audio data and you know its
+ * format ahead of time, you can save CPU time by opening the audio device in
+ * that exact format so SDL_mixer does not have to spend time converting
+ * anything behind the scenes, and can just pass the data straight through to
+ * the hardware. On some platforms, where the hardware only supports specific
+ * settings, you might have to be careful to make everything match, but your
+ * own data is often easier to control, so aim to open the device for what you
+ * need.
+ *
+ * The other reason to care about specific formats: if you plan to touch the
+ * mix buffer directly (with Mix_SetPostMix, a registered effect, or
+ * Mix_HookMusic), you might have code that expects it to be in a specific
+ * format, and you should specify that here.
+ *
+ * The audio device frequency is specified in Hz; in modern times, 48000 is
+ * often a reasonable default.
+ *
+ * The audio device format is one of SDL's AUDIO_* constants. AUDIO_S16SYS
+ * (16-bit audio) is probably a safe default. More modern systems may prefer
+ * AUDIO_F32SYS (32-bit floating point audio).
+ *
+ * The audio device channels are generally 1 for mono output, or 2 for stereo,
+ * but the brave can try surround sound configs with 4 (quad), 6 (5.1), 7
+ * (6.1) or 8 (7.1).
+ *
+ * The audio device's chunk size is the number of sample frames (one sample
+ * per frame for mono output, two samples per frame in a stereo setup, etc)
+ * that are fed to the device at once. The lower the number, the lower the
+ * latency, but you risk dropouts if it gets too low. 2048 is often a
+ * reasonable default, but your app might want to experiment with 1024 or
+ * 4096.
+ *
+ * You may only have one audio device open at a time; if you want to change a
+ * setting, you must close the device and reopen it, which is not something
+ * you can do seamlessly during playback.
+ *
+ * This function allows you to select specific audio hardware on the system
+ * with the `device` parameter. If you specify NULL, SDL_mixer will choose the
+ * best default it can on your behalf (which, in many cases, is exactly what
+ * you want anyhow). SDL_mixer does not offer a mechanism to determine device
+ * names to open, but you can use SDL_GetNumAudioDevices() to get a count of
+ * available devices and then SDL_GetAudioDeviceName() in a loop to obtain a
+ * list. If you do this, be sure to call `SDL_Init(SDL_INIT_AUDIO)` first to
+ * initialize SDL's audio system!
+ *
+ * The `allowed_changes` parameter specifies what settings are flexible. These
+ * are the `SDL_AUDIO_ALLOW_*` flags from SDL. These tell SDL_mixer that the
+ * app doesn't mind if a specific setting changes. For example, the app might
+ * need stereo data in Sint16 format, but if the sample rate or chunk size
+ * changes, the app can handle that. In that case, the app would specify
+ * `SDL_AUDIO_ALLOW_FORMAT_CHANGE|SDL_AUDIO_ALLOW_SAMPLES_CHANGE`. In this
+ * case, if the system's hardware requires something other than the requested
+ * format, SDL_mixer can select what the hardware demands instead of the app.
+ * If the `SDL_AUDIO_ALLOW_` flag is not specified, SDL_mixer must convert
+ * data behind the scenes between what the app demands and what the hardware
+ * requires. If your app needs precisely what is requested, specify zero for
+ * `allowed_changes`.
+ *
+ * If changes were allowed, the app can use Mix_QuerySpec() to determine the
+ * final device settings.
+ *
+ * If this function reports success, you are ready to start making noise! Load
+ * some audio data and start playing!
+ *
+ * When done with an audio device, probably at the end of the program, the app
+ * should dispose of the device with Mix_CloseDevice().
+ *
+ * \param frequency the frequency to playback audio at (in Hz).
+ * \param format audio format, one of SDL's AUDIO_* values.
+ * \param channels number of channels (1 is mono, 2 is stereo, etc).
+ * \param chunksize audio buffer size in sample FRAMES (total samples divided
+ *                  by channel count).
+ * \param device the device name to open, or NULL to choose a reasonable
+ *               default.
+ * \param allowed_changes Allow change flags (see SDL_AUDIO_ALLOW_* flags)
+ * \returns 0 if successful, -1 on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.2.
+ *
+ * \sa Mix_OpenAudio
+ * \sa Mix_CloseDevice
+ * \sa Mix_QuerySpec
+ */
+extern DECLSPEC int SDLCALL Mix_OpenAudioDevice(int frequency, Uint16 format, int channels, int chunksize, const char* device, int allowed_changes);
+
+/**
+ * Find out what the actual audio device parameters are.
+ *
+ * If Mix_OpenAudioDevice() was called with `allowed_changes` set to anything
+ * but zero, or Mix_OpenAudio() was used, some audio device settings may be
+ * different from the application's request. This function will report what
+ * the device is actually running at.
+ *
+ * Note this is only important if the app intends to touch the audio buffers
+ * being sent to the hardware directly. If an app just wants to play audio
+ * files and let SDL_mixer handle the low-level details, this function can
+ * probably be ignored.
+ *
+ * If the audio device is not opened, this function will return 0.
+ *
+ * \param frequency On return, will be filled with the audio device's
+ *                  frequency in Hz.
+ * \param format On return, will be filled with the audio device's format.
+ * \param channels On return, will be filled with the audio device's channel
+ *                 count.
+ * \returns 1 if the audio device has been opened, 0 otherwise.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_OpenAudio
+ * \sa Mix_OpenAudioDevice
+ */
+extern DECLSPEC int SDLCALL Mix_QuerySpec(int *frequency, Uint16 *format, int *channels);
+
+/**
+ * Dynamically change the number of channels managed by the mixer.
+ *
+ * SDL_mixer deals with "channels," which is not the same thing as the
+ * mono/stereo channels; they might be better described as "tracks," as each
+ * one corresponds to a separate source of audio data. Three different WAV
+ * files playing at the same time would be three separate SDL_mixer channels,
+ * for example.
+ *
+ * An app needs as many channels as it has audio data it wants to play
+ * simultaneously, mixing them into a single stream to send to the audio
+ * device.
+ *
+ * SDL_mixer allocates `MIX_CHANNELS` (currently 8) channels when you open an
+ * audio device, which may be more than an app needs, but if the app needs
+ * more or wants less, this function can change it.
+ *
+ * If decreasing the number of channels, any upper channels currently playing
+ * are stopped. This will deregister all effects on those channels and call
+ * any callback specified by Mix_ChannelFinished() for each removed channel.
+ *
+ * If `numchans` is less than zero, this will return the current number of
+ * channels without changing anything.
+ *
+ * \param numchans the new number of channels, or < 0 to query current channel
+ *                 count.
+ * \returns the new number of allocated channels.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_AllocateChannels(int numchans);
+
+/**
+ * Load a supported audio format into a chunk.
+ *
+ * SDL_mixer has two separate data structures for audio data. One it calls a
+ * "chunk," which is meant to be a file completely decoded into memory up
+ * front, and the other it calls "music" which is a file intended to be
+ * decoded on demand. Originally, simple formats like uncompressed WAV files
+ * were meant to be chunks and compressed things, like MP3s, were meant to be
+ * music, and you would stream one thing for a game's music and make repeating
+ * sound effects with the chunks.
+ *
+ * In modern times, this isn't split by format anymore, and most are
+ * interchangeable, so the question is what the app thinks is worth
+ * predecoding or not. Chunks might take more memory, but once they are loaded
+ * won't need to decode again, whereas music always needs to be decoded on the
+ * fly. Also, crucially, there are as many channels for chunks as the app can
+ * allocate, but SDL_mixer only offers a single "music" channel.
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_mixer reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * There is a separate function (a macro, before SDL_mixer 2.6.0) to read
+ * files from disk without having to deal with SDL_RWops:
+ * `Mix_LoadWAV("filename.wav")` will call this function and manage those
+ * details for you.
+ *
+ * When done with a chunk, the app should dispose of it with a call to
+ * Mix_FreeChunk().
+ *
+ * \param src an SDL_RWops that data will be read from.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \returns a new chunk, or NULL on error.
+ *
+ * \since This function is available since SDL_mixer 2.6.0 (and as a macro
+ *        since 2.0.0).
+ *
+ * \sa Mix_LoadWAV
+ * \sa Mix_FreeChunk
+ */
+extern DECLSPEC Mix_Chunk * SDLCALL Mix_LoadWAV_RW(SDL_RWops *src, int freesrc);
+
+/**
+ * Load a supported audio format into a chunk.
+ *
+ * SDL_mixer has two separate data structures for audio data. One it calls a
+ * "chunk," which is meant to be a file completely decoded into memory up
+ * front, and the other it calls "music" which is a file intended to be
+ * decoded on demand. Originally, simple formats like uncompressed WAV files
+ * were meant to be chunks and compressed things, like MP3s, were meant to be
+ * music, and you would stream one thing for a game's music and make repeating
+ * sound effects with the chunks.
+ *
+ * In modern times, this isn't split by format anymore, and most are
+ * interchangeable, so the question is what the app thinks is worth
+ * predecoding or not. Chunks might take more memory, but once they are loaded
+ * won't need to decode again, whereas music always needs to be decoded on the
+ * fly. Also, crucially, there are as many channels for chunks as the app can
+ * allocate, but SDL_mixer only offers a single "music" channel.
+ *
+ * If you would rather use the abstract SDL_RWops interface to load data from
+ * somewhere other than the filesystem, you can use Mix_LoadWAV_RW() instead.
+ *
+ * When done with a chunk, the app should dispose of it with a call to
+ * Mix_FreeChunk().
+ *
+ * Note that before SDL_mixer 2.6.0, this function was a macro that called
+ * Mix_LoadWAV_RW(), creating a RWops and setting `freesrc` to 1. This macro
+ * has since been promoted to a proper API function. Older binaries linked
+ * against a newer SDL_mixer will still call Mix_LoadWAV_RW directly, as they
+ * are using the macro, which was available since the dawn of time.
+ *
+ * \param file the filesystem path to load data from.
+ * \returns a new chunk, or NULL on error.
+ *
+ * \since This function is available since SDL_mixer 2.6.0 (and as a macro
+ *        since 2.0.0).
+ *
+ * \sa Mix_LoadWAV_RW
+ * \sa Mix_FreeChunk
+ */
+extern DECLSPEC Mix_Chunk * SDLCALL Mix_LoadWAV(const char *file);
+
+
+/**
+ * Load a supported audio format into a music object.
+ *
+ * SDL_mixer has two separate data structures for audio data. One it calls a
+ * "chunk," which is meant to be a file completely decoded into memory up
+ * front, and the other it calls "music" which is a file intended to be
+ * decoded on demand. Originally, simple formats like uncompressed WAV files
+ * were meant to be chunks and compressed things, like MP3s, were meant to be
+ * music, and you would stream one thing for a game's music and make repeating
+ * sound effects with the chunks.
+ *
+ * In modern times, this isn't split by format anymore, and most are
+ * interchangeable, so the question is what the app thinks is worth
+ * predecoding or not. Chunks might take more memory, but once they are loaded
+ * won't need to decode again, whereas music always needs to be decoded on the
+ * fly. Also, crucially, there are as many channels for chunks as the app can
+ * allocate, but SDL_mixer only offers a single "music" channel.
+ *
+ * When done with this music, the app should dispose of it with a call to
+ * Mix_FreeMusic().
+ *
+ * \param file a file path from where to load music data.
+ * \returns a new music object, or NULL on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_FreeMusic
+ */
+extern DECLSPEC Mix_Music * SDLCALL Mix_LoadMUS(const char *file);
+
+/**
+ * Load a supported audio format into a music object.
+ *
+ * SDL_mixer has two separate data structures for audio data. One it calls a
+ * "chunk," which is meant to be a file completely decoded into memory up
+ * front, and the other it calls "music" which is a file intended to be
+ * decoded on demand. Originally, simple formats like uncompressed WAV files
+ * were meant to be chunks and compressed things, like MP3s, were meant to be
+ * music, and you would stream one thing for a game's music and make repeating
+ * sound effects with the chunks.
+ *
+ * In modern times, this isn't split by format anymore, and most are
+ * interchangeable, so the question is what the app thinks is worth
+ * predecoding or not. Chunks might take more memory, but once they are loaded
+ * won't need to decode again, whereas music always needs to be decoded on the
+ * fly. Also, crucially, there are as many channels for chunks as the app can
+ * allocate, but SDL_mixer only offers a single "music" channel.
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_mixer reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * As a convenience, there is a function to read files from disk without
+ * having to deal with SDL_RWops: `Mix_LoadMUS("filename.mp3")` will manage
+ * those details for you.
+ *
+ * This function attempts to guess the file format from incoming data. If the
+ * caller knows the format, or wants to force it, it should use
+ * Mix_LoadMUSType_RW() instead.
+ *
+ * When done with this music, the app should dispose of it with a call to
+ * Mix_FreeMusic().
+ *
+ * \param src an SDL_RWops that data will be read from.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \returns a new music object, or NULL on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_FreeMusic
+ */
+extern DECLSPEC Mix_Music * SDLCALL Mix_LoadMUS_RW(SDL_RWops *src, int freesrc);
+
+/**
+ * Load an audio format into a music object, assuming a specific format.
+ *
+ * SDL_mixer has two separate data structures for audio data. One it calls a
+ * "chunk," which is meant to be a file completely decoded into memory up
+ * front, and the other it calls "music" which is a file intended to be
+ * decoded on demand. Originally, simple formats like uncompressed WAV files
+ * were meant to be chunks and compressed things, like MP3s, were meant to be
+ * music, and you would stream one thing for a game's music and make repeating
+ * sound effects with the chunks.
+ *
+ * In modern times, this isn't split by format anymore, and most are
+ * interchangeable, so the question is what the app thinks is worth
+ * predecoding or not. Chunks might take more memory, but once they are loaded
+ * won't need to decode again, whereas music always needs to be decoded on the
+ * fly. Also, crucially, there are as many channels for chunks as the app can
+ * allocate, but SDL_mixer only offers a single "music" channel.
+ *
+ * This function loads music data, and lets the application specify the type
+ * of music being loaded, which might be useful if SDL_mixer cannot figure it
+ * out from the data stream itself.
+ *
+ * Currently, the following types are supported:
+ *
+ * - `MUS_NONE` (SDL_mixer should guess, based on the data)
+ * - `MUS_WAV` (Microsoft WAV files)
+ * - `MUS_MOD` (Various tracker formats)
+ * - `MUS_MID` (MIDI files)
+ * - `MUS_OGG` (Ogg Vorbis files)
+ * - `MUS_MP3` (MP3 files)
+ * - `MUS_FLAC` (FLAC files)
+ * - `MUS_OPUS` (Opus files)
+ *
+ * If `freesrc` is non-zero, the RWops will be closed before returning,
+ * whether this function succeeds or not. SDL_mixer reads everything it needs
+ * from the RWops during this call in any case.
+ *
+ * As a convenience, there is a function to read files from disk without
+ * having to deal with SDL_RWops: `Mix_LoadMUS("filename.mp3")` will manage
+ * those details for you (but not let you specify the music type explicitly)..
+ *
+ * When done with this music, the app should dispose of it with a call to
+ * Mix_FreeMusic().
+ *
+ * \param src an SDL_RWops that data will be read from.
+ * \param type the type of audio data provided by `src`.
+ * \param freesrc non-zero to close/free the SDL_RWops before returning, zero
+ *                to leave it open.
+ * \returns a new music object, or NULL on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_FreeMusic
+ */
+extern DECLSPEC Mix_Music * SDLCALL Mix_LoadMUSType_RW(SDL_RWops *src, Mix_MusicType type, int freesrc);
+
+/**
+ * Load a WAV file from memory as quickly as possible.
+ *
+ * Unlike Mix_LoadWAV_RW, this function has several requirements, and unless
+ * you control all your audio data and know what you're doing, you should
+ * consider this function unsafe and not use it.
+ *
+ * - The provided audio data MUST be in Microsoft WAV format.
+ * - The provided audio data shouldn't use any strange WAV extensions.
+ * - The audio data MUST be in the exact same format as the audio device. This
+ *   function will not attempt to convert it, or even verify it's in the right
+ *   format.
+ * - The audio data must be valid; this function does not know the size of the
+ *   memory buffer, so if the WAV data is corrupted, it can read past the end
+ *   of the buffer, causing a crash.
+ * - The audio data must live at least as long as the returned Mix_Chunk,
+ *   because SDL_mixer will use that data directly and not make a copy of it.
+ *
+ * This function will do NO error checking! Be extremely careful here!
+ *
+ * (Seriously, use Mix_LoadWAV_RW instead.)
+ *
+ * If this function is successful, the provided memory buffer must remain
+ * available until Mix_FreeChunk() is called on the returned chunk.
+ *
+ * \param mem memory buffer containing of a WAV file.
+ * \returns a new chunk, or NULL on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_LoadWAV_RW
+ * \sa Mix_FreeChunk
+ */
+extern DECLSPEC Mix_Chunk * SDLCALL Mix_QuickLoad_WAV(Uint8 *mem);
+
+/**
+ * Load a raw audio data from memory as quickly as possible.
+ *
+ * The audio data MUST be in the exact same format as the audio device. This
+ * function will not attempt to convert it, or even verify it's in the right
+ * format.
+ *
+ * If this function is successful, the provided memory buffer must remain
+ * available until Mix_FreeChunk() is called on the returned chunk.
+ *
+ * \param mem memory buffer containing raw PCM data.
+ * \param len length of buffer pointed to by `mem`, in bytes.
+ * \returns a new chunk, or NULL on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_FreeChunk
+ */
+extern DECLSPEC Mix_Chunk * SDLCALL Mix_QuickLoad_RAW(Uint8 *mem, Uint32 len);
+
+/**
+ * Free an audio chunk.
+ *
+ * An app should call this function when it is done with a Mix_Chunk and wants
+ * to dispose of its resources.
+ *
+ * SDL_mixer will stop any channels this chunk is currently playing on. This
+ * will deregister all effects on those channels and call any callback
+ * specified by Mix_ChannelFinished() for each removed channel.
+ *
+ * \param chunk the chunk to free.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_LoadWAV
+ * \sa Mix_LoadWAV_RW
+ * \sa Mix_QuickLoad_WAV
+ * \sa Mix_QuickLoad_RAW
+ */
+extern DECLSPEC void SDLCALL Mix_FreeChunk(Mix_Chunk *chunk);
+
+/**
+ * Free a music object.
+ *
+ * If this music is currently playing, it will be stopped.
+ *
+ * If this music is in the process of fading out (via Mix_FadeOutMusic()),
+ * this function will *block* until the fade completes. If you need to avoid
+ * this, be sure to call Mix_HaltMusic() before freeing the music.
+ *
+ * \param music the music object to free.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_LoadMUS
+ * \sa Mix_LoadMUS_RW
+ * \sa Mix_LoadMUSType_RW
+ */
+extern DECLSPEC void SDLCALL Mix_FreeMusic(Mix_Music *music);
+
+/**
+ * Get a list of chunk decoders that this build of SDL_mixer provides.
+ *
+ * This list can change between builds AND runs of the program, if external
+ * libraries that add functionality become available. You must successfully
+ * call Mix_OpenAudio() or Mix_OpenAudioDevice() before calling this function,
+ * as decoders are activated at device open time.
+ *
+ * Appearing in this list doesn't promise your specific audio file will
+ * decode...but it's handy to know if you have, say, a functioning Ogg Vorbis
+ * install.
+ *
+ * These return values are static, read-only data; do not modify or free it.
+ * The pointers remain valid until you call Mix_CloseAudio().
+ *
+ * \returns number of chunk decoders available.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_GetChunkDecoder
+ * \sa Mix_HasChunkDecoder
+ */
+extern DECLSPEC int SDLCALL Mix_GetNumChunkDecoders(void);
+
+/**
+ * Get a chunk decoder's name.
+ *
+ * The requested decoder's index must be between zero and
+ * Mix_GetNumChunkDecoders()-1. It's safe to call this with an invalid index;
+ * this function will return NULL in that case.
+ *
+ * This list can change between builds AND runs of the program, if external
+ * libraries that add functionality become available. You must successfully
+ * call Mix_OpenAudio() or Mix_OpenAudioDevice() before calling this function,
+ * as decoders are activated at device open time.
+ *
+ * \param index index of the chunk decoder.
+ * \returns the chunk decoder's name.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_GetNumChunkDecoders
+ */
+extern DECLSPEC const char * SDLCALL Mix_GetChunkDecoder(int index);
+
+/**
+ * Check if a chunk decoder is available by name.
+ *
+ * This result can change between builds AND runs of the program, if external
+ * libraries that add functionality become available. You must successfully
+ * call Mix_OpenAudio() or Mix_OpenAudioDevice() before calling this function,
+ * as decoders are activated at device open time.
+ *
+ * Decoder names are arbitrary but also obvious, so you have to know what
+ * you're looking for ahead of time, but usually it's the file extension in
+ * capital letters (some example names are "AIFF", "VOC", "WAV").
+ *
+ * \param name the decoder name to query.
+ * \returns SDL_TRUE if a decoder by that name is available, SDL_FALSE
+ *          otherwise.
+ *
+ * \since This function is available since SDL_mixer 2.0.2.
+ *
+ * \sa Mix_GetNumChunkDecoders
+ * \sa Mix_GetChunkDecoder
+ */
+extern DECLSPEC SDL_bool SDLCALL Mix_HasChunkDecoder(const char *name);
+
+/**
+ * Get a list of music decoders that this build of SDL_mixer provides.
+ *
+ * This list can change between builds AND runs of the program, if external
+ * libraries that add functionality become available. You must successfully
+ * call Mix_OpenAudio() or Mix_OpenAudioDevice() before calling this function,
+ * as decoders are activated at device open time.
+ *
+ * Appearing in this list doesn't promise your specific audio file will
+ * decode...but it's handy to know if you have, say, a functioning Ogg Vorbis
+ * install.
+ *
+ * These return values are static, read-only data; do not modify or free it.
+ * The pointers remain valid until you call Mix_CloseAudio().
+ *
+ * \returns number of chunk decoders available.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_GetMusicDecoder
+ * \sa Mix_HasMusicDecoder
+ */
+extern DECLSPEC int SDLCALL Mix_GetNumMusicDecoders(void);
+
+/**
+ * Get a music decoder's name.
+ *
+ * The requested decoder's index must be between zero and
+ * Mix_GetNumMusicDecoders()-1. It's safe to call this with an invalid index;
+ * this function will return NULL in that case.
+ *
+ * This list can change between builds AND runs of the program, if external
+ * libraries that add functionality become available. You must successfully
+ * call Mix_OpenAudio() or Mix_OpenAudioDevice() before calling this function,
+ * as decoders are activated at device open time.
+ *
+ * \param index index of the music decoder.
+ * \returns the music decoder's name.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_GetNumMusicDecoders
+ */
+extern DECLSPEC const char * SDLCALL Mix_GetMusicDecoder(int index);
+
+/**
+ * Check if a music decoder is available by name.
+ *
+ * This result can change between builds AND runs of the program, if external
+ * libraries that add functionality become available. You must successfully
+ * call Mix_OpenAudio() or Mix_OpenAudioDevice() before calling this function,
+ * as decoders are activated at device open time.
+ *
+ * Decoder names are arbitrary but also obvious, so you have to know what
+ * you're looking for ahead of time, but usually it's the file extension in
+ * capital letters (some example names are "MOD", "MP3", "FLAC").
+ *
+ * \param name the decoder name to query.
+ * \returns SDL_TRUE if a decoder by that name is available, SDL_FALSE
+ *          otherwise.
+ *
+ * \since This function is available since SDL_mixer 2.6.0
+ *
+ * \sa Mix_GetNumMusicDecoders
+ * \sa Mix_GetMusicDecoder
+ */
+extern DECLSPEC SDL_bool SDLCALL Mix_HasMusicDecoder(const char *name);
+
+/**
+ * Find out the format of a mixer music.
+ *
+ * If `music` is NULL, this will query the currently playing music (and return
+ * MUS_NONE if nothing is currently playing).
+ *
+ * \param music the music object to query, or NULL for the currently-playing
+ *              music.
+ * \returns the Mix_MusicType for the music object.
+ *
+ * \since This function is available since SDL_mixer 2.0.0
+ */
+extern DECLSPEC Mix_MusicType SDLCALL Mix_GetMusicType(const Mix_Music *music);
+
+/**
+ * Get the title for a music object, or its filename.
+ *
+ * This returns format-specific metadata. Not all file formats supply this!
+ *
+ * If `music` is NULL, this will query the currently-playing music.
+ *
+ * If music's title tag is missing or empty, the filename will be returned. If
+ * you'd rather have the actual metadata or nothing, use
+ * Mix_GetMusicTitleTag() instead.
+ *
+ * Please note that if the music was loaded from an SDL_RWops instead of a
+ * filename, the filename returned will be an empty string ("").
+ *
+ * This function never returns NULL! If no data is available, it will return
+ * an empty string ("").
+ *
+ * \param music the music object to query, or NULL for the currently-playing
+ *              music.
+ * \returns the music's title if available, or the filename if not, or "".
+ *
+ * \since This function is available since SDL_mixer 2.6.0.
+ *
+ * \sa Mix_GetMusicTitleTag
+ * \sa Mix_GetMusicArtistTag
+ * \sa Mix_GetMusicAlbumTag
+ * \sa Mix_GetMusicCopyrightTag
+ */
+extern DECLSPEC const char *SDLCALL Mix_GetMusicTitle(const Mix_Music *music);
+
+/**
+ * Get the title for a music object.
+ *
+ * This returns format-specific metadata. Not all file formats supply this!
+ *
+ * If `music` is NULL, this will query the currently-playing music.
+ *
+ * Unlike this function, Mix_GetMusicTitle() produce a string with the music's
+ * filename if a title isn't available, which might be preferable for some
+ * applications.
+ *
+ * This function never returns NULL! If no data is available, it will return
+ * an empty string ("").
+ *
+ * \param music the music object to query, or NULL for the currently-playing
+ *              music.
+ * \returns the music's title if available, or "".
+ *
+ * \since This function is available since SDL_mixer 2.6.0.
+ *
+ * \sa Mix_GetMusicTitle
+ * \sa Mix_GetMusicArtistTag
+ * \sa Mix_GetMusicAlbumTag
+ * \sa Mix_GetMusicCopyrightTag
+ */
+extern DECLSPEC const char *SDLCALL Mix_GetMusicTitleTag(const Mix_Music *music);
+
+/**
+ * Get the artist name for a music object.
+ *
+ * This returns format-specific metadata. Not all file formats supply this!
+ *
+ * If `music` is NULL, this will query the currently-playing music.
+ *
+ * This function never returns NULL! If no data is available, it will return
+ * an empty string ("").
+ *
+ * \param music the music object to query, or NULL for the currently-playing
+ *              music.
+ * \returns the music's artist name if available, or "".
+ *
+ * \since This function is available since SDL_mixer 2.6.0.
+ *
+ * \sa Mix_GetMusicTitleTag
+ * \sa Mix_GetMusicAlbumTag
+ * \sa Mix_GetMusicCopyrightTag
+ */
+extern DECLSPEC const char *SDLCALL Mix_GetMusicArtistTag(const Mix_Music *music);
+
+/**
+ * Get the album name for a music object.
+ *
+ * This returns format-specific metadata. Not all file formats supply this!
+ *
+ * If `music` is NULL, this will query the currently-playing music.
+ *
+ * This function never returns NULL! If no data is available, it will return
+ * an empty string ("").
+ *
+ * \param music the music object to query, or NULL for the currently-playing
+ *              music.
+ * \returns the music's album name if available, or "".
+ *
+ * \since This function is available since SDL_mixer 2.6.0.
+ *
+ * \sa Mix_GetMusicTitleTag
+ * \sa Mix_GetMusicArtistTag
+ * \sa Mix_GetMusicCopyrightTag
+ */
+extern DECLSPEC const char *SDLCALL Mix_GetMusicAlbumTag(const Mix_Music *music);
+
+/**
+ * Get the copyright text for a music object.
+ *
+ * This returns format-specific metadata. Not all file formats supply this!
+ *
+ * If `music` is NULL, this will query the currently-playing music.
+ *
+ * This function never returns NULL! If no data is available, it will return
+ * an empty string ("").
+ *
+ * \param music the music object to query, or NULL for the currently-playing
+ *              music.
+ * \returns the music's copyright text if available, or "".
+ *
+ * \since This function is available since SDL_mixer 2.6.0.
+ *
+ * \sa Mix_GetMusicTitleTag
+ * \sa Mix_GetMusicArtistTag
+ * \sa Mix_GetMusicAlbumTag
+ */
+extern DECLSPEC const char *SDLCALL Mix_GetMusicCopyrightTag(const Mix_Music *music);
+
+/**
+ * Set a function that is called after all mixing is performed.
+ *
+ * This can be used to provide real-time visual display of the audio stream or
+ * add a custom mixer filter for the stream data.
+ *
+ * The callback will fire every time SDL_mixer is ready to supply more data to
+ * the audio device, after it has finished all its mixing work. This runs
+ * inside an SDL audio callback, so it's important that the callback return
+ * quickly, or there could be problems in the audio playback.
+ *
+ * The data provided to the callback is in the format that the audio device
+ * was opened in, and it represents the exact waveform SDL_mixer has mixed
+ * from all playing chunks and music for playback. You are allowed to modify
+ * the data, but it cannot be resized (so you can't add a reverb effect that
+ * goes past the end of the buffer without saving some state between runs to
+ * add it into the next callback, or resample the buffer to a smaller size to
+ * speed it up, etc).
+ *
+ * The `arg` pointer supplied here is passed to the callback as-is, for
+ * whatever the callback might want to do with it (keep track of some ongoing
+ * state, settings, etc).
+ *
+ * Passing a NULL callback disables the post-mix callback until such a time as
+ * a new one callback is set.
+ *
+ * There is only one callback available. If you need to mix multiple inputs,
+ * be prepared to handle them from a single function.
+ *
+ * \param mix_func the callback function to become the new post-mix callback.
+ * \param arg a pointer that is passed, untouched, to the callback.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_HookMusic
+ */
+extern DECLSPEC void SDLCALL Mix_SetPostMix(void (SDLCALL *mix_func)(void *udata, Uint8 *stream, int len), void *arg);
+
+/**
+ * Add your own music player or additional mixer function.
+ *
+ * This works something like Mix_SetPostMix(), but it has some crucial
+ * differences. Note that an app can use this _and_ Mix_SetPostMix() at the
+ * same time. This allows an app to replace the built-in music playback,
+ * either with it's own music decoder or with some sort of
+ * procedurally-generated audio output.
+ *
+ * The supplied callback will fire every time SDL_mixer is preparing to supply
+ * more data to the audio device. This runs inside an SDL audio callback, so
+ * it's important that the callback return quickly, or there could be problems
+ * in the audio playback.
+ *
+ * Running this callback is the first thing SDL_mixer will do when starting to
+ * mix more audio. The buffer will contain silence upon entry, so the callback
+ * does not need to mix into existing data or initialize the buffer.
+ *
+ * Note that while a callback is set through this function, SDL_mixer will not
+ * mix any playing music; this callback is used instead. To disable this
+ * callback (and thus reenable built-in music playback) call this function
+ * with a NULL callback.
+ *
+ * The data written to by the callback is in the format that the audio device
+ * was opened in, and upon return from the callback, SDL_mixer will mix any
+ * playing chunks (but not music!) into the buffer. The callback cannot resize
+ * the buffer (so you must be prepared to provide exactly the amount of data
+ * demanded or leave it as silence).
+ *
+ * The `arg` pointer supplied here is passed to the callback as-is, for
+ * whatever the callback might want to do with it (keep track of some ongoing
+ * state, settings, etc).
+ *
+ * As there is only one music "channel" mixed, there is only one callback
+ * available. If you need to mix multiple inputs, be prepared to handle them
+ * from a single function.
+ *
+ * \param mix_func the callback function to become the new post-mix callback.
+ * \param arg a pointer that is passed, untouched, to the callback.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_SetPostMix
+ */
+extern DECLSPEC void SDLCALL Mix_HookMusic(void (SDLCALL *mix_func)(void *udata, Uint8 *stream, int len), void *arg);
+
+/**
+ * Set a callback that runs when a music object has stopped playing.
+ *
+ * This callback will fire when the currently-playing music has completed, or
+ * when it has been explicitly stopped from a call to Mix_HaltMusic. As such,
+ * this callback might fire from an arbitrary background thread at almost any
+ * time; try to limit what you do here.
+ *
+ * It is legal to start a new music object playing in this callback (or
+ * restart the one that just stopped). If the music finished normally, this
+ * can be used to loop the music without a gap in the audio playback.
+ *
+ * Do not call SDL_LockAudio() from this callback; you will either be inside
+ * the audio callback, or SDL_mixer will explicitly lock the audio before
+ * calling your callback.
+ *
+ * A NULL pointer will disable the callback.
+ *
+ * \param music_finished the callback function to become the new notification
+ *                       mechanism.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC void SDLCALL Mix_HookMusicFinished(void (SDLCALL *music_finished)(void));
+
+/**
+ * Get a pointer to the user data for the current music hook.
+ *
+ * This returns the `arg` pointer last passed to Mix_HookMusic(), or NULL if
+ * that function has never been called.
+ *
+ * \returns pointer to the user data previously passed to Mix_HookMusic.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC void * SDLCALL Mix_GetMusicHookData(void);
+
+/**
+ * Set a callback that runs when a channel has finished playing.
+ *
+ * The callback may be called from the mixer's audio callback or it could be
+ * called as a result of Mix_HaltChannel(), etc.
+ *
+ * The callback has a single parameter, `channel`, which says what mixer
+ * channel has just stopped.
+ *
+ * Do not call SDL_LockAudio() from this callback; you will either be inside
+ * the audio callback, or SDL_mixer will explicitly lock the audio before
+ * calling your callback.
+ *
+ * A NULL pointer will disable the callback.
+ *
+ * \param channel_finished the callback function to become the new
+ *                         notification mechanism.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC void SDLCALL Mix_ChannelFinished(void (SDLCALL *channel_finished)(int channel));
+
+
+#define MIX_CHANNEL_POST  (-2)
+
+/**
+ * This is the format of a special effect callback:
+ *
+ *   myeffect(int chan, void *stream, int len, void *udata);
+ *
+ * (chan) is the channel number that your effect is affecting. (stream) is
+ *  the buffer of data to work upon. (len) is the size of (stream), and
+ *  (udata) is a user-defined bit of data, which you pass as the last arg of
+ *  Mix_RegisterEffect(), and is passed back unmolested to your callback.
+ *  Your effect changes the contents of (stream) based on whatever parameters
+ *  are significant, or just leaves it be, if you prefer. You can do whatever
+ *  you like to the buffer, though, and it will continue in its changed state
+ *  down the mixing pipeline, through any other effect functions, then finally
+ *  to be mixed with the rest of the channels and music for the final output
+ *  stream.
+ *
+ * DO NOT EVER call SDL_LockAudio() from your callback function!
+ */
+typedef void (SDLCALL *Mix_EffectFunc_t)(int chan, void *stream, int len, void *udata);
+
+/**
+ * This is a callback that signifies that a channel has finished all its
+ *  loops and has completed playback. This gets called if the buffer
+ *  plays out normally, or if you call Mix_HaltChannel(), implicitly stop
+ *  a channel via Mix_AllocateChannels(), or unregister a callback while
+ *  it's still playing.
+ *
+ * DO NOT EVER call SDL_LockAudio() from your callback function!
+ */
+typedef void (SDLCALL *Mix_EffectDone_t)(int chan, void *udata);
+
+
+/**
+ * Register a special effect function.
+ *
+ * At mixing time, the channel data is copied into a buffer and passed through
+ * each registered effect function. After it passes through all the functions,
+ * it is mixed into the final output stream. The copy to buffer is performed
+ * once, then each effect function performs on the output of the previous
+ * effect. Understand that this extra copy to a buffer is not performed if
+ * there are no effects registered for a given chunk, which saves CPU cycles,
+ * and any given effect will be extra cycles, too, so it is crucial that your
+ * code run fast. Also note that the data that your function is given is in
+ * the format of the sound device, and not the format you gave to
+ * Mix_OpenAudio(), although they may in reality be the same. This is an
+ * unfortunate but necessary speed concern. Use Mix_QuerySpec() to determine
+ * if you can handle the data before you register your effect, and take
+ * appropriate actions.
+ *
+ * You may also specify a callback (Mix_EffectDone_t) that is called when the
+ * channel finishes playing. This gives you a more fine-grained control than
+ * Mix_ChannelFinished(), in case you need to free effect-specific resources,
+ * etc. If you don't need this, you can specify NULL.
+ *
+ * You may set the callbacks before or after calling Mix_PlayChannel().
+ *
+ * Things like Mix_SetPanning() are just internal special effect functions, so
+ * if you are using that, you've already incurred the overhead of a copy to a
+ * separate buffer, and that these effects will be in the queue with any
+ * functions you've registered. The list of registered effects for a channel
+ * is reset when a chunk finishes playing, so you need to explicitly set them
+ * with each call to Mix_PlayChannel*().
+ *
+ * You may also register a special effect function that is to be run after
+ * final mixing occurs. The rules for these callbacks are identical to those
+ * in Mix_RegisterEffect, but they are run after all the channels and the
+ * music have been mixed into a single stream, whereas channel-specific
+ * effects run on a given channel before any other mixing occurs. These global
+ * effect callbacks are call "posteffects". Posteffects only have their
+ * Mix_EffectDone_t function called when they are unregistered (since the main
+ * output stream is never "done" in the same sense as a channel). You must
+ * unregister them manually when you've had enough. Your callback will be told
+ * that the channel being mixed is `MIX_CHANNEL_POST` if the processing is
+ * considered a posteffect.
+ *
+ * After all these effects have finished processing, the callback registered
+ * through Mix_SetPostMix() runs, and then the stream goes to the audio
+ * device.
+ *
+ * DO NOT EVER call SDL_LockAudio() from your callback function! You are
+ * already running in the audio thread and the lock is already held!
+ *
+ * Note that unlike most SDL and SDL_mixer functions, this function returns
+ * zero if there's an error, not on success. We apologize for the API design
+ * inconsistency here.
+ *
+ * \param chan the channel to register an effect to, or MIX_CHANNEL_POST.
+ * \param f effect the callback to run when more of this channel is to be
+ *          mixed.
+ * \param d effect done callback
+ * \param arg argument
+ * \returns zero if error (no such channel), nonzero if added. Error messages
+ *          can be retrieved from Mix_GetError().
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_RegisterEffect(int chan, Mix_EffectFunc_t f, Mix_EffectDone_t d, void *arg);
+
+
+/**
+ * Explicitly unregister a special effect function.
+ *
+ * You may not need to call this at all, unless you need to stop an effect
+ * from processing in the middle of a chunk's playback.
+ *
+ * Posteffects are never implicitly unregistered as they are for channels (as
+ * the output stream does not have an end), but they may be explicitly
+ * unregistered through this function by specifying MIX_CHANNEL_POST for a
+ * channel.
+ *
+ * Note that unlike most SDL and SDL_mixer functions, this function returns
+ * zero if there's an error, not on success. We apologize for the API design
+ * inconsistency here.
+ *
+ * \param chan the channel to unregister an effect on, or MIX_CHANNEL_POST.
+ * \param f effect the callback stop calling in future mixing iterations.
+ * \returns zero if error (no such channel or effect), nonzero if removed.
+ *          Error messages can be retrieved from Mix_GetError().
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_UnregisterEffect(int channel, Mix_EffectFunc_t f);
+
+/**
+ * Explicitly unregister all special effect functions.
+ *
+ * You may not need to call this at all, unless you need to stop all effects
+ * from processing in the middle of a chunk's playback.
+ *
+ * Note that this will also shut off some internal effect processing, since
+ * Mix_SetPanning() and others may use this API under the hood. This is called
+ * internally when a channel completes playback. Posteffects are never
+ * implicitly unregistered as they are for channels, but they may be
+ * explicitly unregistered through this function by specifying
+ * MIX_CHANNEL_POST for a channel.
+ *
+ * Note that unlike most SDL and SDL_mixer functions, this function returns
+ * zero if there's an error, not on success. We apologize for the API design
+ * inconsistency here.
+ *
+ * \param chan the channel to unregister all effects on, or MIX_CHANNEL_POST.
+ * \returns zero if error (no such channel), nonzero if all effects removed.
+ *          Error messages can be retrieved from Mix_GetError().
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_UnregisterAllEffects(int channel);
+
+
+#define MIX_EFFECTSMAXSPEED  "MIX_EFFECTSMAXSPEED"
+
+/*
+ * These are the internally-defined mixing effects. They use the same API that
+ *  effects defined in the application use, but are provided here as a
+ *  convenience. Some effects can reduce their quality or use more memory in
+ *  the name of speed; to enable this, make sure the environment variable
+ *  MIX_EFFECTSMAXSPEED (see above) is defined before you call
+ *  Mix_OpenAudio().
+ */
+
+
+/**
+ * Set the panning of a channel.
+ *
+ * The left and right channels are specified as integers between 0 and 255,
+ * quietest to loudest, respectively.
+ *
+ * Technically, this is just individual volume control for a sample with two
+ * (stereo) channels, so it can be used for more than just panning. If you
+ * want real panning, call it like this:
+ *
+ * ```c
+ * Mix_SetPanning(channel, left, 255 - left);
+ * ```
+ *
+ * Setting `channel` to MIX_CHANNEL_POST registers this as a posteffect, and
+ * the panning will be done to the final mixed stream before passing it on to
+ * the audio device.
+ *
+ * This uses the Mix_RegisterEffect() API internally, and returns without
+ * registering the effect function if the audio device is not configured for
+ * stereo output. Setting both `left` and `right` to 255 causes this effect to
+ * be unregistered, since that is the data's normal state.
+ *
+ * Note that an audio device in mono mode is a no-op, but this call will
+ * return successful in that case. Error messages can be retrieved from
+ * Mix_GetError().
+ *
+ * Note that unlike most SDL and SDL_mixer functions, this function returns
+ * zero if there's an error, not on success. We apologize for the API design
+ * inconsistency here.
+ *
+ * \param channel The mixer channel to pan or MIX_CHANNEL_POST.
+ * \param left Volume of stereo left channel, 0 is silence, 255 is full
+ *             volume.
+ * \param right Volume of stereo right channel, 0 is silence, 255 is full
+ *              volume.
+ * \returns zero if error (no such channel or Mix_RegisterEffect() fails),
+ *          nonzero if panning effect enabled.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_SetPosition
+ * \sa Mix_SetDistance
+ */
+extern DECLSPEC int SDLCALL Mix_SetPanning(int channel, Uint8 left, Uint8 right);
+
+
+/**
+ * Set the position of a channel.
+ *
+ * `angle` is an integer from 0 to 360, that specifies the location of the
+ * sound in relation to the listener. `angle` will be reduced as neccesary
+ * (540 becomes 180 degrees, -100 becomes 260). Angle 0 is due north, and
+ * rotates clockwise as the value increases. For efficiency, the precision of
+ * this effect may be limited (angles 1 through 7 might all produce the same
+ * effect, 8 through 15 are equal, etc). `distance` is an integer between 0
+ * and 255 that specifies the space between the sound and the listener. The
+ * larger the number, the further away the sound is. Using 255 does not
+ * guarantee that the channel will be removed from the mixing process or be
+ * completely silent. For efficiency, the precision of this effect may be
+ * limited (distance 0 through 5 might all produce the same effect, 6 through
+ * 10 are equal, etc). Setting `angle` and `distance` to 0 unregisters this
+ * effect, since the data would be unchanged.
+ *
+ * If you need more precise positional audio, consider using OpenAL for
+ * spatialized effects instead of SDL_mixer. This is only meant to be a basic
+ * effect for simple "3D" games.
+ *
+ * If the audio device is configured for mono output, then you won't get any
+ * effectiveness from the angle; however, distance attenuation on the channel
+ * will still occur. While this effect will function with stereo voices, it
+ * makes more sense to use voices with only one channel of sound, so when they
+ * are mixed through this effect, the positioning will sound correct. You can
+ * convert them to mono through SDL before giving them to the mixer in the
+ * first place if you like.
+ *
+ * Setting the channel to MIX_CHANNEL_POST registers this as a posteffect, and
+ * the positioning will be done to the final mixed stream before passing it on
+ * to the audio device.
+ *
+ * This is a convenience wrapper over Mix_SetDistance() and Mix_SetPanning().
+ *
+ * Note that unlike most SDL and SDL_mixer functions, this function returns
+ * zero if there's an error, not on success. We apologize for the API design
+ * inconsistency here.
+ *
+ * \param channel The mixer channel to position, or MIX_CHANNEL_POST.
+ * \param angle angle, in degrees. North is 0, and goes clockwise.
+ * \param distance distance; 0 is the listener, 255 is maxiumum distance away.
+ * \returns zero if error (no such channel or Mix_RegisterEffect() fails),
+ *          nonzero if position effect is enabled. Error messages can be
+ *          retrieved from Mix_GetError().
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_SetPosition(int channel, Sint16 angle, Uint8 distance);
+
+
+/**
+ * Set the "distance" of a channel.
+ *
+ * `distance` is an integer from 0 to 255 that specifies the location of the
+ * sound in relation to the listener. Distance 0 is overlapping the listener,
+ * and 255 is as far away as possible. A distance of 255 does not guarantee
+ * silence; in such a case, you might want to try changing the chunk's volume,
+ * or just cull the sample from the mixing process with Mix_HaltChannel(). For
+ * efficiency, the precision of this effect may be limited (distances 1
+ * through 7 might all produce the same effect, 8 through 15 are equal, etc).
+ * (distance) is an integer between 0 and 255 that specifies the space between
+ * the sound and the listener. The larger the number, the further away the
+ * sound is. Setting the distance to 0 unregisters this effect, since the data
+ * would be unchanged. If you need more precise positional audio, consider
+ * using OpenAL for spatialized effects instead of SDL_mixer. This is only
+ * meant to be a basic effect for simple "3D" games.
+ *
+ * Setting the channel to MIX_CHANNEL_POST registers this as a posteffect, and
+ * the distance attenuation will be done to the final mixed stream before
+ * passing it on to the audio device.
+ *
+ * This uses the Mix_RegisterEffect() API internally.
+ *
+ * Note that unlike most SDL and SDL_mixer functions, this function returns
+ * zero if there's an error, not on success. We apologize for the API design
+ * inconsistency here.
+ *
+ * \param channel The mixer channel to attenuate, or MIX_CHANNEL_POST.
+ * \param distance distance; 0 is the listener, 255 is maxiumum distance away.
+ * \returns zero if error (no such channel or Mix_RegisterEffect() fails),
+ *          nonzero if position effect is enabled. Error messages can be
+ *          retrieved from Mix_GetError().
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_SetDistance(int channel, Uint8 distance);
+
+
+/**
+ * Cause a channel to reverse its stereo.
+ *
+ * This is handy if the user has his speakers hooked up backwards, or you
+ * would like to have a trippy sound effect.
+ *
+ * Calling this function with `flip` set to non-zero reverses the chunks's
+ * usual channels. If `flip` is zero, the effect is unregistered.
+ *
+ * This uses the Mix_RegisterEffect() API internally, and thus is probably
+ * more CPU intensive than having the user just plug in his speakers
+ * correctly. Mix_SetReverseStereo() returns without registering the effect
+ * function if the audio device is not configured for stereo output.
+ *
+ * If you specify MIX_CHANNEL_POST for `channel`, then this effect is used on
+ * the final mixed stream before sending it on to the audio device (a
+ * posteffect).
+ *
+ * Note that unlike most SDL and SDL_mixer functions, this function returns
+ * zero if there's an error, not on success. We apologize for the API design
+ * inconsistency here.
+ *
+ * \param channel The mixer channel to reverse, or MIX_CHANNEL_POST.
+ * \param flip non-zero to reverse stereo, zero to disable this effect.
+ * \returns zero if error (no such channel or Mix_RegisterEffect() fails),
+ *          nonzero if reversing effect is enabled. Note that an audio device
+ *          in mono mode is a no-op, but this call will return successful in
+ *          that case. Error messages can be retrieved from Mix_GetError().
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_SetReverseStereo(int channel, int flip);
+
+/* end of effects API. */
+
+
+
+/**
+ * Reserve the first channels for the application.
+ *
+ * While SDL_mixer will use up to the number of channels allocated by
+ * Mix_AllocateChannels(), this sets channels aside that will not be available
+ * when calling Mix_PlayChannel with a channel of -1 (play on the first unused
+ * channel). In this case, SDL_mixer will treat reserved channels as "used"
+ * whether anything is playing on them at the moment or not.
+ *
+ * This is useful if you've budgeted some channels for dedicated audio and the
+ * rest are just used as they are available.
+ *
+ * Calling this function will set channels 0 to `n - 1` to be reserved. This
+ * will not change channel allocations. The number of reserved channels will
+ * be clamped to the current number allocated.
+ *
+ * By default, no channels are reserved.
+ *
+ * \param num number of channels to reserve, starting at index zero.
+ * \returns the number of reserved channels.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_ReserveChannels(int num);
+
+
+/* Channel grouping functions */
+
+/**
+ * Assign a tag to a channel.
+ *
+ * A tag is an arbitary number that can be assigned to several mixer channels,
+ * to form groups of channels.
+ *
+ * If 'tag' is -1, the tag is removed (actually -1 is the tag used to
+ * represent the group of all the channels).
+ *
+ * This function replaces the requested channel's current tag; you may only
+ * have one tag per channel.
+ *
+ * You may not specify MAX_CHANNEL_POST for a channel.
+ *
+ * \param which the channel to set the tag on.
+ * \param tag an arbitrary value to assign a channel.
+ * \returns non-zero on success, zero on error (no such channel).
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_GroupChannel(int which, int tag);
+
+/**
+ * Assign several consecutive channels to the same tag.
+ *
+ * A tag is an arbitary number that can be assigned to several mixer channels,
+ * to form groups of channels.
+ *
+ * If 'tag' is -1, the tag is removed (actually -1 is the tag used to
+ * represent the group of all the channels).
+ *
+ * This function replaces the requested channels' current tags; you may only
+ * have one tag per channel.
+ *
+ * You may not specify MAX_CHANNEL_POST for a channel.
+ *
+ * Note that this returns success and failure in the _opposite_ way from
+ * Mix_GroupChannel(). We regret the API design mistake.
+ *
+ * \param from the first channel to set the tag on.
+ * \param to the last channel to set the tag on, inclusive.
+ * \param tag an arbitrary value to assign a channel.
+ * \returns 0 if successful, negative on error
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_GroupChannels(int from, int to, int tag);
+
+/**
+ * Finds the first available channel in a group of channels.
+ *
+ * A tag is an arbitary number that can be assigned to several mixer channels,
+ * to form groups of channels.
+ *
+ * This function searches all channels with a specified tag, and returns the
+ * channel number of the first one it finds that is currently unused.
+ *
+ * If no channels with the specified tag are unused, this function returns -1.
+ *
+ * \param tag an arbitrary value, assigned to channels, to search for.
+ * \returns first available channel, or -1 if none are available.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_GroupAvailable(int tag);
+
+/**
+ * Returns the number of channels in a group.
+ *
+ * If tag is -1, this will return the total number of channels allocated,
+ * regardless of what their tag might be.
+ *
+ * \param tag an arbitrary value, assigned to channels, to search for.
+ * \returns the number of channels assigned the specified tag.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_GroupCount(int tag);
+
+/**
+ * Find the "oldest" sample playing in a group of channels.
+ *
+ * Specifically, this function returns the channel number that is assigned the
+ * specified tag, is currently playing, and has the lowest start time, based
+ * on the value of SDL_GetTicks() when the channel started playing.
+ *
+ * If no channel with this tag is currently playing, this function returns -1.
+ *
+ * \param tag an arbitrary value, assigned to channels, to search through.
+ * \returns the "oldest" sample playing in a group of channels
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_GroupNewer
+ */
+extern DECLSPEC int SDLCALL Mix_GroupOldest(int tag);
+
+/**
+ * Find the "most recent" sample playing in a group of channels.
+ *
+ * Specifically, this function returns the channel number that is assigned the
+ * specified tag, is currently playing, and has the highest start time, based
+ * on the value of SDL_GetTicks() when the channel started playing.
+ *
+ * If no channel with this tag is currently playing, this function returns -1.
+ *
+ * \param tag an arbitrary value, assigned to channels, to search through.
+ * \returns the "most recent" sample playing in a group of channels
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ *
+ * \sa Mix_GroupOldest
+ */
+extern DECLSPEC int SDLCALL Mix_GroupNewer(int tag);
+
+/**
+ * Play an audio chunk on a specific channel.
+ *
+ * If the specified channel is -1, play on the first free channel (and return
+ * -1 without playing anything new if no free channel was available).
+ *
+ * If a specific channel was requested, and there is a chunk already playing
+ * there, that chunk will be halted and the new chunk will take its place.
+ *
+ * If `loops` is greater than zero, loop the sound that many times. If `loops`
+ * is -1, loop "infinitely" (~65000 times).
+ *
+ * Note that before SDL_mixer 2.6.0, this function was a macro that called
+ * Mix_PlayChannelTimed() with a fourth parameter ("ticks") of -1. This
+ * function still does the same thing, but promotes it to a proper API
+ * function. Older binaries linked against a newer SDL_mixer will still call
+ * Mix_PlayChannelTimed directly, as they are using the macro, which was
+ * available since the dawn of time.
+ *
+ * \param channel the channel on which to play the new chunk.
+ * \param chunk the new chunk to play.
+ * \param loop the number of times the chunk should loop, -1 to loop (not
+ *             actually) infinitely.
+ * \returns which channel was used to play the sound, or -1 if sound could not
+ *          be played.
+ *
+ * \since This function is available since SDL_mixer 2.6.0 (and as a macro
+ *        since 2.0.0).
+ */
+extern DECLSPEC int SDLCALL Mix_PlayChannel(int channel, Mix_Chunk *chunk, int loops);
+
+/**
+ * Play an audio chunk on a specific channel for a maximum time.
+ *
+ * If the specified channel is -1, play on the first free channel (and return
+ * -1 without playing anything new if no free channel was available).
+ *
+ * If a specific channel was requested, and there is a chunk already playing
+ * there, that chunk will be halted and the new chunk will take its place.
+ *
+ * If `loops` is greater than zero, loop the sound that many times. If `loops`
+ * is -1, loop "infinitely" (~65000 times).
+ *
+ * `ticks` specifies the maximum number of milliseconds to play this chunk
+ * before halting it. If you want the chunk to play until all data has been
+ * mixed, specify -1.
+ *
+ * Note that this function does not block for the number of ticks requested;
+ * it just schedules the chunk to play and notes the maximum for the mixer to
+ * manage later, and returns immediately.
+ *
+ * \param channel the channel on which to play the new chunk.
+ * \param chunk the new chunk to play.
+ * \param loop the number of times the chunk should loop, -1 to loop (not
+ *             actually) infinitely.
+ * \param ticks the maximum number of milliseconds of this chunk to mix for
+ *              playback.
+ * \returns which channel was used to play the sound, or -1 if sound could not
+ *          be played.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_PlayChannelTimed(int channel, Mix_Chunk *chunk, int loops, int ticks);
+
+/**
+ * Play a new music object.
+ *
+ * This will schedule the music object to begin mixing for playback.
+ *
+ * There is only ever one music object playing at a time; if this is called
+ * when another music object is playing, the currently-playing music is halted
+ * and the new music will replace it.
+ *
+ * Please note that if the currently-playing music is in the process of fading
+ * out (via Mix_FadeOutMusic()), this function will *block* until the fade
+ * completes. If you need to avoid this, be sure to call Mix_HaltMusic()
+ * before starting new music.
+ *
+ * \param music the new music object to schedule for mixing.
+ * \param loops the number of loops to play the music for (0 means "play once
+ *              and stop").
+ * \returns zero on success, -1 on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_PlayMusic(Mix_Music *music, int loops);
+
+/**
+ * Play a new music object, fading in the audio.
+ *
+ * This will start the new music playing, much like Mix_PlayMusic() will, but
+ * will start the music playing at silence and fade in to its normal volume
+ * over the specified number of milliseconds.
+ *
+ * If there is already music playing, that music will be halted and the new
+ * music object will take its place.
+ *
+ * If `loops` is greater than zero, loop the music that many times. If `loops`
+ * is -1, loop "infinitely" (~65000 times).
+ *
+ * Fading music will change it's volume progressively, as if Mix_VolumeMusic()
+ * was called on it (which is to say: you probably shouldn't call
+ * Mix_VolumeMusic() on fading music).
+ *
+ * \param music the new music object to play.
+ * \param loop the number of times the chunk should loop, -1 to loop (not
+ *             actually) infinitely.
+ * \param ms the number of milliseconds to spend fading in.
+ * \returns zero on success, -1 on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_FadeInMusic(Mix_Music *music, int loops, int ms);
+
+/**
+ * Play a new music object, fading in the audio, from a starting position.
+ *
+ * This will start the new music playing, much like Mix_PlayMusic() will, but
+ * will start the music playing at silence and fade in to its normal volume
+ * over the specified number of milliseconds.
+ *
+ * If there is already music playing, that music will be halted and the new
+ * music object will take its place.
+ *
+ * If `loops` is greater than zero, loop the music that many times. If `loops`
+ * is -1, loop "infinitely" (~65000 times).
+ *
+ * Fading music will change it's volume progressively, as if Mix_VolumeMusic()
+ * was called on it (which is to say: you probably shouldn't call
+ * Mix_VolumeMusic() on fading music).
+ *
+ * This function allows the caller to start the music playback past the
+ * beginning of its audio data. You may specify a start position, in seconds,
+ * and the playback and fade-in will start there instead of with the first
+ * samples of the music.
+ *
+ * An app can specify a `position` of 0.0 to start at the beginning of the
+ * music (or just call Mix_FadeInMusic() instead).
+ *
+ * To convert from milliseconds, divide by 1000.0.
+ *
+ * \param music the new music object to play.
+ * \param loop the number of times the chunk should loop, -1 to loop (not
+ *             actually) infinitely.
+ * \param ms the number of milliseconds to spend fading in.
+ * \param position the start position within the music, in seconds, where
+ *                 playback should start.
+ * \returns zero on success, -1 on error.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_FadeInMusicPos(Mix_Music *music, int loops, int ms, double position);
+
+/**
+ * Play an audio chunk on a specific channel, fading in the audio.
+ *
+ * This will start the new sound playing, much like Mix_PlayChannel() will,
+ * but will start the sound playing at silence and fade in to its normal
+ * volume over the specified number of milliseconds.
+ *
+ * If the specified channel is -1, play on the first free channel (and return
+ * -1 without playing anything new if no free channel was available).
+ *
+ * If a specific channel was requested, and there is a chunk already playing
+ * there, that chunk will be halted and the new chunk will take its place.
+ *
+ * If `loops` is greater than zero, loop the sound that many times. If `loops`
+ * is -1, loop "infinitely" (~65000 times).
+ *
+ * A fading channel will change it's volume progressively, as if Mix_Volume()
+ * was called on it (which is to say: you probably shouldn't call Mix_Volume()
+ * on a fading channel).
+ *
+ * Note that before SDL_mixer 2.6.0, this function was a macro that called
+ * Mix_FadeInChannelTimed() with a fourth parameter ("ticks") of -1. This
+ * function still does the same thing, but promotes it to a proper API
+ * function. Older binaries linked against a newer SDL_mixer will still call
+ * Mix_FadeInChannelTimed directly, as they are using the macro, which was
+ * available since the dawn of time.
+ *
+ * \param channel the channel on which to play the new chunk, or -1 to find
+ *                any available.
+ * \param chunk the new chunk to play.
+ * \param loop the number of times the chunk should loop, -1 to loop (not
+ *             actually) infinitely.
+ * \param ms the number of milliseconds to spend fading in.
+ * \returns which channel was used to play the sound, or -1 if sound could not
+ *          be played.
+ *
+ * \since This function is available since SDL_mixer 2.6.0 (and as a macro
+ *        since 2.0.0).
+ */
+extern DECLSPEC int SDLCALL Mix_FadeInChannel(int channel, Mix_Chunk *chunk, int loops, int ms);
+
+/**
+ * Play an audio chunk on a specific channel, fading in the audio, for a
+ * maximum time.
+ *
+ * This will start the new sound playing, much like Mix_PlayChannel() will,
+ * but will start the sound playing at silence and fade in to its normal
+ * volume over the specified number of milliseconds.
+ *
+ * If the specified channel is -1, play on the first free channel (and return
+ * -1 without playing anything new if no free channel was available).
+ *
+ * If a specific channel was requested, and there is a chunk already playing
+ * there, that chunk will be halted and the new chunk will take its place.
+ *
+ * If `loops` is greater than zero, loop the sound that many times. If `loops`
+ * is -1, loop "infinitely" (~65000 times).
+ *
+ * `ticks` specifies the maximum number of milliseconds to play this chunk
+ * before halting it. If you want the chunk to play until all data has been
+ * mixed, specify -1.
+ *
+ * Note that this function does not block for the number of ticks requested;
+ * it just schedules the chunk to play and notes the maximum for the mixer to
+ * manage later, and returns immediately.
+ *
+ * A fading channel will change it's volume progressively, as if Mix_Volume()
+ * was called on it (which is to say: you probably shouldn't call Mix_Volume()
+ * on a fading channel).
+ *
+ * \param channel the channel on which to play the new chunk, or -1 to find
+ *                any available.
+ * \param chunk the new chunk to play.
+ * \param loop the number of times the chunk should loop, -1 to loop (not
+ *             actually) infinitely.
+ * \param ms the number of milliseconds to spend fading in.
+ * \param ticks the maximum number of milliseconds of this chunk to mix for
+ *              playback.
+ * \returns which channel was used to play the sound, or -1 if sound could not
+ *          be played.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_FadeInChannelTimed(int channel, Mix_Chunk *chunk, int loops, int ms, int ticks);
+
+/**
+ * Set the volume for a specific channel.
+ *
+ * The volume must be between 0 (silence) and MIX_MAX_VOLUME (full volume).
+ * Note that MIX_MAX_VOLUME is 128. Values greater than MIX_MAX_VOLUME are
+ * clamped to MIX_MAX_VOLUME.
+ *
+ * Specifying a negative volume will not change the current volume; as such,
+ * this can be used to query the current volume without making changes, as
+ * this function returns the previous (in this case, still-current) value.
+ *
+ * If the specified channel is -1, this function sets the volume for all
+ * channels, and returns _the average_ of all channels' volumes prior to this
+ * call.
+ *
+ * The default volume for a channel is MIX_MAX_VOLUME (no attenuation).
+ *
+ * \param channel the channel on set/query the volume on, or -1 for all
+ *                channels.
+ * \param volume the new volume, between 0 and MIX_MAX_VOLUME, or -1 to query.
+ * \returns the previous volume. If the specified volume is -1, this returns
+ *          the current volume. If `channel` is -1, this returns the average
+ *          of all channels.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_Volume(int channel, int volume);
+
+/**
+ * Set the volume for a specific chunk.
+ *
+ * In addition to channels having a volume setting, individual chunks also
+ * maintain a seperate volume. Both values are considered when mixing, so both
+ * affect the final attenuation of the sound. This lets an app adjust the
+ * volume for all instances of a sound in addition to specific instances of
+ * that sound.
+ *
+ * The volume must be between 0 (silence) and MIX_MAX_VOLUME (full volume).
+ * Note that MIX_MAX_VOLUME is 128. Values greater than MIX_MAX_VOLUME are
+ * clamped to MIX_MAX_VOLUME.
+ *
+ * Specifying a negative volume will not change the current volume; as such,
+ * this can be used to query the current volume without making changes, as
+ * this function returns the previous (in this case, still-current) value.
+ *
+ * The default volume for a chunk is MIX_MAX_VOLUME (no attenuation).
+ *
+ * \param channel the channel on set/query the volume on, or -1 for all
+ *                channels.
+ * \param volume the new volume, between 0 and MIX_MAX_VOLUME, or -1 to query.
+ * \returns the previous volume. If the specified volume is -1, this returns
+ *          the current volume. If `chunk` is NULL, this returns -1.
+ *
+ * \since This function is available since SDL_mixer 2.0.0.
+ */
+extern DECLSPEC int SDLCALL Mix_VolumeChunk(Mix_Chunk *chunk, int volume);
+
+/**
+ * Set the volume for the music channel.
+ *
+ * The volume must be between 0 (silence) and MIX_MAX_VOLUME (full volume).
+ * Note that MIX_MAX_VOLUME is 128. Values greater than MIX_MAX_VOLUME are
+ * clamped to MIX_MAX_VOLUME.
+ *
+ * Specifying a negative volume will not change the current volume; as such,
+ * this can be used to query the current volume without making changes, as
+ * this function returns the previous (in this case, still-current) value.
+ *
+ * The default volume for music